HP Business Notebook and Desktop PC F10 setup overview

,
17
Feature Function Default setting,
if applicable
Reboot
required
 Option ROM Prompt
Displays the Option ROM prompt on POST screen Enabled Yes
 After Power Loss
Specifies system state after power loss Off
Yes
 POST Delay (in seconds)
Specifies amount of delay to add during POST for certain peripherals None Yes
 Remote Wakeup Boot Source
Specifies boot device after a remote wakeup event Local Hard Drive No
 Factory Recovery Boot Support
Enables BIOS support for HP Backup and Recovery tools Disabled Yes
 Bypass F1 Prompt on
Configuration Changes
Allows system to boot without user input after configuration change
(for example, memory size)
Disabled No
BIOS Power-on Specifies time and day(s) when system automatically wakes from the
S5 (off) state
Disabled
Yes
Onboard Devices Specifies a Legacy Device’s IRQ, DMA, and I/O Range settings Serial Port A:
IO=3F8h, IRQ=4
Parallel Port:
IO=378h, IRQ=7,
DMA=1
Printer Mode:
EPP+ECP
Yes
Bus Options Yes
 PCI SERR# Generation
Enables PCI device to generate SERR# (System Error), as defined by
the PCI specification
Enabled Yes
 PCI VGA Palette Snooping
Enables VGA palette registers snooping Disabled Yes
Device Options – All-in-One (AIO) systems Yes
 Turbo Mode
Enables processor feature that optimizes core frequencies can be
optimized for performance based on the load on each core
Enabled
Yes
 Num Lock State at Power-on
Enables Number Lock at boot Off Yes
 LVDS Panel Select
Enables panel type/vendor selection override Automatic Yes
 Internal Speaker
Enables or disables the internal speaker Enabled Yes
 USB EHCI Port Debug
Forces all USB ports to use USB 2 for debugging utilities and other
applications that do not support USB 3
Disabled Yes
 Multi-processor
Enables BIOS to report multiple processor cores to the OS Enabled
Yes
 Hyperthreading
9
Enables hyperthreading capability on Intel processors; some programs
may run better with this feature disabled.
Enabled Yes
 USB Charging Port
The top left-side USB port on AIO systems can be used to charge USB
devices when the system is powered off.
Enabled Yes
Device Options – Other systems Yes
 Turbo Mode
Enables processor feature that optimizes core frequencies can be
optimized for performance based on the load on each core
Enabled Yes
 Num Lock State at Power-on
Enables Num Lock at boot Off
Yes
 Integrated Video
Enables integrated video controller Enabled Yes
 Internal Speaker
Enables or disables the internal speaker Enabled Yes
 USB EHCI Port Debug
Forces all USB ports to use USB 2 for debugging utilities and other
applications that do not support USB 3
Disabled Yes
 Multi-processor
Enables BIOS to report multiple processor cores to the OS Enabled Yes
9
Intel HT Technology (HT) is designed to improve performance of multi-threaded software products and requires a computer system with a processor
supporting HT and an HT-enabled chipset, BIOS and OS. Please contact your software provider to determine compatibility. Not all customers or software
applications will benefit from the use of HT. See http://www.intel.com/info/hyperthreading for more information.