Notebook PC User Guide
© Copyright 2010 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents Index ...................................................................................................................................................................
vi
1 Features Identifying hardware To see a list of hardware installed on the computer: 1. Select Start > Control Panel > System and Security. 2. In the System area, click Device Manager. Use Device Manager to add hardware or modify device configurations. NOTE: Windows® includes the User Account Control feature that improves the security of the computer. You might be prompted for your permission or password for tasks such as installing applications, running utilities, or changing Windows settings.
Components Top components TouchPad Component Function TouchPad Moves the pointer and selects or activates items on the screen. To view or change the pointing device preferences: 2 1. Select Start > Devices and Printers. 2. Right-click the device representing the computer. 3. Select Mouse settings.
TouchPad buttons Item Description Function 1 TouchPad On/Off button Turns the TouchPad on and off. Press and hold the button for two seconds to turn the TouchPad on and off. 2 Left TouchPad button Functions like the left button on an external mouse. 3 Right TouchPad button Functions like the right button on an external mouse. To view or change pointing device preferences: 1. Select Start > Devices and Printers. 2. Right-click the device representing your computer. 3. Select Mouse settings.
Lights Item Description Function 1 TouchPad light Amber—The TouchPad is disabled. 2 Caps Lock light On—The Caps Lock is on. 3 Power light ● On—The computer is on. ● Flashing—The computer is in Sleep. ● Off—The computer is off or in Hibernation. 4 Volume Mute light Amber—The computer sound is off. 5 Wireless light ● White—An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is detected.
Buttons and Fingerprint Reader (select models only) Item Description Function 1 Power button Press the Power button to: ● Turn on the computer. ● Initiate Sleep. ● Exit Sleep. ● Exit Hibernation. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the Power button for at least five seconds to shut down the computer. For more information about the power settings, select Start > Control Panel > System and Security > Power Options.
Keys 6 Item Description Function 1 esc key Press the esc and fn keys at the same time to display system information. 2 E-mail key Opens a new e-mail in the default e-mail client. 3 Media Application key Launches the MediaSmart application. 4 Web Browser key Launches the default web browser. 5 Print key Sends the currently-active document to the default printer. 6 Calculator key Launches the Calculator application.
Front components Description Function Speakers Produce sound. Right-side components Item Description Function 1 USB ports (2) Connect optional USB devices. 2 Optical drive Reads optical discs and, on select models, writes to optical discs. 3 Optical Drive light Flashing—Accessing the optical drive. 4 Hibernate light White—The computer is in Hibernate. 5 Hard Disk Drive light ● White—The hard disk drive is active. ● Amber—The hard disk drive is parked.
Left-side components Item Description Function 1 Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. 2 External Monitor port Connects an external VGA monitor or projector. 3 RJ-45 (network) jack Connects a network cable.
Bottom components Item Description Function 1 Battery bay Holds the battery. 2 Vents (6) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. 3 Battery Release latch Releases the battery from the battery bay.
Display components 10 Item Description Function 1 Internal microphones (2) Record sound. 2 Webcam light On—The webcam is in use. 3 Webcam Records video and captures still photographs.
Wireless antennas (select models only) On select computer models, at least two antennas send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. NOTE: For optimal transmission, keep the areas immediately around the antennas free from obstructions. To review wireless regulatory notices, see the country-specific section of the Regulatory, Safety and Environmental Notices chapter in Help and Support.
Additional hardware components Item Description Function 1 Power cord* Connects an AC adapter to an AC outlet. 2 AC adapter Converts AC power to DC power. 3 Battery* Provides power when the computer is not connected to an external power source. * Batteries and power cords vary in appearance by region and country.
Labels The labels affixed to the computer provide information needed when troubleshooting system problems or traveling internationally with the computer. ● Service tag—Provides important information including: The service tag label is affixed to the bottom of the computer. When contacting technical support, have this information available. Item Description Function 1 Serial number (s/n) An alphanumeric identifier that is unique to each product.
2 Wireless, local area network, and modem Using wireless devices Wireless technology transfers data across radio waves instead of wires. The computer might be equipped with one or more of the following wireless devices: ● Wireless local area network (WLAN) device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
Identifying wireless and network status icons Icon Name Description Wireless (connected) Identifies the location of the wireless light and the wireless key on the computer. Also identifies the HP Wireless Assistant software on the computer and indicates that one or more of the wireless devices are on. Wired network (connected) Indicates that one or more network drivers are installed, and one or more network devices are connected to a wired network.
Using HP Wireless Assistant A wireless device is turned on or off using HP Wireless Assistant. If a wireless device is disabled by Setup Utility, it must be re-enabled by Setup Utility before it can be turned on or off using Wireless Assistant. NOTE: Enabling or turning on a wireless device does not automatically connect the computer to a network or a Bluetooth-enabled device.
Using a WLAN With a WLAN device, access is available to a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. ● A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that accommodate a large number of computers and accessories and can separate critical network functions.
Protecting your WLAN Because the WLAN standard was designed with only limited security capabilities—basically to foil casual eavesdropping rather than more powerful forms of attack—it is essential to understand that WLANs are vulnerable to well-known and well-documented security weaknesses. WLANs in public areas, or “hotspots,” like coffee shops and airports might not provide any security.
Connecting to a WLAN To connect to the WLAN: 1. Be sure that the WLAN device is on. If it is on, the wireless light is illuminated white. If the wireless light is off, press the wireless key. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. Click the Network icon in the notification area at the far right of the taskbar. 3. Select your WLAN from the list. 4. Click Connect. NOTE: If no WLANs are listed, you are out of range of a wireless router or access point.
Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as: ● Computers (desktop, notebook, PDA) ● Phones (cellular, cordless, smart phone) ● Imaging devices (printer, camera) ● Audio devices (headset, speakers) Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network (PAN) of Bluetooth devices.
Connecting to a local area network Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not connect a modem or telephone cable to the RJ-45 (network) jack. To connect the network cable: 1.
3 Pointing devices and keyboard Using pointing devices Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties: 1. Select Start > Devices and Printers. 2. Right-click the device representing the computer. 3. Select Mouse settings. Using the TouchPad The following illustration and table describe the computer TouchPad.
Component Description (2) TouchPad zone Moves the pointer and selects or activates items on the screen. (3) Left TouchPad button Functions like the left button on an external mouse. (4) Right TouchPad button Functions like the right button on an external mouse. Turning the TouchPad on and off The TouchPad is turned on at the factory. When the TouchPad zone is active, the light is off. To turn the TouchPad on and off, quickly double-tap the TouchPad off indicator.
Pinching Pinching allows you to zoom in or out on items such as PDFs, images, and photos. To pinch: ● Zoom in by holding two fingers together on the TouchPad, and then pull the fingers apart to increase an object's size. ● Zoom out by holding two fingers apart on the TouchPad, and then pull the fingers together to decrease an object's size. Rotating Rotating allows you rotate items such as photos and pages. To rotate, move your thumb and forefinger in a circular motion on the TouchPad.
Using the touchscreen (select models only) The touchscreen allows you to make selections or activate items on the screen using your finger. The touchscreen functions with the default calibration or with a calibration set by another user. However, HP recommends calibrating the touchscreen. Calibration optimizes digitizer performance for all users and particularly for left-handed users. Calibrating the touchscreen To calibrate touch: 1. Double-click the calibration desktop icon.
Performing actions on the touchscreen Use a plastic computer pen or your fingernail to perform click or flick actions. The instructions in this section are based on the preferences set at the factory. To modify settings for recognized clicks and flicks select Start > Control Panel > Hardware and Sound > Pen and Touch. Performing clicks To perform clicks on the touchscreen: ● Tap an item to select it as you would with the left button of an external mouse.
Setting touchscreen preferences To set touchscreen preferences: ● For clicks, flicks, and visual feedback, select Start > Control Panel > Hardware and Sound > Pen and Touch. These preferences are specific to the touchscreen and the computer. ● For left-handed or right-handed users, select Start > Control Panel > Hardware and Sound > Tablet PC Settings > General tab. These preferences are specific to the touchscreen and the computer.
Icon Description Plays the previous track of an audio CD or the previous section of a DVD or a BD. Plays, pauses, or resumes an audio CD, a DVD, or a BD. Stops audio or video playback of a CD, a DVD, or a BD. Plays the next track of an audio CD or the next section of a DVD or a BD. Decreases speaker sound incrementally when holding down this key. Increases speaker sound incrementally when holding down this key. Mutes or restores speaker sound. Turns the wireless feature on or off.
Using the hotkeys Hotkeys are combinations of the fn key (1) and either the esc key (2) or an action key (3). Press fn+esc to display information about system hardware components and the system BIOS version number. Depending on the application you are using, pressing fn and one of the action keys opens a specific shortcut menu within that application. To use a hotkey command: ● Press the fn key, and then press the second key of the hotkey command.
Cleaning the TouchPad and keyboard Dirt and grease on the TouchPad cause the pointer to jump around on the screen. To avoid this, clean the TouchPad with a damp cloth, and wash your hands frequently when using the computer. WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner deposits household debris on the keyboard surface.
4 Multimedia Multimedia features The computer includes multimedia features that allow you to listen to music, watch movies, and view pictures.
Identifying your multimedia components Item Description Function 1 Internal digital dual array microphone (2) Records sound. 2 Webcam light Illuminates when video software accesses the webcam. 3 Webcam Records video, and captures still photographs. 4 Volume Down key Decreases the volume. 5 Volume Up key Increases the volume. 6 Volume Mute key Mutes and restores speaker sound. 7 Speakers (2) Produce sound.
Adjusting the volume Adjust the volume using the computer volume keys. ● To decrease volume, press the Volume Down key (1). ● To increase volume, press the Volume Up key (2). ● To mute or restore volume, press the Volume Mute key (3). NOTE: Volume is controlled through the Windows operating system and some programs.
Using the media activity keys The media activity keys control the play of an audio CD or a DVD or BD that is inserted into an external optical drive (purchased separately). 34 ● When an audio CD or a DVD is not playing, press the Play/Pause key to play the disc (2). ● When an audio CD or a DVD is playing, use the following keys: ◦ To play the previous track of an audio CD or the previous section of a DVD, press the Previous Track key (1).
Multimedia software Preinstalled multimedia software allows you to play music, watch movies, and view pictures. Using HP MediaSmart software HP MediaSmart turns the computer into a mobile entertainment center. Enjoy music and DVD and BD movies, view Internet and live TV, and manage and edit your photo collections. NOTE: Use an integrated TV tuner (select models only) or an optional external TV tuner (purchased separately) to watch, record, and pause live TV on the computer.
Audio The computer has a variety of audio features that allow you to: ● Play music using the computer speakers and/or connected external speakers. ● Record sound using the internal microphone or a connected external microphone. ● Download music from the Internet. ● Create multimedia presentations using audio and images. ● Transmit sound and images with instant messaging programs. ● Stream radio programs (select models only) or receiving FM radio signals. ● Create or “burn” audio CDs.
3. Save the file to the desktop. 4. Open Windows Media Player or MediaSmart, and play back the sound. To confirm or change the audio settings on the computer, select Start > Control Panel > Hardware and Sound > Sound. Video The computer has a variety of video features that allow you to: ● Watch movies. ● Play games over the Internet. ● Edit pictures and video to create presentations. ● Connect external video devices. ● Watch TV, including high-definition TV (select models only).
Connecting an HDMI device The computer includes an HDMI (High Definition Multimedia Interface) port. The HDMI port connects the computer to an optional video or audio device, such as a high-definition television, or any compatible digital or audio component. The computer supports one HDMI device connected to the HDMI port, while simultaneously supporting an image on the computer display or any other supported external display.
To return audio to the computer speakers: 1. Right-click the Speakers icon in the notification area at the far right of the taskbar. 2. Click Playback devices. 3. On the Playback tab, click Speakers. 4. Click Set Default. 5. Click OK. Webcam The computer includes an integrated webcam, located at the top of the display. The webcam is an input device that captures and shares video. To use the webcam: 1. Click the HP MediaSmart icon on the desktop. 2.
5 Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory, letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation.
When the computer exits Sleep, the Power light illuminates, and you return to the screen where you entered Sleep. NOTE: If a password is required when exiting Sleep, enter your Windows password at the prompt. Initiating and exiting Hibernation Hibernation initiates after 1,080 minutes (18 hours) of inactivity when running on both battery power and external power, or when the battery reaches a critical battery level. Power settings and timeouts are changed using Power Options in Windows Control Panel.
Viewing the current power plan To view to current power plan: ● Click the Battery Meter icon in the notification area at the far right of the task bar. – or – ● Select Start > Control Panel > System and Security > Power Options. Selecting a different power plan To select a different power plan: ● Click the Battery Meter icon in the notification area at the far right of the task bar, and then select a power plan from the list.
Using external AC power WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. WARNING! Do not charge the computer battery while on board an aircraft. External AC power is supplied through: ● An approved AC adapter ● An optional docking device or expansion product Connect the computer to external AC power: ● When charging or calibrating a battery.
Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment: Connect the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by disconnecting the power cord from the AC outlet (not by disconnecting the power cord from the computer). If the power cord has a 3-pin connector, connect the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter.
Using battery power When a charged battery is in the computer and the computer is not connected to external power, the computer runs on battery power. When the computer is connected to external AC power, the computer runs on AC power. If the computer contains a charged battery and is running on external AC power supplied through the AC adapter, the computer switches to battery power if the AC adapter is disconnected from the computer.
Inserting or removing the battery CAUTION: Removing a battery that is the sole power source causes loss of information. To prevent loss of information, initiate Hibernation or shut down the computer through Windows before removing the battery. To insert the battery: 1. Turn the computer upside down on a flat surface. 2. Insert the battery into the battery bay (1) and rotate it downward until it is seated (2). The battery release latch automatically locks the battery into place.
Charging a battery WARNING! Do not charge the computer battery while on board aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, an optional expansion product, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.
Managing low battery levels The information in this section describes the alerts and system responses set at the factory. Some low-battery alerts and system responses can be changed using Power Options in Windows Control Panel. Preferences set using Power Options do not affect lights. Identifying low battery levels If a low battery level is not resolved, the computer enters a critical battery level.
Calibrating a battery Calibrate the battery when: ● The battery charge displays seem inaccurate. ● You observe a significant change in battery run time. A heavily used battery should only be calibrated once a month. Do not calibrate a new battery. To calibrate the battery: 1. Fully charge the battery. WARNING! Do not charge the computer battery while on board an aircraft. NOTE: The battery charges while the computer is off or in use, but it charges faster when the computer is off.
3. Discharge the battery. To discharge the battery: a. Disconnect the computer from the external power source, but do not shut down the computer. b. Run the computer on battery power until the battery is discharged. The computer must remain on while the battery is being discharged. The battery discharges whether or not you are using the computer, but the battery discharges faster while you are using it. 4.
Conserving battery power To conserve battery power: ● Select Start > Control Panel > System and Security > Power Options > Power Saver power plan. ● Shut down wireless and local area network (LAN) connections and exit modem applications when you are not using them. ● Disconnect external devices that are not connected to an external power source when you are not using them. ● Stop, disable, or remove any external media cards that you are not using.
Switching between graphics modes (select models only) The computer is equipped with switchable graphics and has two modes for processing graphics. When switching from AC power to battery power, the computer switches from High-performance mode to Power-saving mode to conserve battery life. Similarly, when switching from battery power to AC power, the computer switches back to the High-performance mode.
If the computer is unresponsive and you are unable to use the recommended shutdown procedures, try the following emergency procedures: 1. Press ctrl+alt+delete, and then press the Power button. 2. Press and hold the Power button for at least five seconds. 3. Disconnect the computer from external power, and remove the battery.
6 Drives Handling drives Drives are fragile computer components that must be handled with care. Adhere to the following cautions before handling drives: CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information: Before moving a computer that is connected to an external hard drive, initiate Sleep and allow the screen to clear, or properly disconnect the external hard drive.
Optical drive The computer includes an optical drive that expands the functionality of the computer. The optical drive allows you to read data discs, play music, and watch movies. If the computer includes a Blu-ray Disc (BD) ROM Drive, then high-definition video can also be watched. Identifying the installed optical drive To identify an optical drive: 1. Select Start > Computer. A list of all the drives installed in the computer appears. 2. Identify the optical drive installed in the computer.
Selecting the right disc (CDs, DVDs, and BDs) CDs, used to store digital data, are also used for commercial audio recordings and are convenient for your personal storage needs. DVDs and BDs are used primarily for movies, software, and data backup purposes. DVDs and BDs are the same form factor as CDs, but have a much higher storage capacity. NOTE: The optical drive might not support all types of optical discs.
Blu-ray discs (BD) NOTE: Blu-ray is a new format containing new technologies. Certain disc, digital connection, compatibility, and/or performance issues might arise, and do not constitute defects in the product. Flawless playback on all systems is not guaranteed. BD is a high-density optical disc format for the storage of digital information, including high-definition video. A single-layer Blu-ray disc stores 25 GB, over five times the storage capacity of a single-layer 4.7 GB DVD .
NOTE: For best results, be sure that the AC adapter is connected to an external power source while playing a BD. Configuring AutoPlay To configure AutoPlay: 1. Select Start > Default Programs > Change AutoPlay settings. 2. Confirm that the Use AutoPlay for all media and devices check box is selected. 3. Click Choose a default, and then select one of the available options for each media type listed. NOTE: Choose HP MediaSmart to play DVDs. 4. Click Save.
Observing the copyright warning It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyrightprotected material, including computer programs, films, broadcasts, and sound recordings. Do not use this computer for such purposes. CAUTION: To prevent loss of information or damage to a disc: Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc while the computer is running on battery power.
Creating (burning) a CD or DVD CAUTION: Observe the copyright warning. It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyright-protected material, including computer programs, films, broadcasts, and sound recordings. Do not use this computer for such purposes. If the computer includes a CD-RW, DVD-RW, or DVD±RW optical drive, use software such as Windows Media Player or CyberLink Power2Go to burn data, video, and audio files, including MP3 and WAV music files.
Removing a CD, DVD, or BD To remove an optical disc: 1. Press the release button on the drive bezel to release the disc tray (1). 2. Gently pull out the tray until it stops (2). 3. Remove the disc from the tray by gently pressing down on the spindle while lifting the outer edges of the disc (3). Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 4.
Using external drives Removable external drives expand storing options and information access. A USB mouse can be connected to the system using the ports on an optional docking device or optional expansion product. USB drives include: ● 1.
Improving hard drive performance Using Disk Defragmenter As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates the fragmented files and folders on the hard drive so that the system runs more efficiently. After starting Disk Defragmenter, it works without supervision. Depending on the size of the hard drive and the number of fragmented files, Disk Defragmenter might take more than an hour to complete.
Using HP ProtectSmart Hard Drive Protection HP ProtectSmart Hard Drive Protection protects the hard drive by parking the drive and halting I/O requests under one of the following conditions: ● You drop the computer. ● You move the computer with the display closed while the computer is running on battery power. After one of these events, HP ProtectSmart Hard Drive Protection returns the hard drive to normal operation.
Before moving the computer, HP recommends shutting down the computer or initiating Sleep or Hibernation. Using HP ProtectSmart Hard Drive Protection software The HP ProtectSmart Hard Drive Protection software: ● Enables and disables HP ProtectSmart Hard Drive Protection. NOTE: Depending on your user privileges, you might not have the rights to enable or disable HP ProtectSmart Hard Drive Protection. Additionally, members of an Administrator group can change the privileges for non-Administrator users.
Replacing a drive in the primary hard drive bay CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on or in Sleep or Hibernation. If you are not sure whether the computer is off or in Hibernation, turn on the computer by pressing the Power button, and then shut down the computer through the operating system.
10. Using the tab (2) on the right side of the hard drive, lift the hard drive to a 45-degree angle, and then remove the hard drive (3) from the computer. To install the primary hard drive: 1. Insert the hard drive into the hard drive bay (1). 2. Using the tab (2), pull the hard drive to the right so that the rubber spacers tuck into the openings on the right side of the hard drive bay. 3. Connect the hard drive cable (3) to the hard drive connector on the system board. 4.
6. Tighten the hard drive cover screws (3). 7. Replace the battery. 8. Turn over the computer. 9. Connect external devices to the computer. 10. Connect the computer to AC power. 11. Turn on the computer.
7 External devices Using a USB device A USB port connects an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional expansion product. Some USB devices might require additional support software, which is usually included with the device. For more information about device-specific software, see the manufacturer's instructions. The computer has 3 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices.
Removing a USB device CAUTION: To prevent loss of information or an unresponsive system, adhere to the instructions in “Removing a USB device.” CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To remove a USB device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right of the taskbar.
Connecting an eSATA device CAUTION: To prevent damage to an eSATA port connector, use minimal force to connect an eSATA device. To connect an eSATA device to the computer, connect the eSATA cable for the device to the eSATA port. A sounds alerts you that the device is connected to the computer.
Removing an eSATA device CAUTION: To prevent loss of information or an unresponsive system, adhere to the instructions in “Removing an eSATA device.” CAUTION: To prevent damage to an eSATA connector, do not pull on the cable to remove the eSATA device. To remove an eSATA device: 1. Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right of the taskbar.
8 External media cards Using Digital Media Slot cards Optional digital cards provide secure data storage and convenient data sharing. These cards are used with digital media-equipped cameras and PDAs, as well as with other computers.
2. Insert the card into the Digital Media Slot, and then push in on the card until it is firmly seated. A sounds alerts you when a device is detected, and a menu of options appears. Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, adhere to the instructions in “Removing a digital card.” NOTE: To stop a data transfer, click Cancel in the operating system Copying window. To remove a digital card: 1.
9 Memory modules The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer is upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, disconnect the power cord and remove all batteries before installing a memory module.
8. Lift the memory module compartment cover (2) away from the computer. 9. If replacing a memory module, remove the existing memory module by: a. Pulling away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasping the edge of the memory module (2), and gently pulling the module out of the memory module slot.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module, and do not bend the memory module. a. Aligning the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, pressing the module (2) into the memory module slot until it is seated. c.
15. Turn over the computer. 16. Connect external devices to the computer. 17. Connect the computer to AC power. 18. Turn on the computer.
10 Security Protecting the computer Standard security features provided by the Windows operating system and the non-Windows Setup Utility protect your personal settings and data from a variety of risks.
Using passwords A password is a group of characters that you choose to secure your computer information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords are set in Windows or in the non-Windows Setup Utility preinstalled on the computer. CAUTION: To prevent being locked out of the computer, record each password set.
Setting passwords in Setup Utility Password Function Administrator password ● Protects access to Setup Utility. ● After this password is set, it is entered each time you access Setup Utility. CAUTION: If you forget your administrator password, Setup Utility cannot be accessed. Power-on password ● Protects access to the computer contents. ● After this password is set, it must be entered each time you turn on or restart the computer, or exit Hibernation.
Managing an administrator password To set, change, or delete this password: 1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu message appears in the lower left corner of the screen, press the f10 key. – or – Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu message appears in the lower left corner of the screen, press the esc key. When the Startup Menu appears, press the f10 key. 2. 3.
Managing a power-on password To set, change, or delete the power-on password: 1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu message appears in the lower left corner of the screen, press the f10 key. – or – Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu message appears in the lower left corner of the screen, press the esc key. When the Startup Menu appears, press the f10 key. 2. 3.
Using antivirus software When using the computer to access e-mail, a network, or the Internet, the computer is exposed to viruses. Computer viruses disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software detects most viruses, destroys them, and in most cases, repairs any damage caused. To provide ongoing protection against newly discovered viruses, keep antivirus software upto-date.
Installing critical security updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software might have become available after the computer was shipped. To be sure that all available updates are installed on the computer: ● Run Windows Update after you set up the computer.
Using the fingerprint reader (select models only) NOTE: The location of the fingerprint reader varies by computer model. Locating the Fingerprint Reader The Fingerprint Reader is a small metallic sensor that is located: ● Near the bottom of the TouchPad ● On the right side of the keyboard ● On the upper-right side of the display ● On the left side of the display Depending on the computer model, the Fingerprint Reader might be oriented horizontally or vertically.
Registering fingerprints A Fingerprint Reader allows you to log on to Windows using a fingerprint that you have registered using DigitalPersona Personal software, instead of using a Windows password. To register one or more fingerprints: 1. In Windows, click the DigitalPersona Personal icon in the notification area at the far right of the taskbar. 2. Read the welcome text, and then click Next. The Verify Your Identity window appears. 3.
Using your registered fingerprint to log on to Windows To log on to Windows using your fingerprint: 88 1. After you register your fingerprints, restart Windows. 2. Swipe any of your registered fingers to log on to Windows.
11 Troubleshooting Cannot connect to a WLAN Before troubleshooting a network connection problem, be sure that device drivers are installed for all wireless devices. NOTE: Wireless networking devices are included with select computer models only. If wireless networking is not listed in the feature list on the side of the original computer package, add wireless networking capability to the computer by purchasing a wireless networking device.
Cannot connect to a preferred network Windows automatically repairs a corrupted WLAN connection: ● If there is a Network icon in the notification area, right-click the icon, and then click Troubleshoot problems. Windows resets your network device and attempts to reconnect to one of the preferred networks. ● If there is no Network icon in the notification area: 1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2.
If provided with new wireless network keys and SSID, and if you have previously connected to that network, follow the steps below to connect to the network: 1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2. In the left panel, click Manage wireless networks. A list showing the available WLANs appears. If you are in a hotspot where several WLANs are active, multiple networks appear. 3.
3. Remove the disc from the tray by gently pressing down on the spindle while lifting the outer edges of the disc (3). Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the disc tray, and then place the disc in a protective case. The computer does not detect the CD, DVD, or BD drive If Windows does not detect an installed device, the device driver software might be missing or corrupted.
● Scann for hardware changes. Windows scans your system for installed hardware and installs any required drivers ● Click Properties to verify that the device is working properly ◦ The Properties window provides details about the device to help you troubleshoot issues ◦ Click the Driver tab to update, disable, or uninstall drivers for this device A CD, DVD, or BD does not play To play a CD, DVD, or BD: ● Save your work and close all open programs before playing a disc.
A CD, DVD, or BD does not play automatically 1. Click Start > Default Programs > Change AutoPlay Settings. 2. Confirm that the Use AutoPlay for all media and devices check box is selected. 3. Click Save. A disc should now start automatically when it is inserted into the optical drive. A DVD or BD movie stops, skips, or plays erratically ● Clean the disc. ● Conserve system resources by: ◦ Logging off the Internet. ◦ Changing the color properties of the desktop. 1.
● Be sure that the disc is inserted properly. ● Select a slower write speed and try again. ● If copying a disc, save the information on the source disc to your hard drive before trying to burn the contents to a new disc, and then burn from the hard drive. ● Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device Manager. A DVD or BD playing in Windows Media Player produces no sound or display Use MediaSmart to play a DVD or BD.
3. Click your specific product from the models listed. 4. Click the Windows 7 operating system. 5. When the list of drivers is displayed, click an updated driver to open a window containing additional information. 6. Click Install now to install the updated driver without downloading the file. – or – Click Download only to save the file to the computer. When prompted, click Save and then select a storage location on the hard drive.
Index A AC adapter connecting 44 identifying 12 action keys adjusting volume 28 audio CD, DVD, or BD controls 28 decrease screen brightness 27 Help and Support 27 increase screen brightness 27 muting speaker sound 28 switching screen image 27 using 27 volume 33 wireless 28 administrator password creating 82 entering 82 managing 82 airport security devices 54 antennas 11 antivirus software 84 applications key, Windows 6 audio devices, connecting external 36 audio features 36 audio functions, checking 36 aud
inserting 73 removing 74 stopping 74 digital dual array microphones, identifying 32 Disk Cleanup software 63 Disk Defragmenter software 63 disk performance 63 diskette drive 62 display image, switching 27 drive light 64 drive media 40 drives caring for 54 diskette 62 external 62 hard 62, 66, 67 optical 62 See also hard drive; optical drive DVD burning 60, 94 changing region setting 58 copying 59 playing 57 removing 61 DVD drive 62 DVD region settings 58 E earbuds 32 encryption 18 entering a power-on passwor
M maintenance Disk Cleanup 63 Disk Defragmenter 63 managing a power-on password 83 managing an administrator password 82 media activity keys 34 media controls, keys 28 memory module inserting 76 removing 76 memory module compartment cover removing 76 replacing 77 memory module compartment, identifying 9 microphones, internal 32 Microsoft Certificate of Authenticity label 13 minimizing interference 91 modem approval label 13 monitor port, external 8 monitor, connecting 37 mouse, external connecting 27 settin
touch screen performing actions 26 TouchPad buttons 3 gestures 22 identifying 2 using 22 TouchPad gestures pinching 24 rotating 24 scrolling 23 zooming 24 TouchPad light, identifying 4, 22 TouchPad On/Off button 3 TouchPad right/left buttons, identifying 23 TouchPad, identifying 22 touchscreen calibrating 25 clicks and flicks 26 performing screen actions 26 preferences 27 traveling with the computer modem approval label 13 wireless certification labels 13 troubleshooting burning discs 94 device driver 95 di
