User Guide

20 hp photosmart 210 digital camera user’s guide
Using the Focus
The HP PhotoSmart 210 digital camera default setting is Auto Focus. You can change
the camera setting to Macro for a subject that is very close to the camera. The focus
setting is indicated by an icon on the status LCD.
To change the focus setting:
1. Slide the mode switch up to the camera icon.
2. Press the menu dial to display the Capture menu on the image LCD.
3. Turn the menu dial to highlight the current Focus icon, then press the menu dial.
4. Turn the menu dial to highlight the Macro or Auto Focus icon, then press the
menu dial.
Note: The focus setting is retained until it is changed or the camera is turned off.
Auto Focus The camera will automatically focus
on the subject in the center of the viewfinder from
2 feet (.6m) to infinity.
Macro For use on subjects that are within 4
inches to 3 feet (10cm to 1m) of the camera lens.
BlitzUG.book Page 20 Wednesday, July 12, 2000 2:59 PM