User Guide

www.hp.com/photosmart 39
3. Insert the new memory card so the side with pin-holes is placed into the camera
first and the front of the card faces the image LCD.
4. Gently push the memory card all the way into the camera.
5. Close the memory card door.
To make sure the memory card is correctly installed:
Determining if a Memory Card is Full
A CompactFlash memory card is full when the camera’s status LCD indicates there are
zero photos available to be taken and the CompactFlash memory card icon blinks.
The photo quality setting determines the number of photos the memory card can hold.
To increase the amount of photos you can store on the memory card, reduce the photo
quality setting. See “Changing the Photo Quality” on page17.
• Slide the mode switch up to the camera icon to turn the camera on.
If the CompactFlash Memory Card icon on the status LCD is blinking, there is a
problem with the memory card. See “Chapter 9: Troubleshooting and
Assistance” on page51.
BlitzUG.book Page 39 Wednesday, July 12, 2000 2:59 PM