Quick Start Manual

Quick Start Guide
31
Filename: sa3usqs.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: billm Last Saved By: kimt
Revision #: 105 Page: 31 of 126 Printed: 10/17/02 03:38 PM
Basics
Standby mode also allows faxes to come
through to the computer, and it enables the PC
to automatically retrieve e-mail messages and
download information from the Internet, if you
have programmed the computer to do so.
To manually put the computer in standby:
1 Press the Standby button on the keyboard.
The screen goes dark, and the computer goes
into standby mode.
2 When you want to use the computer again,
press a key on the keyboard, or press the
Standby button. The screen display reappears
just as you left it.
Another way to manually put the computer into
standby is to:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Click Stand By.
If the computer does not work properly when you
wake it from standby, reset the computer: press
and hold the On button on the front of the PC for
approximately 5 seconds until the system turns
off. Then turn the computer back on.
Note:
Using the On button to reset the system is not
recommended and should be used only as a last
resort.