Important Safety Instructions What Your New Monitor Offers Unpacking Your Monitor Setting Up Your Monitor Adjusting Your Monitor Using Your Monitor Troubleshooting Technical Specifications hp pavilion fx50 P3901 15-inch lcd monitor (15-inch Viewable image) Care and Cleaning Environmental Information Regulatory Information X English How To Install The Drivers
hp pavilion fx50 15” lcd monitor English Notice The information contained in the documents accompanying this product is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
slim and space saving full scan TFT screen that gives an edge to edge image anti-glare surface on/off Switch volume control sub-menu selection & adjustment buttons power status indicator auto adjustment button menu button hp pavilion fx50 P3901 15-inch lcd monitor (15-inch Viewable Image) User’s Guide X English 16.
hp pavilion fx50 15” lcd monitor Imp o rta nt S a fet y Ins tru c t io ns Important Safety Instructions WARNING For your safety always connect equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with the equipment, or one in compliance with your national safety standards. This equipment can be disconnected from the power by removing the power cord from the power outlet.
hp pavilion fx50 15” lcd monitor Wha t Y o ur N ew M o nit o r Off ers What Your New Monitor Offers Your HP monitor is an LCD 15-inch, high resolution, multisynchronous color monitor. Multi-synchronous means that the monitor supports a range of video modes. It is optimized for use with all Hewlett-Packard computers. Your HP color monitor has the following features: A 15-inch Thin Film Transistor (TFT) liquid crystal display. • Support of video modes up to 1024 x 768 at a 75 Hz refresh rate.
hp pavilion fx50 15” lcd monitor Un pack ing Y o ur M o nit o r Unpacking Your Monitor English Check for the following items. If they are missing or damaged, consult your place of purchase immediately.
hp pavilion fx50 15” lcd monitor S ett i ng Up Yo u r M o nit o r Setting Up Your Monitor Where to Place the Monitor Place your monitor on a flat sturdy surface. Ensure the operating site is free from excessive heat and moisture. WARNING Before you connect any cables, or install your HP monitor, refer to the safety Connecting the Cables This monitor is equipped with an auto-sensing power supply for voltage ranges 100 ~ 240V AC, 50 ~ 60 Hz. Only use with the supplied adapter.
English hp pavilion fx50 15” lcd monitor S et ting Up Y o u r M o nit o r 4 Plug the video cable into the video connector at the rear of the monitor. Secure the cable by tightening the thumb screws on the video connector. 5 Connect the audio cables to the connectors according to the following color definitions: Red + Green end ➔ PC Red + Blue end ➔ rear of LCD monitor 6 Connect the power cord to the power source. 7 Turn on the computer and the monitor.
hp pavilion fx50 15” lcd monitor S ett i ng Up Yo u r M o nit o r Changing the Monitor Viewing Position English Your monitor can be rotated to either a landscape or portrait position. 1 Tilt the lower part of the monitor upwards. 2 Rotate the monitor clockwise until the monitor controls are on the left side. 3 Firmly push the lower part of the monitor downwards to secure it in the new position. To rotate your display, you need to install specific software.
hp pavilion fx50 15” lcd monitor H o w T o In sta ll T he Dr iver s How To Install The Drivers In order to take advantage of the Plug & Play functionality of your Windows 95/98/2000 operating system, HP Monitors come with a driver. English To install this driver: Windows 1 Click on Start, select Settings, then click Control Panel. 2 Double click on Display. 95 and 3 Click on the Settings tab. 98 Users 4 Click on Advanced Properties or Advanced... and select the Monitor tab. 5 Click on Change...
hp pavilion fx50 15” lcd monitor Ad just ing Yo ur Monit o r Adjusting Your Monitor A Look at the Control Panel ➁ ➂ ➃ ➄ There are 5 buttons which perform the following operations: ➀ Auto Adjustment button: automatically adjusts the main settings. ➁ Validation (Enter Sub-Menu) button: acts as an enter button, selects sub-menus. ➂ ➃ Volume Control/Select and Adjustment buttons: mute and unmute the speaker when pressed simultaneously. ➄ Menu button.
hp pavilion fx50 15” lcd monitor Ad just ing Y o ur Moni tor Automatic Setup English Using the Auto button and the test pattern on the CD-ROM provided, you can easily optimize your screen performance. 1 Insert the CD-ROM provided into the PC. Run the program D:\auto.exe to display a pattern used for setup. 2 Press the Auto button. Normally, this should produce a stable, centered image. Your optimizer utility also contains driver for Windows 95, Windows 98 or Windows 2000 D:\Drivers\P3901.INF.
hp pavilion fx50 15” lcd monitor Us ing Your M o nit o r Using Your Monitor Setting the Language The OSD menus can be displayed in several different languages. To change your language setting, refer to “Miscellaneous” on page 17. The Auto Button 1 Press the Auto button and the following on-screen menu is displayed: To 2 Press the Auto button again to activate the auto-adjustment feature. You are then prompted to save the auto settings by pressing the button.
hp pavilion fx50 15” lcd monitor Us ing Y o ur M o ni tor Each of these functions is described in turn in this section. ➀ ➁ ➂ ➃ ➄ ➅ English Making Adjustments 1 Press the Menu button to access the main OSD. 2 Use the or buttons to move through the sub-menus, and press to enter the sub-menu. 3 Use the or buttons to move through the various choices within the sub-menu, and validate your choice by pressing the button.
hp pavilion fx50 15” lcd monitor Us ing Your M o nit o r Geometry Hor. (horizontal) Position: adjusts the horizontal position of the display. Ver. (vertical) Position: adjusts the vertical position of the display. Language Select: Deutsch, English, Español, Français, Italiano, Japanese. Phase: adjusts the phase of pixel clock. It can improve the focus of your screen as well. Pixel Clock: adjusts the frequency of the pixel.
hp pavilion fx50 15” lcd monitor Us ing Y o ur M o ni tor 5 Press the Menu button to exit the sub-menu, then press the Menu button to exit the respective sub-menus. 6 Press the Menu button to exit the OSD. Auto Adjustment The Auto button automatically adjusts V-Position, H-Position, Pixel Clock and Phase for an optimal image.
hp pavilion fx50 15” lcd monitor Us ing Your M o nit o r 1 Press the Menu button and use the or buttons to highlight the Color icon. 2 Use the or to choose one of the options listed above. 3 To validate your choice, use the Menu button to exit the submenus until you are prompted to save your changes. Press the button to select Yes. 4 To make changes in User Mode, use the or buttons to highlight the User Mode icon then press the button.
hp pavilion fx50 15” lcd monitor Us ing Y o ur M o ni tor English 6 Use the or buttons to make the required adjustments (the settings are automatically saved). Audio This feature allows you to adjust the volume and mute/unmute the speaker. To make adjustments in the Volume sub-menu: 1 Press the Menu button and then use the the Volume sub-menu, then press the or buttons to locate button. 2 Press the button to choose the required menu item.
hp pavilion fx50 15” lcd monitor Us ing Your M o nit o r To mute/unmute the speaker you can adjust the settings in the submenu, using the or buttons. Use Menu to exit the OSD. English MUTE DISABLE You can press the buttons to simultaneously mute/unmute the speaker. Miscellaneous This functions contains the following menu items: Hor. (horizontal) Position: adjusts the horizontal position of the OSD. Ver. (vertical) Position: adjusts the vertical position of the OSD.
hp pavilion fx50 15” lcd monitor Us ing Y o ur M o ni tor Information: displays current settings: Resolution, Horizontal and Vertical frequency. English To access the Recall function, first select Information, then select Recall from the sub-menu. Recall: If you press , factory preset settings will be recalled.
hp pavilion fx50 15” lcd monitor Us ing Your M o nit o r When the monitor enters power saving mode, the message No Signal is displayed for a few seconds before the screen blanks. In power saving mode the front panel indicator light is amber. To set these power saving modes, refer to the manual that came with your computer.
hp pavilion fx50 15” lcd monitor Tr ouble sh ootin g Troubleshooting Before calling HP check the following: English There is no picture and LED is off: • Check that the monitor is switched on. • Check that the power cord is properly connected. • Check the electrical outlet. • Test and see if monitor works on another PC previously set to another monitor’s supported resolution. There is no picture and the LED is on: • Check that the monitor is not in power saving mode.
hp pavilion fx50 15” lcd monitor T ro u b les ho o ting The picture is not centered: • Adjust your monitor using the Automatic Adjustment function (refer to “Auto Adjustment” on page 14). A pixel consists of one red, one green and one blue sub-pixel. Defective sub-pixels are less visible than defective whole pixels. Defective sub-pixels are small and only visible on a specific background.
hp pavilion fx50 15” lcd monitor Te chni cal Sp ecifi ca tion s Technical Specifications Type Video 15 inch diagonal and viewable image TFT liquid crystal display 0.7 Vp-p analog RGB Synchronization Separated H/V (TTL level) INTERFACE Input Connector 15-pin D-SUB SCANNING FREQUENCY Horizontal Vertical 1024 x 768 (75 Hz) 31–60 kHz 56–75 Hz LIQUID CRYSTAL MONITOR English INPUT SIGNAL MAX.
hp pavilion fx50 15” lcd monitor Car e a nd Cl ea ning Care and Cleaning To maximize the screen life-span of this product and prevent damage to the liquid crystal display, it is recommended that you: Do not let liquid get on or into the monitor. • Do not store or use the monitor in locations exposed to heat, direct sunlight, or extreme cold. • Do not store or use the monitor in locations exposed to high humidity or in a dusty environment. • Do not press sharp or pointed objects against the monitor.
hp pavilion fx50 15” lcd monitor E nviron me nta l Inf o rma tion Environmental Information HP has a strong commitment toward the environment. Your HP monitor has been designed to respect the environment as much as possible. English HP can also take back your old monitor for recycling when it reaches the end of its useful life. HP has a product take-back program in several countries. The collected equipment is sent to one of HP's recycling facilities in Europe or the USA.
hp pavilion fx50 15” lcd monitor R e gula tory In form ati o n Regulatory Information English X English25
hp pavilion fx50 15” lcd monitor Re g ul ato ry Infor mat ion Notice for the USA: FCC Class B Statement English Federal Communications Commission Radio Frequency Interference Statement Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
hp pavilion fx50 15” lcd monitor R e gula tory In form ati o n Notice for Korea Notice for Germany (Deutschland) LpA < 70db am Arbeitsplatz normaler Betrieb nach EN27779: 11.92 Notice for Japan (Class B) TCO 99 Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use.
hp pavilion fx50 15” lcd monitor Re g ul ato ry Infor mat ion There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy.
hp pavilion fx50 15” lcd monitor R e gula tory In form ati o n Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the color-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury2 Mercury is sometimes found in batteries, relays and switches.
