Quick Start Manual

Quick Start Guide
31
Filename: sa3rwqsK.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: AnnSchmidt Last Saved By: JimL
Revision #: 218 Page: 31 of 126 Printed: 10/22/02 01:21 PM
Basics
Automatic Standby or
Hibernation Mode
To automatically put the computer into standby
or hibernation mode, modify the power
management settings:
1 Click Start on the taskbar.
2 Click Control Panel.
3 Click Performance and Maintenance,
if present.
4 Click Power Options.
5 Check if the auto-hibernation feature is
enabled by clicking the Hibernate tab,
and seeing if a tick is in the Enable hibernation
tick box. If necessary, enable the feature by
clicking the tick box so that a tick appears
in it.
6 If you changed the Enable hibernation tick
box, click Apply.
7 Click the Power Schemes tab to set the
timers for standby and/or hibernation. In the
Power Schemes box, select a power scheme
from the drop-down list. Choose the timers:
■
To turn on auto-standby for the computer,
click a time (such as After 20 minutes)
in the System standby list.
■
To set the timer for auto-hibernation, click the
time to elapse before hibernation (such as
After 1 hour) in the System hibernates list.
Note:
If both standby and hibernation timers are set,
the system hibernation timer must be set for a
longer time than the system standby timer.
8 Click OK.