User's Manual

Service Reference Guide 431672-001 6–21

Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis

7. Remove the screws 1 that secure Floppy drive and Optical drive.

Removing the Optical Drive or Diskette Drive

To replace the drive, reverse the removal procedures.

✎

When replacing the drive, transfer the four screws from the old drive to the new one. The screws

take the place of drive rails.

6.8.5 Installing an Optional Optical Drive - SFF chassis

To install an optional optical drive:

1. Remove the optical drive if present.

2. Install the guide screws as indicated.

CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the

internal components of the drive.