Operation Manual
To remove Web Services using the control panel
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the dashboard area on the home screen).
2.
On the control panel dashboard, touch .
3.
Touch , and then touch Remove Web Services and touch Yes.
To remove Web Services using the EWS
1. Open the EWS. For more information, see Open the EWS.
2. Click the Web Services tab.
3. In the Web Services Settings section, click Remove Web Services.
4. Click Remove Web Services to conrm.
5. Click Yes to remove Web Services from your printer.
Product security features
●
Security statements
●
Firewall
●
Security settings
●
Firmware updates
Security statements
This product supports security standards and protocols that help secure the product, protect information on
your network, and simplify monitoring and maintenance of the product.
For information about HP's secure imaging and printing solutions, visit the HP secure printing website. The
site provides links to white papers and FAQ documents about security features and may include information
about additional security features that are not contained in this document.
Firewall
The HP Embedded Web Server allows you to enable and congure product rewall rules, priorities, templates,
services, and policies. The rewall feature provides a network layer of security on both IPv4 and IPv6
networks. The rewall conguration capability gives you control over IP addresses that are allowed to access
the product. It also lets you set permissions and priorities for digital send, management, discovery, and print
services. All of this helps provide a more secure way of controlling access to the product.
The rewall feature also allows you to disable unused protocols and services. These protocol and services
settings can also be protected from being changed by setting the EWS admin password. These protocols and
services include the following.
ENWW Product security features 29