User Guide

www.hp.com/photosmart 19
Using the Flash
When the camera is turned on, the flash setting defaults to Auto Flash. The flash
setting is indicated by an icon on the status LCD:
To adjust the flash:
1. Slide the mode switch up to the camera icon.
2. Press the menu dial to display the Capture menu on the image LCD.
3. Turn the menu dial to highlight the current Flash icon, then press the menu dial.
4. Turn the menu dial to highlight a Flash setting, then press the menu dial.
Auto Flash The camera
determines the need for a flash
based on lighting conditions.
Auto Flash with Red-eye
reduction Minimizes the occurrence of
red-eye in photos of people or animals.
The flash goes off twice—once to
condition the subject’s eyes for the flash,
and a second time to take the photo.
Flash Off Set the flash to Off
when you want to be sure the flash
is not used.
Fill Flash Set the flash to Fill when the
lighting for the entire photo is sufficient,
but the lighting for the subject is not, as
in a backlighting situation.
BlitzUG.book Page 19 Wednesday, July 12, 2000 2:59 PM