Specifications

hp pavilion fx50 15” lcd monitor
Using Your Monitor
18EnglishEnglish
English
To access the Recall function, first select Information, then select
Recall from the sub-menu.
WARNING
By pressing the button all previous adjustments are lost (refer to
“Adjusting Your Monitor” on page 9 to adjust the monitor again).
Setting the Amount of Displayed Information
To set the amount of displayed information, change the screen
resolution of your computer. The higher the screen resolution, the
more information you can see on the screen. It is recommended that
you use a resolution of 1024 x 768. It is recommended that you use
a refresh rate of 60 Hz. The image refresh rate is the number of times
per second that the image is redrawn.
NOTE LCD technology does not cause any flicker at low refresh rates.
Minimizing Energy Consumption
If your computer supports VESA monitor power management
(available on many HP computers), you can minimize the power
consumed by the monitor. There are two power saving modes:
• Suspend mode (uses less than 5W)
• Sleep mode (uses less than 5W)
Information: displays current settings:
Resolution, Horizontal and Vertical
frequency.
Recall: If you press , factory preset
settings will be recalled. The settings that are
affected by the Recall function are
• Screen Geometry
• Horizontal Frequency
• Vertical Frequency
• Brightness / Contrast
RECALL
EXIT
X