Operation Manual
Table Of Contents
- Printer overview
- Paper trays
- Supplies, accessories, and parts
- Manage the printer
- Solve problems
- Customer support
- Control panel help system
- Restore factory settings
- A “Cartridge is low” or “Cartridge is very low” message displays on the printer control panel
- Printer does not pick up paper or misfeeds
- Clear paper jams
- Introduction
- Jam locations
- Auto-navigation for clearing jams
- Experiencing frequent or recurring paper jams?
- Clear jams in the left door
- Clear jams in Tray 1 (multipurpose tray)
- Clear jams in Tray 2
- Clear jams in Tray 3
- Clear jams in the 3x500-sheet feeder
- Clear jams in the ink-collection unit area
- Clear jams in the output bin
- Improve print quality
- Introduction
- Print from a different software program
- Check the paper-type setting for the print job
- Check cartridge status
- Clean the printer
- Visually inspect the cartridge
- Check paper and the printing environment
- Adjust color settings (Windows)
- Print and interpret the print quality page
- Calibrate the printer to align the colors
- Try a different print driver
- Solve wired network problems
- Introduction
- Poor physical connection
- The computer is using the incorrect IP address for the printer
- The computer is unable to communicate with the printer
- The printer is using incorrect link and duplex settings for the network
- New software programs might be causing compatibility problems
- The computer or workstation might be set up incorrectly
- The printer is disabled, or other network settings are incorrect
- Solve wireless network problems
- Introduction
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Reduce interference on a wireless network
- Index
Replace the ink-collection unit
●
Introduction
●
Remove and replace the ink-collection unit
Introduction
The following information provides details about the ink-collection unit for the printer, and it includes
instructions to replace it.
The printer indicates when the ink-collection unit is nearly full and when it is completely full. When it is
completely full, printing stops until the ink-collection unit is replaced.
To purchase a ink-collection unit (part number B5L09A), go to the HP Parts Store at www.hp.com/buy/parts.
NOTE: The ink-collection unit is designed for a single use. Do not attempt to empty the ink-collection unit
and reuse it. Doing so could lead to pigment being spilled inside the printer, which could result in reduced print
quality. After use, return the ink-collection unit to HP’s Planet Partners program for recycling.
Remove and replace the ink-collection unit
1. Open the left door.
2. Remove the ink-collection unit by pulling it out
with both hands. Set the unit aside, upright, on a
piece of paper to prevent spills.
CAUTION: When pulling out the ink-collection
unit, avoid making direct contact with the black
cylinder to prevent pigment smear on skin or
clothes.
50 Chapter 3 Supplies, accessories, and parts ENWW