User's Manual

ENGLISH

CDRW

INSTALLATION

(CONT.)

In order to mount the drive inside your PC (or other type

of computer), locate a free 5.25" bay and follow the instructions,

as provided with your computer systems, for installing the drive.

When you are planning to use 8 cm discs your drive should be

mounted horizontaly or you should use an adapter

(for information contact your local supplier).

You have several possibilities to install your IDE data cable

depending on your existing configuration:

(See page 18 for Jumper block)

A) Hard-Disc connected as Master to Primary IDE Port,

CD-ROM connected as Master to Secundary IDE Port:

Connect CDRW 8x4x32 as Slave to Secundary IDE Port.

Primary Port Hard-Disc -

Secundary Port CD-ROM -

MASTER SLAVE

Primary Port Hard-Disc -

Secundary Port CD-ROM CDRW 8x4x32

MASTER SLAVE

Jumper

Block

Existing

PC Configuration

after Installation

01_LAYOUT_GB 22-11-2000 09:21 Pagina 5