Quick Start Manual

Quick Start Guide
37
Filename: ma3ubqs.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: kimt
Revision #: 36 Page: 37 of 148 Printed: 04/03/03 02:04 PM
Basics
7 Place a check in the Alternate
Microphone check box. (This box may be
labeled Mic2 Select, or 1 Mic Boost.)
8 Click Close.
9 Click X (Close) on the upper-right corner of
the Recording Control window.
Adjusting microphone volume
If you need to adjust the volume of the
microphone, whether it is connected to the
front of the PC or to the back, follow the
procedure below:
1 Double-click the Volume icon on the
taskbar. The Volume Control window
opens.
2 In the Volume Control window, select
Options and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place
a check in the Microphone check box.
5 Click OK.
6 Adjust the volume of Microphone Balance.
Note:
If the volume is now acceptable, proceed directly
to step 10.
7 To make finer adjustments to the sound, click
the Advanced button, and then select the
(Microphone) Mic Boost check box. (If you
do not see the Advanced button, select
Options from the Recording Control window,
and then click Advanced Controls.)
8 Click Close.
9 Repeat step 6, if needed.
10 Click X (Close) on the upper-right corner of
the Volume Control window.