Maintenance and Service Guide

TouchPad

NOTE: The TouchPad spare part kit includes the TouchPad cable.

Description Spare part number

For use only on computer models equipped with an AMD processor 774393-001

For use only on computer models equipped with an Intel processor 783028-001

Before removing the TouchPad, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the keyboard/top cover (see

Keyboard/top cover on page 34).

Remove the TouchPad:

1. Turn the keyboard/top cover upside down with the front toward you.

2. Remove the two Philllips PM1.9×2.4 broad head screws (1) that secure the TouchPad to the

keyboard/top cover.

NOTE: When removing the TouchPad, make sure the cable is released through the opening (2)

in the keyboard/top cover.

TouchPad