User Guide - Windows 7

8. Insert the SIM card (1) into the SIM locking hinged connector, and gently push the SIM card until it is
rmly seated. Rotate the hinge (2) down to secure the SIM card into the connector.
NOTE: The SIM card in your computer may look slightly dierent from the illustration in this section.
NOTE: See the image in the service bay to determine which way the SIM card should be inserted into
your computer.
9. Replace the service door.
10. Replace the battery.
NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.
11. Reconnect external power.
12. Reconnect external devices.
13. Turn on the computer.
To remove a SIM card, rotate the SIM connector hinge upward, and then remove the SIM card from the
connector.
Using HP Mobile Connect (select models only)
HP Mobile Connect is a prepaid, mobile broadband service that provides a cost-eective, secure, simple, and
exible mobile broadband connection for your computer. To use HP Mobile Connect, your computer must have
a SIM and the HP Mobile Connect app. For more information about HP Mobile Connect and where it is
available, go to http://www.hp.com/go/mobileconnect.
Using GPS (select models only)
Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location,
speed, and direction information to GPS-equipped systems.
For more information, see the HP GPS and Location software Help.
20 Chapter 3 Connecting to a network