Quick Start Manual

Quick Start Guide
97
Filename: sb3rwqsK.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: anns Last Saved By: billm
Revision #: 142 Page: 97 of 138 Printed: 02/05/03 11:09 AM
Recovery
Note:
If your PC has a blank or corrupted hard disk,
you will only see the full system recovery option.
To run the system recovery program:
1 If the PC works, back up all data files that you
want to save onto removable media, such as
CD-RW or diskette. Remove the backup CD or
diskette you’ve made.
2 Turn off the PC:
■
If the PC works: Click Start on the taskbar,
click Turn Off Computer, and then click
Turn Off.
Or
■
Press and hold the On button approximately
5 seconds until the PC turns off.
3 Disconnect all peripheral devices from the
PC except the monitor, the keyboard, and
the mouse.
4 Press the On button to turn on the PC.
5 When the blue screen with the HP Invent logo
appears, press the F1 key on the keyboard
until Entering SETUP is displayed. (You have
only a few seconds to press the F1 key before
the normal startup process continues.) Wait
until the BIOS setup program opens.
6 Press the right arrow key to select Boot.
7 Press the down arrow key to select
Boot Device Priority, and then press Enter
on the keyboard.