User Manual

P4000: IQN assigned to the host
P2000/MSA2000 (FC, SAS): WWN for the host port on the host end of this path
P2000/MSA2000 (iSCSI): IQN assigned to the host
Array Port WWN/IQN
P9000/XP: WWN for the storage array port on the storage array end of this path
P6000 EVA: WWN for the storage array port on the storage array end of this path
P4000: IQN used by the host for connecting to this disk on this storage array
P2000/MSA2000 (FC, SAS): WWN for the storage array port on the storage array end
of this path
P2000/MSA2000 (iSCSI): IQN used by the host for connecting to this disk on this storage
array
LUN: LUN used for presenting the storage disk from the storage array port to the host HBA
port
Array Controller: Controller used for this path
Array Port: Storage array's port identifier used for this path
Hostgroup
P9000/XP: Name of the host group containing the HBA WWN on the array port for this
path
P6000 EVA: Name of the host object containing the host WWN for this path
P4000: Name configured for the host's IQN in the management console
P2000/MSA2000: Nickname of the host with the host WWN for this path
Host Access
P9000/XP: Host access level assigned to the volume
NOTE: The P9000 or XP array does not allow host access to be specified on a per-host
or per-path basis.
P6000 EVA: Host access level assigned to the presentation of the disk to the host (for
example, READ/WRITE or READ-ONLY)
P4000: Host access level assigned to the presentation of the disk to the host (for example,
READ/WRITE or READ-ONLY)
P2000/MSA2000: Access setting for volume mapping (for example, READ/WRITE or
READ-ONLY)
Host Mode
P9000/XP: Host mode assigned to the host group
P6000 EVA: Host mode assigned to the P6000 EVA host object
P4000: Not applicable
P2000/MSA2000: Name of the host's profile
Preferred Path
P9000/XP: Not applicable
P6000 EVA: Specifies whether the path uses a port on the controller that is configured
as the preferred path for the vdisk (Yes, No, No preference)
Using the Storage Module for vCenter 49