- Hewlett-Packard High Definition 23-inch LCD Monitor User's Guide

4–10 User’s Guide
Operating the Monitor
Enhancing the Video Function
The monitor includes a zoom feature that allows you to
adjust the viewable image to full screen display. It enhances
video performance by changing the screen’s aspect ratio,
the ratio of the picture’s width to its height, to get 4 to 3
(standard broadcast) and 16 to 9 (widescreen) formats. The
zoom feature is available when the signal input selection is
set to super video or component video.
To use the zoom feature:
1. Press the Input button on the front panel of the monitor to
select one of the following video sources: S-video or
Component Video.
2. Press the Menu button on the front panel of the monitor to
launch the On Screen Display (OSD) Main Menu.
3. Select Image Control from the OSD Main Menu. When
the Image Control menu opens, scroll down to select
Image Zoom.
4. In the Image Zoom menu, use the OSD up and down
buttons on the front panel to select and highlight the
desired zoom setting:
❏ Zoom Off — turns off the Image Zoom feature and
defaults to the 1:1 format.
❏ Zoom On 1 — optimizes the image for 4:3 format
sources such as standard broadcast formats and the
full screen DVD format.
❏ Zoom On 2 — optimizes the image for 16:9 format
sources such as widescreen broadcast and DVD
format.