User's Guide

Troubleshooting and Maintenance
Configuring the Computer
Corporate Evaluator’s Guide 151
Security Menu
Setting Description Default
User Password is Shows if a user password is set. Clear
Administrator Password
is
Shows if an administrator password is set. Clear
Set User Password Press ENTER to set, change, or clear the user password.
The password can have no more than 8 characters (0-9,
A-Z), and cannot include special or accented characters.
Enter
Set Administrator
Password
Press ENTER to set, change, or clear the administrator
password, which protects BIOS Setup settings. The
password can have no more than 8 characters (0-9, A-Z),
and cannot include special or accented characters.
Enter
Require Password on
Boot
Sets whether a user password is required when the
computer boots. Requires the administrator password for
changes.
Enabled
Internal hard disk drive
lock*
Encodes the current user password (or administrator
password if that is the only password set) on the hard disk
drive.
Disabled
Removable Device Boot Sets whether the computer will attempt to boot from a floppy
drive or other removable device.
Enabled
* Internal hard disk drive lock option is available only if the Boot option is enabled.
Power Menu
Setting Description Default
Backlight Control
When switching to battery power, sets whether the display
brightness reverts to the previous battery-power brightness
(Auto Restore) or to a very low brightness to save power
(Auto Dim).
Auto Restore
Auto Suspend on Undock Sets whether the computer suspends to Standby power
mode after undocking.
When Lid
Closed
Auto Turn-On on Dock Sets whether the computer turns on after docking. Enabled