HP EliteBook 745 G2 HP Notebook PC and EliteBook 755 G2 Notebook PC - Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Customer Self-Repair parts
- Removal and replacement procedures for Authorized Service Provider parts
- Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10
- Computer Setup (BIOS) and MultiBoot in Windows 8.1
- Computer Setup (BIOS) and MultiBoot in Windows 7
- Using Setup Utility (BIOS) in Ubuntu
- Using HP PC Hardware Diagnostics (UEFI)
- Backup and recovery in Windows 10
- Backup and recovery in Windows 8.1
- Backup and recovery in Windows 7
- Backing up, restoring, and recovering in Ubuntu
- Specifications
- Computer specifications–HP EliteBook 745 models
- Computer specifications–HP EliteBook 755 models
- 35.6 cm (14.0 in) HD SVA display specifications
- 35.6 cm (14.0 in) HD+ SVA display specifications
- 35.6 cm (14.0 in) FHD, UWVA display specifications
- 39.6 cm (15.6 in) HD SVA display specifications
- 39.6 cm (15.6 in) FHD SVA display specifications
- Hard drive specifications
- Solid-state drive specifications
- Statement of Volatility
- Power cord set requirements
- Recycling
- Index
Display assembly
NOTE: Non-touch displays are spared at the subcomponent level only. Touch displays are only spared as a
whole (touch display components are not spared).
In non-touch models, you can remove the raw display panel with the display assembly still connected to the
computer. For more information, see Display panel (non-touch) on page 60.
The following section shows how to remove the raw display panel without removing the display assembly
from the computer. See the display section later in this chapter to remove internal components that require
that you remove the display assembly.
Description Spare part number
Display assembly, touch screen (whole assembly)
15 in, FHD, for use in HP EliteBook 755 models 774990-001
14 in, FHD, for use in HP EliteBook 745 models 777325-001
Display enclosure (non-touch models) (includes 4 transceivers with antennas)
Display bezel for use in HP EliteBook 745 models 779682-001
Display bezel for use in HP EliteBook 755 models 779686-001
Display hinges:
For use in HP EliteBook 745 models 730957-001
For use in HP EliteBook 755 models 730819-001
Antenna Kit (includes antenna cables and transceivers):
For use in HP EliteBook 745 models 780080-001
For use in HP EliteBook 755 models 780081-001
Before removing the display assembly, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service door (see Service door on page 45)
b. Battery (see Battery on page 47)
c. Fan (see Fan on page 71)
d. Keyboard (see Keyboard on page 56)
e. Base enclosure (see Internal base enclosure on page 65)
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
Component replacement procedures 89