Operation Manual

4. To verify the changes to the prole, click Save and Test and follow the onscreen instructions.
5. When done, click Apply.
Change account settings (OS X)
1. Open HP Utility. For more information, see Open HP Utility.
2. Click Scan to Email.
The EWS opens. Follow the instructions in Change account settings in the EWS.
Scan to a network folder
●
To set up scan to a network folder
●
To scan to a network folder
To set up scan to a network folder
Set up scan to a network folder in the EWS
1. Open the EWS. For more information, see Open the EWS.
2. On the Scan tab, click Scan to Network Folder, and then click Network Folder Setup.
3.
In the setup page, click , and follow the onscreen instructions for adding network folder proles.
When
nished, click Next .
4. In the authentication page, follow the onscreen instructions to set up credentials for logging into the
network folder. When nished, click Next .
5. In the settings page, follow the onscreen instructions for conguring scan settings, such as paper size
and scan resolution. When nished, click Save.
Set up scan to a network folder in the HP Printer Assistant
1. Open the HP Printer Assistant. For more information, see Open the HP Printer Assistant.
2. On the Scan tab, click Scan to Network Folder Wizard and follow the onscreen instructions.
To scan to a network folder
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the automatic document feeder.
2. On the control panel, touch the Scan application folder.
3. Touch the Network Folder icon, and then navigate to the network folder.
4. If prompted, enter the PIN.
5. Verify or change the information in the Save As and File Name elds.
6. Touch Touch to Preview, and then touch Start Scan.
84 Chapter 7 Copy and scan ENWW