Operation Manual
Table Of Contents
- Printer overview
- Paper trays
- Supplies, accessories, and parts
- Manage the printer
- Solve problems
- Customer support
- Control panel help system
- Restore factory settings
- A “Cartridge is low” or “Cartridge is very low” message displays on the printer control panel
- Printer does not pick up paper or misfeeds
- Clear paper jams
- Introduction
- Jam locations
- Auto-navigation for clearing jams
- Experiencing frequent or recurring paper jams?
- Clear jams in the left door
- Clear jams in Tray 1 (multipurpose tray)
- Clear jams in Tray 2
- Clear jams in Tray 3
- Clear jams in the 3x500-sheet feeder
- Clear jams in the ink-collection unit area
- Clear jams in the output bin
- Improve print quality
- Introduction
- Print from a different software program
- Check the paper-type setting for the print job
- Check cartridge status
- Clean the printer
- Visually inspect the cartridge
- Check paper and the printing environment
- Adjust color settings (Windows)
- Print and interpret the print quality page
- Calibrate the printer to align the colors
- Try a different print driver
- Solve wired network problems
- Introduction
- Poor physical connection
- The computer is using the incorrect IP address for the printer
- The computer is unable to communicate with the printer
- The printer is using incorrect link and duplex settings for the network
- New software programs might be causing compatibility problems
- The computer or workstation might be set up incorrectly
- The printer is disabled, or other network settings are incorrect
- Solve wireless network problems
- Introduction
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Reduce interference on a wireless network
- Index
6. Remove any paper from the feed rollers inside
the printer. First pull the paper to the right to
release it, and then pull it forward to remove it.
O
ff
ic
e
j
e
t
Ent
e
r
p
rise Col
or
X55
6
2
7. Reinsert and close the tray.
Off
i
c
ej
e
t
E
nterprise
C
o
l
o
r
X5
5
6
2
Clear jams in the 3x500-sheet feeder
Use the following procedure to check for paper in all possible jam locations related to the 3x500-sheet
feeder. When a jam occurs, the control panel displays an animation that assists in clearing the jam.
NOTE: The following procedure shows Tray 3. The method to clear jams in Trays 4 and 5 is the same.
1. Open the lower-left door.
O
ff
icejet
E
n
t
er
pr
i
se Col
o
r
X55
6
118 Chapter 6 Solve problems ENWW