Owner's Manual

A movie is not visible on an external display
1. If both the computer display and an external display are turned on, press fn+f4 one or more times to
switch between the 2 displays.
2. Configure the monitor settings to make the external display primary:
a. From the Windows desktop, right-click on a blank area of the computer desktop, and select Screen
resolution.
b. Specify a primary display and a secondary display.
NOTE: When using both displays, the DVD image will not appear on any display designated as the
secondary display.
When an external display is connected to the Thunderbolt port, the DVD image will appear on any
connected displays.
The process of burning a disc does not begin, or it stops before completion
●
Be sure that all other programs are closed.
●
Turn off Sleep mode.
●
Be sure that you are using the right kind of disc for your drive.
●
Be sure that the disc is inserted properly.
●
Select a slower write speed and try again.
●
If you are copying a disc, save the information on the source disc to your hard drive before trying to burn
the contents to a new disc, and then burn from your hard drive.
108 Appendix B Troubleshooting ENWW