Getting Started Guide

Setting Up Sound 19

The connectors for the 6-connector multi-channel speaker system are on the back of

the PC.

Connecting the speaker system to the PC (6-connector)

1 With the speaker system off, assemble the speakers and, if used, the subwoofer.

Refer to the speaker documentation.

2 Turn off the PC.

3 Connect the audio cable plugs from the speaker system subwoofer to the

connectors on the back of the PC. (See the following table.)

4 Turn on the PC.

5 Turn on the speaker system.

6 Configure the audio output for this 6-connector multi-channel speaker system by

performing the following procedure.

Connect speaker cable (plug) for: To PC port (label, name,

color):

Front speakers (or two stereo speakers) Audio line out (E, out, lime green)

Side speakers Side speaker (A, side, gray)

Rear speakers Rear speaker (B, rear, black)

Center speaker/subwoofer Center speaker/subwoofer

(C, c/sub, gold)

Side speaker port

(side)

B Rear speaker port

(rear)

C Center speaker/

subwoofer port

(c/sub)

D Microphone (mic)

E Audio line out (out) for

front speakers

F Audio line in (in)

B C

E F