OEM Guide

Note: This information is Confidential and Proprietary to Creative Labs, Inc. This information is subject to change without prior
notice. Released by OEM Technical Marketing Department. Please direct any inquiries to your regional OEM Sales office. Patent
Pending.
Revision 1.0, 10/25/2000 Page 14
SB AudioPCI 128 – ES1373 Series Specifications
Typical Audio Performance
Frequency Response 20 Hz to 20 kHz (Source: Line in)
(+0/-3dB) 20 Hz to 20 kHz (Source: Mic)
Line-In Voltage Range 0 to 2 Vrms
Line-Out voltage at 0dB 0 to 2 Vrms (10kohms load)
Reference signal 1KHz (measured with wide-band filter 22Hz-22kHz):
Signal to Noise Ratio > 90 dBr (Source: Line-in)
THD+ N .005% (Source: Line-in)
.01% (Source: 35dBu Mic-in)
Microphone Input Range 0 to 100 mVrms
Line-In Impedance 10 kohms
CD Audio-In Impedance 10 kohms
CD Audio-In Input Range 0 to 1 Vrms
Power Consumption (estimated)
+5 Volt Current Consumption 50 mA (Typ)
+12 Volt Current Consumption 75 mA (Typ)
-12 Volt Current Consumption 35 mA (Typ)
Temperature range
Operation 10 to 50 degree C
Non-operating -40 to 125 degree C