HP Photosmart 3200 All-in-One series Benutzerhandbuch Cover image: replace this guideline area with either a cropped product photograph or a straight-on, front-view illustration.
HP Photosmart 3200 All-in-One Series Benutzerhandbuch
© Copyright 2005 Hewlett-Packard Development Company, L.P. Die hierin enthaltenen Informationen können ohne Ankündigung geändert werden. Die Reproduktion, Änderung oder Übersetzung ist ohne schriftliche Genehmigung nicht gestattet, mit Ausnahme der in den Urheberrechten festgelegten Fälle. technische oder redaktionelle Fehler und Auslassungen in diesem Dokument. 1.
Inhalt 1 2 3 4 5 6 7 8 Übersicht über den HP All-in-One ......................................................................5 Der HP All-in-One auf einen Blick ..........................................................................5 Übersicht über das Bedienfeld ...............................................................................7 Übersicht über die Menüs ....................................................................................
9 10 11 12 13 14 15 2 Ändern der Kopiereinstellungen ..........................................................................89 Anzeigen der Vorschau Ihres Kopierauftrags ......................................................90 Erstellen randloser Kopien von Fotos ..................................................................91 Zuschneiden eines Originals ...............................................................................92 Anhalten des Kopiervorgangs ..............................
Inhalt Stromversorgung ...............................................................................................147 Umgebungsbedingungen ................................................................................... 147 Zusätzliche Spezifikationen ...............................................................................147 Programm zur umweltfreundlichen Produktherstellung .....................................147 Rechtliche Hinweise ..........................................................
4 HP Photosmart 3200 All-in-One Series
1 Auf viele Funktionen des HP All-in-One können Sie ohne Einschalten des Computers zugreifen. Sie können Aufgaben wie das Anfertigen einer Kopie oder das Drucken von Fotos von einer Speicherkarte oder einem Speichergerät mit Ihrem HP All-in-One schnell und einfach ausführen. In diesem Kapitel werden die HP All-in-One Hardwarefunktionen, die Bedienfeldfunktionen und der Zugriff auf die HP Image Zone-Software beschrieben.
Kapitel 1 Übersicht (Fortsetzung) Nummer Beschreibung 2 Verlängerung des Ausgabefachs 3 Ausgabefach (Blatt) 4 Papierquerführung für Hauptfach 5 Bedienfeld: Ermöglicht den Zugriff auf die Funktionen des HP All-in-One. Weitere Informationen zu den Tasten auf dem Bedienfeld finden Sie unter Funktionen des Bedienfelds des HP Photosmart 3200 All-in-One Series. 6 Bedienfeldhebel: Drücken Sie diesen Hebel, um das Bedienfeld nach oben oder unten zu drehen.
Beschreibung 18 Netzkabel für Dia- und Negativlampe: Über dieses Kabel wird die Lampe mit Strom versorgt, die zum Scannen transparenter Objekte wie Dias und Negative dient. 19 Ethernet-Anschluss und Ethernet-LEDs: Dienen zum Anschluss an ein verkabeltes Netzwerk.
Kapitel 1 Übersicht (Fortsetzung) Nummer Name und Beschreibung 4 HP Instant Share: Sendet Bilder an bzw. empfängt sie von einem HP All-in-One im Netzwerk. Wenn der HP All-in-One über ein USB-Kabel angeschlossen ist, können Sie Bilder mit der HP Instant Share-Software auf Ihrem Computer senden. 5 Photo-Index: Druckt einen Photo-Index, wenn eine Speicherkarte oder ein Speichergerät im HP All-in-One eingesetzt ist.
(Fortsetzung) Name und Beschreibung 17 Warn-LED: Zeigt aufgetretene Probleme an. Weitere Informationen sehen Sie auf dem Farbdisplay. 18 Scannen: Ruft das Menü Scannen an oder Scannen (in Abhängigkeit davon, ob der HP All-in-One über ein USB-Kabel oder Netzwerk mit dem Computer verbunden ist) zur Auswahl von Optionen auf bzw. entfernt es aus der Anzeige. Wählen Sie die Scanfunktion aus. Wenn die Taste leuchtet, ist die Scanfunktion aktiviert.
Kapitel 1 (Fortsetzung) Symbol Beschreibung Übersicht Zeigt an, dass eine HP Instant Share-Nachricht empfangen wurde. Wenn kein HP Instant Share-Symbol vorhanden ist, wurde keine neue Mail empfangen oder HP Instant Share wurde nicht eingerichtet. Weitere Informationen zum Einrichten von HP Instant Share finden Sie unter Empfangen von Bildern von anderen Personen. Wenn das HP Instant Share-Symbol nicht blau, sondern grau dargestellt wird, ist die Funktion Automatische Prüfung deaktiviert.
Menü "Film" Übersicht Die folgenden Optionen sind im Menü Film verfügbar, wenn Sie auf dem Bedienfeld die Taste Film drücken. 1. Scannen an Computer 2. Scannen an Speichergerät 3. Anzeigen und Drucken 4. Originaltyp 5. Verwendung von Negativen 6. Verwendung von Dias Menü "Photo-Index" Die folgenden Optionen sind im Menü Photo-Index verfügbar, wenn Sie auf dem Bedienfeld die Taste Photo-Index drücken.
Kapitel 1 Menü "Scannen an" Übersicht Die folgenden Optionen sind im Menü Scannen an verfügbar, wenn Sie auf dem Bedienfeld die Taste Scannen an drücken. Dieses Menü erscheint nur beim Drücken der Taste Scannen, wenn der HP All-in-One über ein USB-Kabel mit dem Computer verbunden ist. Welche Optionen in diesem Menü verfügbar sind, hängt von den Softwareanwendungen ab, die auf dem Computer installiert sind.
1. Bericht drucken 2. Extras Übersicht 3. Voreinstellungen 4. Netzwerk 5. HP Instant Share 5. Bluetooth Hinweis Die Option "Bluetooth" ist in diesem Menü nur verfügbar, wenn Sie einen HP Bluetooth-Adapter in den vorderen USB-Anschluss eingesetzt haben. Menü "Funktion auswählen" Die folgenden Optionen im Menü Funktion auswählen sind verfügbar, wenn Sie auf dem Bedienfeld die Taste Fotofach drücken.
Kapitel 1 Übersicht So geben Sie Text über die eingeblendete Tastatur ein 1. Markieren Sie mit Hilfe von , , und das gewünschte Element, um einen Buchstaben, eine Zahl oder ein Symbol über die eingeblendete Tastatur auszuwählen. So geben Sie Klein- und Großbuchstaben, Zahlen und Symbole ein – Um Buchstaben in Kleinschreibung einzugeben, markieren Sie die Taste abc auf der eingeblendeten Tastatur, und drücken Sie OK.
Übersicht Ihrem Computer zugreifen, Sie werden jedoch nicht in der Lage sein, die Funktionen von HP Instant Share über das Bedienfeld auszuführen. Dies ist nur mit der Vollversion von HP Image Zone möglich. Wenn die HP Image Zone-Software in diesem Handbuch und in der HP Image Zone Hilfe (online) genannt wird, sind beide Versionen von HP Image Zone gemeint, solange nichts anderes angegeben ist.
Kapitel 1 Übersicht Hinweis Auf einem Macintosh-Computer hängen die Funktionen, die in der HP Image Zone-Software verfügbar sind, von den installierten Geräten ab. Tipp Nachdem Sie die HP Image Zone-Software aufgerufen haben, können Sie im Dock auf die Menüverknüpfungen zugreifen, indem Sie im Dock die Maustaste über dem Symbol für HP Image Zone gedrückt halten.
2 Weitere Informationsquellen Für die Einrichtung und Verwendung des HP All-in-One können Sie auf die verschiedensten Informationsquellen (gedruckt und online) zugreifen. Informationsquellen Einrichtungsanweisungen Weitere Informationsquellen In den Einrichtungsanweisungen finden Sie Anleitungen zum Einrichten des HP All-in-One und zum Installieren der Software. Führen Sie die Schritte in der in den Einrichtungsanweisungen angegebenen Reihenfolge aus.
Kapitel 2 (Fortsetzung) Windows ● Das Kapitel Schritt-für-Schritt-Anweisungen enthält Informationen zur Verwendung der HP Image Zone-Software mit HP Geräten. ● Die Funktionenübersicht bietet weitere Informationen zu den praktischen und kreativen Aufgaben, die mit der HP Image Zone-Software und HP Geräten ausgeführt werden können. ● Weitere Unterstützung sowie HP Softwareaktualisierungen finden Sie unter Fehlerbehebung und Support.
Hinweis Die Onlinehilfe enthält auch Abschnitte zur Fehlerbehebung, um Ihnen bei der Behebung von Problemen zu helfen, die mit dem HP All-in-One auftreten können. Der Zugriff auf die Onlinehilfe auf einem Windows-Computer und deren Verwendung weicht leicht von Zugriff und Verwendung auf einem Macintosh-Computer ab. Die folgenden Abschnitte enthalten Richtlinien zur Verwendung von beiden Hilfesystemen.
Kapitel 2 Registerkarten "Inhalt", "Index" und "Suchen" Über die Registerkarten Inhalt, Index und Suchen können Sie in der HP Image Zone Hilfe nach jedem beliebigen Thema suchen. Weitere Informationsquellen ● Inhalt Die Registerkarte Inhalt enthält die in der Hilfe verfügbaren Themen in aufgelisteter Form ähnlich dem Inhaltsverzeichnis in einem Buch. In dieser Registerkarte können Sie gut nach allen Informationen suchen, die zu einer bestimmten Funktion, z. B. das Drucken von Fotos, verfügbar sind.
● Wenn ein Indexeintrag angezeigt wird, der sich offensichtlich auf die von Ihnen gesuchten Informationen bezieht, doppelklicken Sie auf den Indexeintrag. – Wenn diesem Indexeintrag in der Hilfe nur ein Thema zugeordnet ist, wird dieses Thema rechts im Ansichtsbereich angezeigt. – Wenn dem Eintrag demgegenüber viele Themen zugeordnet sind, erscheint das Dialogfenster Gefundene Themen. Doppelklicken Sie auf ein in dem Dialogfenster aufgeführtes Thema, um es im Ansichtsbereich anzuzeigen.
Kapitel 2 ● Weitere Informationsquellen ● Dialogfenster Gefundene Themen. Doppelklicken Sie auf ein in dem Dialogfenster aufgeführtes Thema, um es im Ansichtsbereich anzuzeigen. Einige Themen enthalten detaillierte Anweisungen oder zusätzliche Informationen, die nicht sofort auf der Seite sichtbar sind. Suchen Sie nach Alle anzeigen oder Alle ausblenden oben rechts auf der Seite. Wenn "Alle anzeigen" sichtbar ist, bedeutet dies, dass weitere Informationen auf der Seite ausgeblendet sind.
Verwenden der Hilfe auf einem Macintosh-Computer In diesem Abschnitt wird erläutert, wie Sie auf einem Macintosh-Computer auf die Onlinehilfe zugreifen können. Sie erfahren, wie Sie durch das Hilfesystem navigieren bzw. es durchsuchen können, um die erforderlichen Informationen zu finden. So greifen Sie auf einem Macintosh-Computer auf die HP Image Zone Hilfe zu ➔ Wählen Sie im Menü Hilfe von HP Image Zone die HP Image Zone Hilfe.
Kapitel 2 dieser Registerkarte können Sie gut nach allen Informationen suchen, die zu einer bestimmten Funktion, z. B. das Drucken von Fotos, verfügbar sind. Ansichtsbereich Im Ansichtsbereich im rechten Fenster werden die Hilfethemen angezeigt, die Sie im mittleren Fenster auswählen. Die Hilfethemen enthalten beschreibenden Text, schrittweise Anweisungen und ggf. Abbildungen.
Nachdem Sie die Suchkriterien eingegeben haben, drücken Sie auf Ihrer Tastatur die EINGABETASTE, um alle Hilfethemen aufzuführen, die die von Ihnen angegebenen Wörter oder Wendungen enthalten. Die Ergebnisse werden in einer dreispaltigen Tabelle aufgeführt. Jede Zeile enthält den Titel des Themas, die Relevanz (entspricht der Relevanz der Ergebnisse für Ihre Suchkriterien) und die Position, an der das Thema in der Hilfe verfügbar ist.
Weitere Informationsquellen Kapitel 2 26 HP Photosmart 3200 All-in-One Series
3 Fertigstellen der Einrichtung Ihres HP All-in-One Nach Abschluss der Arbeitsschritte in den Einrichtungsanweisungen lesen Sie dieses Kapitel, um die Einrichtung des HP All-in-One korrekt abschließen zu können. Dieser Abschnitt enthält wichtige Informationen in Bezug auf die Einrichtung Ihres Geräts, einschließlich der Definition der Voreinstellungen. ● ● ● Ändern Sie die Voreinstellungen für das Gerät wie Sprache und Land/Region sowie das Datum und die Uhrzeit.
Kapitel 3 HP All-in-One fest. Sie können die Einstellung jedoch jederzeit auf folgende Weise ändern: 1. 2. 3. 4. 5. 6. Drücken Sie die Taste Einrichten. Drücken Sie 6 und anschließend 1. Dadurch wird das Menü Voreinstellungen und dann Sprache u. Land/Region einstellen ausgewählt. oder , um Eine Liste mit Sprachen wird angezeigt. Drücken Sie die Taste durch die Liste mit Sprachen zu blättern. Wenn die von Ihnen gewünschte Sprache hervorgehoben wird, drücken Sie OK.
vorderen USB-Anschluss einsetzen, können Bluetooth®-Geräte wie PDAs und Kamerahandys den HP All-in-One zum Drucken verwenden. Hinweis Im Folgenden wird der Bluetooth® Wireless Printer-Adapter der HP bt300 oder HP bt400 Series einfach als HP Bluetooth®-Adapter bezeichnet.
Kapitel 3 (Fortsetzung) Beschreibung Empfohlene Anzahl Unterstützte angeschlossener Softwarefunktionen Computer zur Leistungsoptimierun g Einrichtungsanweis ungen Andernfalls können die anderen Computer nicht auf dem HP All-in-One drucken. (Windows) oder Druckerfreigabe (Macintosh). Computern wird nur die Druckfunktion unterstützt. Anschließen über ein USB-Kabel Um den HP All-in-One mit einem USB-Kabel anzuschließen, führen Sie die in den gedruckten Einrichtungsanweisungen dargestellten Schritte aus.
Wenn für Speed der Wert Up to 12 Mb/sec angegeben ist, arbeitet der USBAnschluss mit Full Speed USB (1.1). Eine höhere Geschwindigkeit bedeutet High Speed USB (USB 2.0). So ändern Sie die Geschwindigkeit des hinteren Anschlusses in Full Speed (HP All-in-One) 1. Drücken Sie die Taste Einrichten. Daraufhin wird das Menü Einrichten auf dem Farbdisplay angezeigt. 2. Drücken Sie , um Extras auszuwählen. Drücken Sie dann OK. Das Menü Extras wird angezeigt. 3. Drücken Sie 5 und dann 2.
Kapitel 3 ● verfügbar. Schlagen Sie in der Dokumentation des Bluetooth®-Adapters nach, ob er den Microsoft-Stack unterstützt. Widcomm-Stack: Wenn Sie über einen HP Computer mit integriertem Bluetooth® verfügen, oder wenn ein HP Bluetooth®-Adapter installiert ist, verfügt Ihr Computer über den Widcomm-Stack. Wenn Sie über einen HP Computer verfügen und einen HP Bluetooth®-Adapter anschließen, wird dieser automatisch unter Verwendung des Widcomm-Stacks installiert.
2. 3. 4. 5. 6. Verbindung. Weitere Informationen hierzu finden Sie in den gedruckten Einrichtungsanweisungen. Wenn Sie jedoch keine USB-Verbindung benötigen, wählen Sie Direkt mit Computer im Fenster Verbindungstyp aus. Wählen Sie außerdem auf dem Bildschirm Gerät jetzt anschließen das Kontrollkästchen Wenn keine Verbindung zum Gerät hergestellt werden kann... unten auf dem Bildschirm aus. Schließen Sie einen HP Bluetooth®-Adapter an den vorderen USB-Anschluss des HP All-in-One an.
Kapitel 3 Hilfe der Windows-Druckerfreigabe als Drucker verwenden. Auf dem direkt mit dem HP All-in-One verbundenen Computer, der als Host für den Drucker dient, werden alle Funktionen unterstützt. Anderen Computern, die in diesem Netzwerk als Clients dienen, stehen nur die Druckfunktionen zur Verfügung. Alle anderen Funktionen müssen auf dem Hostcomputer ausgeführt werden.
4 Verbinden mit einem Netzwerk In diesem Kapitel wird beschrieben, wie Sie den HP All-in-One mit einem Netzwerk verbinden, die Netzwerkeinstellungen anzeigen und verwalten sowie Fehler mit den Netzwerkverbindungen beheben.
Kapitel 4 Um den HP All-in-One mit einem verkabelten Netzwerk zu verbinden, müssen Sie folgendermaßen vorgehen: ● ● ● Tragen Sie zunächst die erforderlichen Materialien zusammen (siehe Was Sie für ein verkabeltes Netzwerk benötigen). Verbinden Sie anschließend Ihren HP All-in-One mit dem Router, Switch oder Hub. Weitere Informationen finden Sie unter Verbinden des HP All-in-One mit einem Netzwerk. Installieren Sie schließlich die Software (siehe Installieren der Software für eine Netzwerkverbindung).
HP Instant Share zugreifen möchten. Weitere Informationen zu HP Instant Share finden Sie im Abschnitt Gemeinsames Nutzen von Bildern mit Familienangehörigen und Freunden. Verbinden des HP All-in-One mit einem Netzwerk Auf der Rückseite des HP All-in-One befindet sich ein Ethernet-Anschluss. Ziehen Sie den gelben Stecker an der Rückseite des HP All-in-One heraus. 2. Schließen Sie das Ethernet-Kabel an den Ethernet-Anschluss auf der Rückseite Ihres HP All-in-One an. 3.
Kapitel 4 HP All-in-One wie unter Einrichten in verkabelten Netzwerken beschrieben verbunden haben. Hinweis 1 Wenn Ihre Computerkonfiguration Verbindungen zu einer Reihe von Netzwerklaufwerken vorsieht, müssen Sie vor dem Installieren der Software sicherstellen, dass Ihr Computer zurzeit mit diesen Laufwerken verbunden ist.
a. b. 6. 7. 8. 9. Wechseln Sie zum Bedienfeld Ihres Geräts. Wählen Sie im Menü Netzwerk die Option Netzwerkeinst. anzeigen und danach die Option Übersicht über verkabelte Netzwerke aus. Wenn die Beschreibung des Druckers korrekt ist, wählen Sie Ja, diesen Drucker installieren aus. Starten Sie Ihren Computer neu, wenn Sie dazu aufgefordert werden, um die Installation zu beenden. Nach Installieren der Software ist Ihr HP All-in-One einsatzbereit.
Kapitel 4 Wechseln des HP All-in-One von einer USB-Verbindung zu einer Netzwerkverbindung Wenn Sie den HP All-in-One zunächst für eine USB-Verbindung installiert haben, können Sie zu einem späteren Zeitpunkt zu einer Ethernet-Netzwerkverbindung wechseln. Wenn Sie bereits wissen, wie eine Verbindung zu einem Netzwerk hergestellt wird, können Sie anhand der unten aufgeführten allgemeinen Anweisungen vorgehen.
2. 3. Drücken Sie , um Netzwerk auszuwählen. Drücken Sie dann OK. Das Menü Netzwerk wird angezeigt. Führen Sie einen der folgenden Schritte durch: – Zum Anzeigen der Einstellungen für das verkabelte Netzwerk drücken Sie 1 und dann 2. Daraufhin wird die Option Zusammenfassung anzeigen ausgewählt und eine Übersicht über die Einstellungen des verkabelten (Ethernet-) Netzwerks angezeigt. – Zum Drucken der Netzwerkkonfigurationsseite drücken Sie 1 und dann nochmals 1.
Kapitel 4 Ändern der IP-Einstellungen Die Standardeinstellung für die IP-Einstellungen lautet Automatisch. Hiermit werden die IP-Einstellungen automatisch gesetzt. Wenn Sie jedoch ein erfahrener Benutzer sind, können Sie die IP-Adresse, die Teilnetzmaske (Subnet Mask) und das StandardGateway auch manuell ändern. Drucken Sie eine Netzwerkkonfigurationsseite von Ihrem HP All-in-One aus, um die IP-Adresse und die Teilnetzmaske Ihres HP All-in-One zu bestimmen.
Zugreifen auf den integrierten Webserver Sie können auf den integrierten Webserver nur über einen Computer zugreifen, der mit einem HP All-in-One in einem Netzwerk verbunden ist. 1. 2. 3. 4. Drücken Sie die Taste Einrichten. Drücken Sie , um Netzwerk auszuwählen. Drücken Sie dann OK. Das Menü Netzwerk wird angezeigt. Drücken Sie 1 zweimal hintereinander. Daraufhin wird das Menü Netzwerkeinstellungen ausgewählt und eine Konfigurationsseite für den HP All-in-One, einschließlich IP-Adresse, gedruckt.
Kapitel 4 Netzwerkkonfigurationsseite – Definitionen In der Konfigurationsseite werden die Netzwerkeinstellungen für den HP All-in-One angezeigt. Dies sind Einstellungen zur allgemeinen Information sowie zu verkabelten (802.3, Ethernet-) und Bluetooth®-Verbindungen. Informationen zum Drucken einer Netzwerkkonfigurationsseite finden Sie unter Anzeigen und Drucken von Netzwerkeinstellungen.
(Fortsetzung) Parameter Beschreibung AdminKennwort Status des Administratorkennworts für den integrierten Webserver: ● ● mDNS Festgelegt: Es wurde ein Kennwort festgelegt. Sie müssen das Kennwort eingeben, um Änderungen an den Parametern des integrierten Webservers vorzunehmen. Unbestimmt: Es wurde kein Kennwort festgelegt. Es ist kein Kennwort erforderlich, um Änderungen an den Parametern des integrierten Webservers vorzunehmen.
Kapitel 4 (Fortsetzung) Parameter Beschreibung machen. Teilnetze werden durch eine Teilnetzmaske gekennzeichnet. Diese Maske bestimmt, welche Teile der IPAdresse des HP All-in-One das Netzwerk und das Teilnetz darstellen und welche das Gerät selbst identifizieren. Hinweis Es wird empfohlen, dass der HP All-in-One und die angeschlossenen Computer sich im selben Teilnetz befinden. Default Gateway (StandardGateway) Ein Knoten in einem Netzwerk, der als Eingang zu einem anderen Netzwerk dient.
(Fortsetzung) Parameter Beschreibung ● ● ● 100TX-Full: für verkabelte Netzwerke. 100TX-Half: für verkabelte Netzwerke. Kein: Netzwerk ist deaktiviert. Übertragene Pakete insgesamt Die Anzahl der über den HP All-in-One übertragenen fehlerlosen Pakete seit dem letzten Einschalten. Beim Ausschalten des HP All-in-One wird der Zähler zurückgesetzt. Beim Übertragen von Nachrichten über ein Paketvermittlungsnetzwerk werden die Daten in Pakete aufgeteilt.
Kapitel 4 Fehlerbehebung bei Netzwerkproblemen Dieser Abschnitt befasst sich mit Problemen, die bei der Netzwerkeinrichtung auftreten können, nachdem Sie die Netzwerkverbindung hergestellt, die CD eingelegt und die Softwareinstallation gestartet haben. Es ist ein Fehler bei den Systemanforderungen aufgetreten: Kein TCP/IP Ihre LAN-Karte (NIC) wurde nicht ordnungsgemäß installiert. Stellen Sie sicher, dass Ihre LAN-Karte ordnungsgemäß installiert wurde und TCP/ IP unterstützt.
(Fortsetzung) Während der Installation wird der Bildschirm "Drucker nicht gefunden" angezeigt Schalten Sie den HP All-in-One ein.
Netzwerkeinrichtung Kapitel 4 50 HP Photosmart 3200 All-in-One Series
Einlegen von Originalen und Papier Dieses Kapitel enthält Anleitungen zum Auflegen von Originalen auf das Vorlagenglas für Kopier- und Scanaufträge, zum Auswählen der optimalen Papiersorte für Ihren Auftrag, zum Einlegen von Papier in das Hauptfach und das Fotofach und zum Vermeiden von Papierstaus. Einlegen von Dokumenten, Fotos, Dias und Negativen Sie können viele verschiedene Papiersorten und Papierformate in den HP All-in-One einlegen, u. a.
Einlegen von Originalen und Papier Kapitel 5 2. Schließen Sie die Abdeckung. Einlegen eines Originals in den Dia- und Negativhalter Sie können mit dem HP All-in-One mit Hilfe des Dia- und Negativfilmhalters Dias und Negativfilme mit einer Stärke von 35 mm scannen. So legen Sie Negative mit einer Stärke von 35 mm ein 1. Heben Sie die Abdeckung an. Entfernen Sie den Dia- und Negativhalter und die Deckelauflage.
Einlegen von Originalen und Papier 4. Legen Sie den Halter auf das Vorlagenglas, und richten Sie die Unterkante des Halters an der Unterkante des Vorlagenglases aus. Richten Sie danach die rechte Rastnase an der oberen Hälfte des Halters an der rechten Kante des Vorlagenglases aus. Weitere Informationen zum Scannen von Dias und Negativfilmen finden Sie unter Scannen von Dias oder Negativfilmen.
Einlegen von Originalen und Papier Kapitel 5 So legen Sie Dias mit einer Stärke von 35 mm ein Hinweis Der HP All-in-One unterstützt nicht das Scannen von Negativfilmen, die wie Dias in Kunststoff oder Pappe gerahmt sind. 1. Heben Sie die Abdeckung an. Entfernen Sie den Dia- und Negativhalter und die Deckelauflage. Legen Sie die Auflage an einen sicheren Ort, an dem diese weder beschädigt noch verschmutzt werden kann. 2.
Einlegen von Originalen und Papier Weitere Informationen zum Scannen von Dias und Negativfilmen finden Sie unter Scannen von Dias oder Negativfilmen. Erneutes Anbringen des Dia- und Negativhalters und der Deckelauflage Nach Entfernen der Dias oder des Negativfilms bringen Sie den Halter und die Deckelauflage wieder an der Abdeckung an. So bringen Sie den Dia- und Negativhalter und die Deckelauflage wieder an 1.
Einlegen von Originalen und Papier Kapitel 5 Einlegen von übergroßen Originalen Sie können übergroße Originale kopieren oder scannen, indem Sie die Abdeckung komplett vom HP All-in-One entfernen. Der HP All-in-One kann auch ohne Abdeckung betrieben werden. Tipp Wenn Sie übergroße Originale kopieren, legen Sie die Abdeckung auf das Original. Dadurch wird die Qualität der Kopie verbessert und weniger Tinte verwendet. So entfernen Sie die Abdeckung 1.
Einlegen von Originalen und Papier 3. Drücken Sie die Scharnierriegel, bis sich die Abdeckung vom Rest des HP All-in-One löst. 4. Bringen Sie nach dem Kopieren oder Scannen die Abdeckung wieder an. Führen Sie dazu die Rastnasen an den Scharnieren wieder in die entsprechenden Öffnungen ein. Schließen Sie danach das Netzkabel für die Dia- und Negativlampe wieder an. Schließen Sie das Kabel wieder an den Kabelklemmen auf der Rückseite des HP All-in-One an.
Einlegen von Originalen und Papier Kapitel 5 Ungeeignete Papiertypen Zu dünnes, glattes oder "dehnbares" Papier wird u. U. falsch eingezogen und verursacht Papierstau. Papier mit glatter Oberfläche kann Tinte schlecht aufsaugen, wodurch die Bilder beim Drucken möglicherweise verschmieren, verlaufen oder nicht ganz das Blatt ausfüllen. Je nach Ihrem Land/Ihrer Region sind einige dieser Papiersorten für Sie eventuell nicht verfügbar.
Die LED für das Fotofach leuchtet. Drücken Sie Start Farbe oder Start Schwarz. So wählen Sie Zufuhrfächer ohne Anpassung anderer Einstellungen aus 1. Drücken Sie im Bedienfeld die Taste Fotofach. Das Menü Funktion auswählen wird angezeigt. 2. Drücken Sie 1, um Kopieren, und 2, um Foto auszuwählen. Je nach gewählter Option wird die Menüoption Fachauswahl im Menü Kopieren oder Foto angezeigt. 3. Drücken Sie oder , um das zu verwendende Fach auszuwählen. Drücken Sie dann OK.
Einlegen von Originalen und Papier Kapitel 5 So legen Sie großformatiges Papier ein 1. Ziehen Sie das Hauptfach heraus, und schieben Sie die Papierquer- und -längsführung ganz nach außen. 2. 3. Richten Sie den Papierstapel auf einer ebenen Fläche aus, damit alle Seiten genau aufeinander liegen, und überprüfen Sie das Papier anschließend auf Folgendes: – Stellen Sie sicher, dass es keine Risse, Verschmutzungen, Knitterfalten oder umgeknickte oder gewellte Kanten aufweist.
Einlegen von Originalen und Papier 5. 6. Schieben Sie das Hauptfach wieder in den HP All-in-One. Ziehen Sie die Verlängerung des Ausgabefachs ganz heraus. Klappen Sie das Ende der Verlängerung des Ausgabefachs um, so dass die Verlängerung ihre volle Länge erreicht. Einlegen von 10 x 15 cm-Fotopapier (4 x 6 Zoll) Sie können Fotopapier im Format 10 x 15 cm, Hagaki-Karten, Postkarten und andere kleinformatige Medien bis zu einer Größe von 10 x 15 cm in das Fotofach des HP All-in-One einlegen.
Einlegen von Originalen und Papier Kapitel 5 2. 3. 4. 5. 6. 7. Legen Sie den Fotopapierstapel mit der schmalen Kante nach vorn und der zu bedruckenden Seite nach unten in das Fotofach ein. Schieben Sie den Fotopapierstapel bis zum Anschlag nach vorn. Wenn das verwendete Fotopapier Abreißstreifen aufweist, legen Sie es so in das Fach ein, dass die Abreißstreifen zu Ihnen weisen. Schieben Sie die Papierquer- und -längsführungen bis an den Stapel Fotopapier heran.
3. 4. Legen Sie den Stapel Karten mit der schmalen Kante nach vorn und der zu bedruckenden Seite nach unten ganz rechts in das Hauptfach ein. Schieben Sie den Stapel bis zum Anschlag nach vorn. Schieben Sie die Papierquer- und -längsführungen bis an die Karten heran. Legen Sie nicht zu viele Medien in das Hauptfach ein. Vergewissern Sie sich, dass der Kartenstapel in das Hauptfach passt und nicht höher als die obere Kante der Papierquerführung ist. 5.
Einlegen von Originalen und Papier Kapitel 5 3. Legen Sie einen oder mehrere Umschläge - mit den Umschlagklappen nach oben links - ganz rechts in das Zufuhrfach ein. Schieben Sie die Briefumschläge bis zum Anschlag nach vorn. Tipp Weitere Hilfe zum Einlegen von Briefumschlägen bietet die Abbildung auf dem Boden des Hauptfachs. 4. Schieben Sie die Papierquer- und -längsführungen bis an die Briefumschläge heran. Legen Sie nicht zu viele Medien in das Hauptfach ein.
Einlegen von Originalen und Papier (Fortsetzung) Papier Tipps HP Premium Inkjet-Transparentfolien Legen Sie die Folie mit dem weißen Transparentstreifen zuerst in das Hauptfach ein, so dass die Pfeile und das HP Logo oben liegen. Optimale Ergebnisse erzielen Sie, wenn Sie die Papiersorte vor dem Drucken oder Kopieren auf Transparentfolie einstellen.
Einlegen von Originalen und Papier Kapitel 5 (Fortsetzung) Papier Tipps durch den HP All-in-One geführt wird. Dadurch können Papierstaus entstehen. 1. Fächern Sie den Etikettenstapel auf, um sicherzustellen, dass die Seiten nicht aneinander kleben. 2. Legen Sie einen Stapel Etikettenblätter mit der Etikettenseite nach unten in das Hauptfach ein. Verwenden Sie dabei Normalpapier als Grundlage. Legen Sie die Etiketten nicht blattweise ein.
6 Verwenden der Foto- und Videofunktionen Der HP All-in-One kann auf Ihre Speicherkarten und Speichergeräte zugreifen, damit Sie Fotos oder Videos drucken, speichern, verwalten und weitergeben können. Sie können die Speicherkarte in den HP All-in-One einsetzen oder ein Speichergerät (z. B. ein USB-Keychain-Laufwerk) oder eine Digitalkamera am USB-Anschluss auf der Vorderseite anschließen, um den Inhalt vom HP All-in-One lesen zu lassen.
Kapitel 6 Fotos und Videos Die Steckplätze sind wie folgt konfiguriert: ● ● ● ● Oben links: CompactFlash (I, II) Oben rechts: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card Unten links: xD-Picture-Karte Unten rechts: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (mit Benutzeradapter), Memory Stick Pro So setzen Sie eine Speicherkarte ein 1. Drehen Sie die Speicherkarte so, dass das Etikett nach links zeigt und die Kontakte zum HP All-in-One zeigen. 2.
Hinweis Lesen Sie in der Dokumentation der Kamera nach, wie Sie den USB-Modus in PictBridge ändern können. Bei verschiedenen Kameras werden unterschiedliche Bezeichnungen für den PictBridge-Modus verwendet. Einige Kameras verfügen beispielsweise über die Einstellungen Digitalkamera und Diskettenlaufwerk. In diesem Beispiel entspricht die Einstellung Digitalkamera der Einstellung für den PictBridge-Modus.
Kapitel 6 Nach Anschließen des Speichergeräts können Sie folgende Arbeitsschritte für die Dateien ausführen, die auf dem Speichergerät gespeichert sind: ● ● ● ● ● Übertragen der Dateien zu Ihrem Computer Anzeigen von Fotos und Videos Bearbeiten von Fotos und Videos über das Bedienfeld Drucken von Fotos auf dem HP All-in-One Senden von Fotos und Videos an Freunde und Familienangehörige Fotos und Videos Vorsicht Entfernen Sie niemals ein Speichergerät, während auf dieses zugegriffen wird.
3. 4. 5. Drücken Sie 7, um die Diashow zu starten. Drücken Sie Abbrechen, um die Diashow zu beenden. Drücken Sie erneut Foto, um zur Fotoanzeige zurückzukehren. Anzeigen eines Videos Sie können sich auf dem HP All-in-One eine Videodatei anzeigen lassen. Mit Hilfe der Tasten im Bedienfeld können Sie ein Video abspielen, in den Einzelbildern eines Videos vorblättern, einen Rücklauf durchführen und die Videowiedergabe stoppen.
Kapitel 6 Anzeigen von Fotos mit Ihrem Computer Darüber hinaus besteht die Möglichkeit, Fotos mit Hilfe der HP Image Zone-Software, die mit Ihrem HP All-in-One geliefert wurde, anzuzeigen und zu bearbeiten. Weitere Informationen hierzu finden Sie online in der HP Image Zone Hilfe. Auswählen von Fotos und Videos Mit Hilfe des Bedienfelds am HP All-in-One können Sie Fotos und Videos auswählen.
Hinweis Jedes Foto auf der Speicherkarte oder dem Speichergerät besitzt eine Nummer, die vom HP All-in-One zugewiesen wurde. Diese Fotonummer befindet sich in der rechten unteren Ecke des Fotos, wenn das Foto zurzeit auf dem Farbdisplay angezeigt wird. Die Nummer links vom Schrägstrich (/) ist die Fotonummer. Die Nummer rechts vom Schrägstrich steht für die Gesamtanzahl der Fotos, die auf der Speicherkarte oder auf dem Speichergerät gespeichert sind. 4. Drücken Sie erneut OK.
Kapitel 6 Fotos und Videos So wählen Sie ein Einzelbild aus einem Video aus 1. Setzen Sie die Speicherkarte in den entsprechenden Steckplatz am HP All-in-One ein, oder schließen Sie ein Speichergerät am vorderen USBAnschluss an. 2. Drücken Sie oder , um zur auszuwählenden Videodatei zu blättern. 3. Drücken Sie 2. Die Videowiedergabe beginnt. 4. Drücken Sie erneut 2, um die Videowiedergabe zu stoppen, sobald sich das Video der Stelle mit dem auszudruckenden Einzelbild nähert. 5.
Mit Hilfe der HP Image Zone-Software können Sie Bilder anzeigen und bearbeiten. Darüber hinaus können Sie Bilder drucken, per E-Mail an Freunde und Verwandte senden, auf eine Website laden oder in privaten und kreativen Druckprojekten verwenden. Dies sind nur einige Möglichkeiten der HP Image Zone-Software. Machen Sie sich mit den Funktionen der Software vertraut, damit Sie die Funktionen Ihres HP All-in-One voll ausschöpfen können.
Kapitel 6 2. 3. 4. 5. 6. Fotos und Videos 7. Drücken Sie oder , bis das zu druckende Foto oder Video auf dem Farbdisplay angezeigt wird. Drücken Sie dann OK. Wiederholen Sie diesen Schritt, bis alle Fotos, die Sie drucken möchten, ausgewählt sind. Drücken Sie Foto, um das Menü Foto anzuzeigen. Drücken Sie 1, um die Option Druckassistent auszuwählen. Das Menü Layout wird angezeigt. Drücken Sie die Ziffer der Layout-Option, die Sie auswählen möchten: Das Menü Fachauswahl wird angezeigt.
So drucken Sie ein zugeschnittenes Foto 1. Zeigen Sie ein Foto im Farbdisplay an. Weitere Informationen finden Sie unter Anzeigen eines Fotos. 2. Drücken Sie die Zoom-Tasten (4 oder 5), um das Foto in unterschiedliche Größen zu vergrößern oder zu verkleinern: 3. 4. Drucken von Fotos mit Hilfe eines Photo-Indices Ein Photo-Index ist eine einfache und bequeme Möglichkeit zum Drucken von Fotos direkt von einer Speicherkarte oder einem Speichergerät, ohne dass ein Computer benötigt wird.
Kapitel 6 Hinweis Die für den Indexdruck benötigte Zeit hängt davon ab, wie viele Fotos sich auf der Speicherkarte befinden. 3. Wenn die Karte mehr als 20 Fotos enthält, wird das Menü Fotos auswählen angezeigt. Drücken Sie die Ziffer des Befehls, den Sie auswählen möchten: – 1. Alle – 2. Die letzten 20 – 3. Benutzerdef. Fotober. Fotos und Videos Hinweis Mit Hilfe der Fotonummern können Sie die zu druckenden Fotos auswählen.
Hinweis Wenn Sie weitere Einstellungen für das Drucken vornehmen möchten, können Sie die Fotos direkt vom Bedienfeld aus drucken. Weitere Informationen hierzu finden Sie unter Drucken von Fotos und Videos mit Hilfe des Bedienfelds. 3. Scannen Sie den Photo-Index. Weitere Informationen hierzu finden Sie unter Scannen eines Photo-Indices. Scannen eines Photo-Indices Im letzten Schritt wird der Photo-Index, den Sie auf das Vorlagenglas gelegt haben, gescannt. 1. 3.
Kapitel 6 entsprechenden Steckplatz am HP All-in-One einsetzen. Außerdem besteht die Möglichkeit, die Kamera auf den Speichermodus einzustellen und diese an den vorderen USB-Anschluss anzuschließen, um die Fotos auf Ihrem Computer zu speichern. Weitere Informationen zum Anschließen einer Digitalkamera, die sich im Speichermodus befindet, finden Sie unter Anschließen eines Speichergeräts. Weitere Informationen zum Einsetzen einer Speicherkarte finden Sie unter Einsetzen einer Speicherkarte.
Drücken Sie oder , um vorwärts oder rückwärts durch die einzelnen Fotos zu blättern. Halten Sie die Tasten oder gedrückt, um schneller durch die Fotos zu blättern. Gemeinsames Nutzen von Fotos mit Freunden und Familie Mit dem Onlinedienst von HP Instant Share können Sie Fotos problemlos mit Freunden und Verwandten gemeinsam nutzen.
Fotos und Videos Kapitel 6 82 HP Photosmart 3200 All-in-One Series
7 Gemeinsames Nutzen von Bildern mit Familienangehörigen und Freunden Mit dem Onlinedienst von HP Instant Share können Sie Ihre Bilder problemlos mit Freunden und Familienangehörigen gemeinsam nutzen. HP Instant Share dient zum Senden von Bildern an Ihre Familienangehörigen und Freunde oder zum Empfangen von Bildern von anderen Personen zum Anzeigen und Drucken, wenn Ihr HP All-in-One mit einem Netzwerk verbunden und für HP Instant Share registriert ist.
Kapitel 7 Empfangen von Bildern von anderen Personen Wenn Ihr HP All-in-One über ein Netzwerk verbunden und für HP Instant Share registriert ist, können andere Benutzer von HP Instant Share Bilder direkt an Ihren HP All-in-One senden. Je nach den Berechtigungen, die Sie für das Empfangen von Bildern einrichten, werden die Bilder entweder auf dem Server gespeichert, damit Sie diese vor dem Druck prüfen können, oder Sie werden nach Empfang automatisch gedruckt.
Weiterleiten einer empfangenen Bildersammlung Sie können empfangene Bildersammlungen an ein anderes Weitergabeziel weiterleiten. Auf diese Weise können Sie die von Ihnen empfangenen Bilder mit Familienangehörigen oder Freunden gemeinsam nutzen, Bilder in ein Online-Album stellen oder die Bilder an ein Online-Fotolabor senden, um professionelle Abzüge zu bestellen. Hinweis Die Verfügbarkeit der beschriebenen Dienste ist je nach Land/ Region unterschiedlich.
Kapitel 7 Hinweis Stellen Sie sicher, dass Sie eine Breitbandverbindung oder eine andere schnelle Internet-Verbindung verwenden, wenn Sie den HP RemoteDruckertreiber von der HP Website herunterladen. HP empfiehlt, keine Wählverbindung zu verwenden. Über eine Breitbandverbindung nimmt das Herunterladen des HP Remote-Druckertreibers etwa drei bis fünf Minuten in Anspruch.
aber auch einstellen, dass sie an die Größe des im Hauptfach eingelegten Papierformats angepasst werden. Automatische Überprüfung Konfiguriert den HP All-in-One so, dass der HP Instant Share-Server in regelmäßigen Abständen prüft, ob Bilder empfangen wurden. Tipp Sie sollten diese Einstellung deaktivieren, wenn Sie z. B. in Urlaub gehen und nicht in der Lage sind, Papier in das Zufuhrfach nachzulegen.
Bilder gemeinsam nutzen Kapitel 7 88 HP Photosmart 3200 All-in-One Series
8 Verwenden der Kopierfunktionen Der HP All-in-One ermöglicht das Erstellen von qualitativ hochwertigen Farb- und Schwarzweißkopien auf unterschiedlichen Papierarten. Dieses Kapitel enthält Anleitungen zum Erstellen von Kopien, Anzeigen der Kopiervorschau, Auswählen eines Bereichs zum Zuschneiden und Ändern von anderen Kopiereinstellungen.
Kapitel 8 So ändern Sie die Kopiereinstellungen nur für den aktuellen Auftrag 1. Drücken Sie Kopieren, um das Menü Kopieren anzuzeigen. 2. Drücken Sie die Zifferntaste, die der Einstellung entspricht, die Sie ändern möchten. Wählen Sie eine der folgenden Einstellungen aus: – 1. Anzahl Kopien – 2. Kopiervorschau – 3. Verkleinern/Vergrößern – 4. Zuschneiden – 5. Fachauswahl – 6. Papierformat – 7. Papiersorte – 8. Kopierqualität – 9. Heller/Dunkler – 0. Optimierungen – *. Neue Stand.-Einst. 3.
oder Grafiken überlagert. Wenn Sie eine präzise Vorschau oder eine Vorschau des Kopierauftrags ohne vorherige Änderung von Einstellungen wünschen, wählen Sie wie in diesem Abschnitt beschrieben im Menü Kopieren die Option Kopiervorschau aus. Hinweis Sie müssen Ihre Kopiereinstellungen ausdrücklich verwenden, um eine präzise Vorschau sicherzustellen. Bei den automatischen Einstellungen wird das Format und die Sorte des geladenen Papiers nicht berücksichtigt, sondern es werden die Standardwerte verwendet.
Kapitel 8 Der HP All-in-One erstellt eine randlose Kopie des Originalfotos. Tipp Wenn die Kopie einen Rand aufweist, wählen Sie für das Papierformat die entsprechende Menüoption für den randlosen Druck aus, stellen Sie die Papiersorte auf Fotopapier ein, und wiederholen Sie die Operation. Weitere Informationen zum Ändern der Kopiereinstellungen finden Sie unter Ändern der Kopiereinstellungen. Zuschneiden eines Originals Bevor Sie ein Original kopieren, können Sie ggf.
9 Drucken von Ihrem Computer Drucken Der HP All-in-One kann mit jeder Softwareanwendung verwendet werden, die über eine Druckfunktion verfügt. Die Anweisungen beim Drucken von einem Windows-PC weichen leicht von denen beim Drucken von einem Macintosh ab. Folgen Sie den Anweisungen in diesem Kapitel, die für Ihr Betriebssystem gelten.
Kapitel 9 5. Drucken 6. 7. Die Optionen für Ihren Druckauftrag finden Sie auf den Registerkarten Papier/ Qualität, Fertigstellung, Effekte, Grundlagen und Farbe. Klicken Sie auf OK, um das Dialogfeld Eigenschaften zu schließen. Klicken Sie auf Drucken bzw. OK, um den Druckauftrag zu starten. So drucken Sie aus einer Softwareanwendung (Macintosh) 1. Vergewissern Sie sich, dass sich im Zufuhrfach Papier befindet. 2. Wählen Sie den HP All-in-One vor dem Drucken im Print Center (Version 10.2) bzw.
Macintosh-Benutzer Ändern Sie die Einstellungen für den Druckauftrag in den Dialogfeldern Seite einrichten und Drucken. In welchem Dialogfeld Sie die Änderungen vornehmen, hängt davon ab, welche Einstellungen Sie ändern möchten. So ändern Sie das Papierformat, die Ausrichtung oder den Skalierungsprozentsatz 1. Wählen Sie im Softwareprogramm aus dem Menü Ablage die Option Seite einrichten aus. 2. Vergewissern Sie sich, dass der HP All-in-One ausgewählt ist. 3.
Kapitel 9 Drucken So halten Sie einen Druckauftrag vom HP All-in-One aus an ➔ Drücken Sie am Bedienfeld die Taste Abbrechen. Prüfen Sie, ob die Meldung Drucken abgebrochen auf dem Farbdisplay angezeigt wird. Wenn sie nicht angezeigt wird, drücken Sie erneut Abbrechen. So halten Sie einen Druckauftrag vom Computer aus an (unter Windows XP) 1. Klicken Sie in der Windows-Taskleiste auf Start und dann auf Systemsteuerung. 2. Öffnen Sie dann das Fenster Drucker und Faxgeräte. 3.
10 Verwenden der Scanfunktionen Dieses Kapitel enthält Informationen zum Scannen an eine Anwendung auf Ihrem Computer, an ein HP Instant Share-Ziel und an eine Speicherkarte oder ein Speichergerät. Es enthält ebenfalls Informationen zum Scannen von Dias und Negativfilmen über das Bedienfeld. Als Scannen wird der Vorgang bezeichnet, bei dem Texte und Bilder für den Computer in ein elektronisches Format konvertiert werden.
Kapitel 10 2. 3. Drücken Sie Scannen, wenn die Taste nicht bereits leuchtet. – Wenn Ihr HP All-in-One über ein USB-Kabel direkt mit einem Computer verbunden ist, wird das Menü Scannen an auf dem Farbdisplay angezeigt. Fahren Sie mit Schritt 4 fort. – Wenn Ihr HP All-in-One über ein Netzwerk verbunden ist, wird das Menü Scannen auf dem Farbdisplay angezeigt. Fahren Sie in diesem Fall mit dem nächsten Schritt fort.
Hinweis Wenn Ihr HP All-in-One mit einem Netzwerk verbunden ist, können Sie ein Scandokument nur an eine Speicherkarte oder ein Speichergerät senden, die/das im Netzwerk gemeinsam benutzt wird. Weitere Informationen hierzu finden Sie online in der HP Image Zone Hilfe. 1. 2. 3. Scannen von Dias oder Negativfilmen Sie können Dias und Negativfilme über das Bedienfeld mit Hilfe des Dia- und Negativfilmhalters scannen.
Kapitel 10 Menü Foto anzuzeigen, in dem Sie vor dem Drucken Ihre Druckoptionen ändern können. Weitere Informationen zur Verwendung des Druckassistent finden Sie unter Verwenden des Druckassistenten. Abbrechen eines Scanauftrags ➔ Um einen Scanvorgang abzubrechen, drücken Sie am Bedienfeld die Taste Abbrechen.
Bearbeiten eines gescannten Bilds Mit Hilfe der HP Image Zone-Software können Sie ein gescanntes Bild bearbeiten. Sie können ein gescanntes Dokument auch mit Hilfe der OCR-Software (Optical Character Recognition) bearbeiten. Bearbeiten eines gescannten Fotos oder einer gescannten Grafik Mit Hilfe der HP Image Zone-Software können Sie ein gescanntes Bild oder eine gescannte Grafik bearbeiten. Mit Hilfe dieser Software lassen sich u. a. die Helligkeit, der Kontrast und die Farbsättigung anpassen.
Scannen Kapitel 10 102 HP Photosmart 3200 All-in-One Series
11 Bestellen von Zubehör Sie können HP Produkte, wie empfohlene Papiersorten, Tintenpatronen und Zubehör, online auf der HP Website bestellen. Bestellen von Papier, Transparentfolien und anderer Druckmedien Um Druckmedien wie das HP Premium Papier, HP Premium Plus Fotopapier und HP Premium Inkjet-Transparentfolien zu bestellen, rufen Sie www.hp.com/learn/ suresupply auf. Wählen Sie bei entsprechender Aufforderung Ihr Land bzw.
Kapitel 11 wählen Sie anschließend Druckerwartung aus. Wählen Sie bei entsprechender Aufforderung den HP All-in-One aus, und klicken Sie anschließend auf Dienstprogramme. Wählen Sie im Popupmenü die Option Zubehör aus. Sie können sich darüber hinaus an einen HP Händler vor Ort wenden oder unter www.hp.com/support die richtigen Bestellnummern für Ihr Land/Ihre Region ermitteln. Sie können Tintenpatronen für den HP All-in-One unter www.hp.com/learn/suresupply bestellen.
(Fortsetzung) Land/Region Rufnummer für Bestellungen Europa +49 180 5 290220 (Deutschland) +44 870 606 9081 (Großbritannien) Neuseeland 0800 441 147 Südafrika +27 (0)11 8061030 USA und Kanada 1-800-HP-INVENT (1-800-474-6836) Bestellen von Zubehör Benutzerhandbuch 105
Bestellen von Zubehör Kapitel 11 106 HP Photosmart 3200 All-in-One Series
12 Warten des HP All-in-One Der HP All-in-One erfordert nur wenig Wartung. Bisweilen müssen Sie das Vorlagenglas und die untere Verkleidung der Abdeckung reinigen, um sicherzustellen, dass Ihre Kopien und gescannten Vorlagen sauber erstellt werden. Darüber hinaus müssen Sie hin und wieder die Tintenpatronen austauschen, den Drucker ausrichten und den Druckkopf reinigen. Dieses Kapitel enthält Anweisungen dazu, wie Sie Ihren HP All-in-One in bestem Betriebszustand halten.
Kapitel 12 4. Trocknen Sie die Abdeckungsunterseite mit einem Ledertuch oder einem anderen weichen Tuch. Vorsicht Verwenden Sie keine Papiertücher, da die Decklauflage durch sie verkratzt werden könnte. 5. Wenn eine weitere Reinigung erforderlich ist, wiederholen Sie die vorangehenden Schritte unter Verwendung von Reinigungsalkohol, und entfernen Sie die Alkoholreste, indem Sie die Abdeckungsunterseite gründlich mit einem feuchten Tuch abwischen.
Hinweis HP übernimmt keine Gewährleistung für die Qualität oder Zuverlässigkeit der Tinte anderer Hersteller. Erforderliche Druckerwartungen und -reparaturen, die sich aus Druckerausfällen oder -schäden aufgrund der Verwendung von Tinte anderer Hersteller ergeben, sind nicht durch die HP Gewährleistung abgedeckt. Wenn in einem der Symbole ein fast leerer Tintentropfen angezeigt wird, bedeutet dies, dass die betreffende Tintenpatrone nur noch über sehr wenig Tinte verfügt und bald ausgetauscht werden muss.
Kapitel 12 2. 3. Drücken Sie die Taste Einrichten. Drücken Sie 1 und dann erneut 1. Dadurch wird das Menü Bericht drucken angezeigt und die Option Selbsttestbericht ausgewählt. Der HP All-in-One druckt einen Selbsttestbericht, der folgende Informationen enthält: – Produktinformationen: Umfassen Modellnummer, Seriennummer und weitere Informationen. – Versionsinformationen: Umfassen die Versionsnummer der Firmware und die Angabe, ob ein HP Zubehör für beidseitiges Drucken installiert ist.
So tauschen Sie die Tintenpatronen aus 1. Öffnen Sie die Zugangsklappe zu den Tintenpatronen, indem Sie diese vorne am Gerät in der Mitte anheben, bis sie einrastet. 2. 1 Tintenpatronenriegel für die schwarze Tintenpatrone 2 Tintenpatronenriegel für die Farbtintenpatronen Ziehen Sie die Tintenpatrone in Ihre Richtung aus dem Steckplatz heraus. Benutzerhandbuch Warten des HP All-in-One 3.
Kapitel 12 Tipp Recyceln Sie die Tintenpatronen, die Sie herausnehmen, weil sie keine Tinte mehr enthalten. Das Recyclingprogramm für HP InkjetZubehör, das Ihnen das kostenlose Recyceln von leeren Tintenpatronen ermöglicht, ist in vielen Ländern/Regionen verfügbar. Weitere Informationen hierzu finden Sie auf folgender Website: Warten des HP All-in-One www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html 112 4. Nehmen Sie die neue Tintenpatrone aus ihrer Verpackung.
6. 7. Wiederholen Sie die Schritte 2 bis 5 für alle auszutauschenden Tintenpatronen. Schließen Sie die Zugangsklappe zu den Tintenpatronen. Ausrichten des Druckers Verwenden Sie diese Funktion, wenn die Farbblöcke im Selbsttestbericht Streifen oder weiße Linien aufweisen. Wenn nach Ausrichten des Druckers weiterhin Druckqualitätsprobleme auftreten, reinigen Sie den Druckkopf (siehe Reinigen des Druckkopfs).
Kapitel 12 So reinigen Sie den Druckkopf über das Bedienfeld 1. Legen Sie unbeschriebenes weißes Normalpapier im Format Letter oder A4 in das Hauptfach ein. 2. Drücken Sie die Taste Einrichten. 3. Drücken Sie 5 und dann 2. Daraufhin wird das Menü Extras und dann Druckköpfe reinigen ausgewählt. Der HP All-in-One druckt eine Seite aus, die Sie wieder verwenden oder entsorgen können.
4. 5. Überprüfen Sie die Kontakte der Tintenpatrone auf Tinten- und Schmutzansammlungen. Tauchen Sie ein Wattestäbchen oder ein sauberes Baumwolltuch in destilliertes Wasser, und wringen Sie das Tuch aus. Hinweis Halten Sie die Tintenpatrone an deren Griff fest. Berühren Sie NICHT die kupferfarbenen Kontakte. 6. Reinigen Sie nur die kupferfarbenen Kontakte. 1 7. 8. 9. Kupferfarbene Kontakte Setzen Sie die Tintenpatrone wieder in den leeren Steckplatz ein.
Warten des HP All-in-One Kapitel 12 116 HP Photosmart 3200 All-in-One Series
Informationen zur Fehlerbehebung In diesem Kapitel finden Sie Informationen zur Fehlerbehebung für den HP All-in-One. Außerdem finden Sie hier spezifische Informationen zur Installation und Konfiguration und einige Hinweise zum Betrieb Ihres Geräts. Weitere Informationen zur Fehlerbehebung finden Sie online in der HP Image Zone Hilfe, die Bestandteil Ihrer Software ist. Weitere Informationen hierzu finden Sie unter Verwenden der Onlinehilfe.
Kapitel 13 Fehlerbehebung Andere Informationsquellen ● Einrichtungsanweisungen: In den Einrichtungsanweisungen wird die Vorgehensweise zur Einrichtung des HP All-in-One erläutert. ● Benutzerhandbuch: Das Benutzerhandbuch ist das Buch, das Sie gerade lesen. In diesem Handbuch werden die grundlegenden Leistungsmerkmale Ihres HP All-in-One und die Verwendung Ihres HP All-in-One beschrieben. Darüber hinaus enthält das Handbuch Informationen zur Fehlerbehebung bei der Einrichtung und beim Betrieb des Geräts.
Netzanschluss 2 Geerdete Steckdose Fehlerbehebung 1 Das USB-Kabel ist angeschlossen, es treten jedoch Probleme bei der Verwendung des HP All-in-One mit dem Computer auf Lösung Sie müssen vor dem Anschließen des USB-Kabels die im Lieferumfang des HP All-in-One enthaltene Software installieren. Schließen Sie das USB-Kabel während der Installation nicht an, bis Sie dazu aufgefordert werden. Andernfalls können Fehler auftreten.
Fehlerbehebung Kapitel 13 Im Farbdisplay wird die falsche Sprache angezeigt Lösung Sie können die Einstellung jederzeit über das Menü Einrichten ändern. Weitere Informationen hierzu finden Sie unter Einstellen von Sprache und Land/Region. In den Menüs im Farbdisplay werden die falschen Maßeinheiten angezeigt Lösung Möglicherweise haben Sie im HP All-in-One das falsche Land/die falsche Region ausgewählt.
Fehlerbehebung Im Farbdisplay erscheint die Meldung, dass der Drucker ausgerichtet werden muss. Lösung Die Wartung des Druckers ist erforderlich, um eine hochwertige Druckqualität sicherzustellen. Weitere Informationen hierzu finden Sie unter Ausrichten des Druckers. Im Farbdisplay wird die Meldung angezeigt, dass die Ausrichtung des Druckers fehlgeschlagen ist. Mögliche Ursache In das Hauptfach wurde ein falscher Papiertyp eingelegt (z. B.
Fehlerbehebung Kapitel 13 ● ● ● ● ● ● ● ● 122 dem HP All-in-One verbunden und an die Stromversorgung angeschlossen ist. Drücken Sie die Taste Ein, um den HP All-in-One einzuschalten. Überprüfen Sie das USB-Kabel. Wenn Sie ein älteres Kabel benutzen, ist es möglich, dass dies nicht ordnungsgemäß funktioniert. Schließen Sie es an ein anderes Produkt an, um zu prüfen, ob das USB-Kabel intakt ist. Treten bei einem anderen Produkt ebenfalls Probleme auf, muss eventuell das USBKabel ausgetauscht werden.
● Weitere Informationen zum Einrichten und Verbinden Ihres HP All-in-One mit dem Computer finden Sie im Handbuch, das mit dem HP All-in-One geliefert wurde. Im Farbdisplay wird die Meldung angezeigt, dass ein Papierstau aufgetreten oder die Druckkopfeinheit blockiert ist. Lösung Wenn eine Fehlermeldung zu einem Papierstau oder einer blockierten Druckkopfeinheit auf dem Farbdisplay erscheint, befindet sich möglicherweise Verpackungsmaterial im Inneren des HP All-in-One.
Fehlerbehebung Kapitel 13 ● ● Weitere Informationen zum Starten von HP Solution Center finden Sie online in der HP Image Zone Hilfe, die Bestandteil Ihrer Software ist. Öffnen Sie das Dialogfeld "Drucker", und prüfen Sie, ob der HP All-in-One angezeigt wird. Überprüfen Sie, ob ganz rechts auf der Windows-Taskleiste das Symbol HP All-in-One angezeigt wird. Dies bedeutet, dass der HP All-in-One bereit ist.
Stellen Sie sicher, dass das USB-Kabel und die Netzkabel richtig angeschlossen sind. 3. Klicken Sie auf Wiederholen, um die Plug-and-Play-Einrichtung erneut durchzuführen. Wenn dies nicht hilft, fahren Sie mit dem nächsten Schritt fort. Überprüfen Sie die ordnungsgemäße Einrichtung des USB-Kabels wie folgt: – Trennen Sie das USB-Kabel, und stecken Sie es wieder ein. – Schließen Sie das USB-Kabel nicht an eine Tastatur oder einen Hub an, der nicht an die Stromversorgung angeschlossen ist.
Kapitel 13 Fehlerbehebung Weitere Informationen finden Sie unter Deinstallieren und Neuinstallieren der Software. Einige der Schaltflächen fehlen im HP Solution Center (Windows) Wenn die standardmäßigen Symbole (Bild scannen und Dokument scannen) nicht angezeigt werden, ist die Installation möglicherweise nicht vollständig. Lösung In diesem Fall müssen Sie die Software möglicherweise deinstallieren und dann erneut installieren.
Hinweis Es ist wichtig, dass Sie die Verbindung mit dem HP All-in-One trennen, bevor Sie den Computer neu starten. Schließen Sie den HP All-in-One erst wieder an den Computer an, wenn Sie die Software neu installiert haben. 7. Um die Software neu zu installieren, legen Sie die HP All-in-One-CD-ROM in das CD-ROM-Laufwerk des Computers ein. Befolgen Sie die Anweisungen auf dem Bildschirm und die Einrichtungsanweisungen, die mit dem HP All-in-One geliefert wurden. 8.
Kapitel 13 Fehlerbehebung 4. 5. Trennen Sie die Verbindung zwischen dem HP All-in-One und dem Computer. Starten Sie den Computer neu. Hinweis Es ist wichtig, dass Sie die Verbindung mit dem HP All-in-One trennen, bevor Sie den Computer neu starten. Schließen Sie den HP All-in-One erst wieder an den Computer an, wenn Sie die Software neu installiert haben. 6. 7. Legen Sie die HP All-in-One-CD-ROM in das CD-ROM-Laufwerk Ihres Computers ein, und starten Sie das Setup-Programm.
6. Fehlerbehebung beim Betrieb Der Abschnitt 3100, 3200, 3300 Series Fehlerbehebung in der HP Image Zone Hilfe-Software enthält Tipps zur Fehlerbehebung für einige der im Zusammenhang mit dem HP All-in-One am häufigsten auftretenden Probleme. Um von einem Windows-PC aus auf die Fehlerbehebungsinformationen zuzugreifen, öffnen Sie die HP Image Zone-Software, klicken auf Hilfe und wählen dann Fehlerbehebung und Support aus.
Kapitel 13 Fehlerbehebung Vorsicht Wenn das Papier reißt, während Sie versuchen, es zwischen den Walzen hervorzuziehen, untersuchen Sie Walzen und Rädchen gründlich auf zurückgebliebene Papierstückchen, die nicht im Gerät verbleiben sollten. Wenn Sie nicht alle Papierstückchen aus dem HP All-in-One entfernen, kommt es mit großer Wahrscheinlichkeit zu weiteren Papierstaus. 3. 4. Bringen Sie die hintere Klappe zum Beseitigen von Papierstaus wieder an.
● ● Sie kontaktieren den HP Customer Support, und ein Service-Techniker fordert Sie auf, die HP Support-Website aufzurufen, um eine Aktualisierung für Ihr Gerät herunterzuladen. Auf dem Farbdisplay Ihres HP All-in-One erscheint eine Mitteilung, in der Sie aufgefordert werden, Ihr Gerät zu aktualisieren.
Fehlerbehebung Kapitel 13 6. Die Anzeige des Farbdisplays wird grün, wenn mit der Aktualisierung Ihres Geräts begonnen wird. Trennen Sie das Gerät während der Aktualisierung nicht vom Netz, und führen Sie auch keine anderen Schritte aus. Hinweis Wenn Sie die Aktualisierung unterbrechen oder eine Fehlermeldung angezeigt wird, dass die Aktualisierung fehlgeschlagen ist, setzen Sie sich mit dem HP Support in Verbindung.
14 HP Gewährleistung und Support Hewlett-Packard bietet per Internet und Telefon Support für den HP All-in-One. Dieses Kapitel bietet Informationen zur Gewährleistung. Außerdem wird beschrieben, wie Sie über das Internet Support erhalten, sich an den HP Customer Support wenden, die Seriennummer und die Service-ID ausfindig machen und den HP All-in-One für den Versand vorbereiten.
Kapitel 14 Gewährleistungsinformationen HP Produkt Dauer der beschränkten Gewährleistung Software 90 Tage Druckpatronen Bis die HP Tinte verbraucht oder das auf der Druckpatrone angegebene Enddatum für die Garantie erreicht ist, je nachdem, welcher Fall zuerst eintritt. Diese Garantie gilt nicht für nachgefüllte, nachgearbeitete, recycelte, zweckentfremdete oder in anderer Weise manipulierte HP Tintenprodukte.
Vor dem Anruf beim HP Customer Support Möglicherweise werden mit Ihrem HP All-in-One Softwareprogramme anderer Hersteller geliefert. Falls Probleme mit diesen Programmen auftreten, erhalten Sie die beste technische Unterstützung, wenn Sie sich an den jeweiligen Hersteller wenden. Bevor Sie sich an den HP Customer Support wenden, müssen Sie die folgenden Schritte ausführen. Hinweis Diese Informationen gelten nicht für Kunden in Japan.
Kapitel 14 6. Die Seriennummer wird angezeigt. Notieren Sie die vollständige Seriennummer. Drücken Sie Abbrechen, bis das Menü Support geschlossen wird. Abrufen von Supportinformationen und weiteren Informationen aus dem Internet HP Gewährleistung und Support Wenn Sie Zugang zum Internet haben, können Sie über www.hp.com/support Hilfe anfordern. Wählen Sie bei Aufforderung Ihr Land/Ihre Region aus, und klicken Sie auf Kontakt zu HP, um Kontaktinformationen für den technischen Support zu erhalten.
www.hp.
Kapitel 14 HP Gewährleistung und Support HP Quick Exchange Service (Japan) Anweisungen zum Verpacken des Geräts für den Versand finden Sie unter Verpacken des HP All-in-One. Vorbereiten des HP All-in-One für den Versand Wenn Sie nach dem Gespräch mit dem HP Customer Support oder dem Aufsuchen der Verkaufsstelle aufgefordert werden, den HP All-in-One an den Kundendienst zu senden, verpacken Sie den HP All-in-One in der Originalverpackung, um weitere Beschädigungen zu vermeiden.
Hinweis 2 Diese Informationen gelten nicht für Kunden in Japan. Informationen zu Serviceoptionen in Japan finden Sie unter HP Quick Exchange Service (Japan). Anweisungen hierzu werden unter Verpacken des HP All-in-One beschrieben. Schalten Sie den HP All-in-One aus. Öffnen Sie die Zugangsklappe zu den Tintenpatronen, indem Sie diese vorne am Gerät in der Mitte anheben, bis sie einrastet. 3.
Kapitel 14 Vorsicht Senden Sie weder das Netzkabel noch die Bedienfeldschablonen mit Ihrem Gerät zurück. Das Austauschgerät wird ohne diese Komponenten geliefert. Bewahren Sie das Netzkabel an einem sicheren Platz auf, bis das HP All-in-OneAustauschgerät eintrifft. 8. Unter Entfernen der Bedienfeldschablone finden Sie weitere Hinweise zum ordnungsgemäßen Versenden des Geräts. Entfernen der Bedienfeldschablone Gehen Sie wie folgt vor, nachdem Sie die Tintenpatronen ersetzt haben.
HP Gewährleistung und Support 2. Behalten Sie die Bedienfeldschablone. Senden Sie die Bedienfeldschablone nicht zusammen mit dem HP All-in-One ein. Vorsicht Das HP All-in-One-Austauschgerät wird eventuell ohne Bedienfeldschablone geliefert. Bewahren Sie die Bedienfeldschablone (zusammen mit dem Netzkabel) an einem sicheren Ort auf, und bringen Sie diese nach Eintreffen des HP All-in-One-Austauschgeräts an diesem an.
Kapitel 14 3. Folgende Dokumente sollten dem Gerät beigefügt werden: – – HP Gewährleistung und Support – Eine vollständige Beschreibung der Fehler für das Kundendienstpersonal (Beispielseiten für die Druckqualität können sehr hilfreich sein). Eine Kopie des Kassenbelegs oder eines anderen Kaufbelegs, aus dem die Gewährleistungsfrist hervorgeht. Ihr Name sowie Ihre Adresse und die Telefonnummer, unter der Sie tagsüber zu erreichen sind.
15 Technische Daten In diesem Kapitel finden Sie Informationen zu den Systemanforderungen, Papierspezifikationen, Druckspezifikationen, Kopierspezifikationen, Spezifikationen für die Speicherkarte, Scanspezifikationen, Abmessungen und Gewicht, Stromversorgung, Umgebungsbedingungen, rechtlichen Hinweisen und zur Konformitätserklärung für den HP All-in-One. Systemanforderungen Systemanforderungen zur Software finden Sie in der Infodatei.
Kapitel 15 (Fortsetzung) Typ Format Gewicht 102 x 279 mm 102 x 305 mm 204 x 594 mm Briefumschläge U.S. Nr.
(Fortsetzung) Oben (oberer Rand) Unten (unterer Rand) Links Rechts ISO (A5, A6) und JIS (B5) 1,8 mm 6,0 mm 3,2 mm 3,2 mm Briefumschläge 1,8 mm 14,3 mm 3,2 mm 3,2 mm Karteikarten 7,62 x 12,7 cm, 12,7 x 20,32 cm 1,8 mm 6,0 mm 3,2 mm 3,2 mm Karteikarten 10 x 15 cm, 100 x 148 mm 1,8 mm 3 mm 3,2 mm 3,2 mm 10 x 15 cm-Fotopapier 3,2 mm 3,2 mm 3,2 mm 3,2 mm Druckspezifikationen ● ● ● ● ● ● ● ● Bis zu 1200 x 1200 dpi in Schwarz beim Drucken über einen Computer Bis zu 4800 x 1200 optimie
Kapitel 15 ● ● ● ● Digitales Zoomen zwischen 25 und 400 % (je nach Modell) An Seite anpassen, mehrere auf einer Seite Bis zu 32 Schwarzweißkopien/Minute; 31 Farbkopien/Minute (variiert von Modell zu Modell) Die Kopiergeschwindigkeit hängt von der Komplexität des Dokuments ab. Modus Maximale Auflösung Optimal Normal Schnell Geschwindigkeit (Seiten/Min) Scanauflösung (dpi) Maximum bei Skalierung auf 400 %.
Scanspezifikationen ● ● ● Integrierter Bildeditor Integrierte OCR-Software zur automatischen Konvertierung von gescanntem Text in editierbaren Text Integriertes Scannen von 35-mm-Filmen, bis zu 6 Negative oder 4 Dias Hinweis 35-mm-Filme (Positive) werden unterstützt. 35-mm-Filme (Negative) als gerahmte Dias werden nicht unterstützt. ● ● ● ● ● Die Scangeschwindigkeit hängt von der Komplexität des Dokuments ab. TWAIN-kompatible Schnittstelle Auflösung: Optische Auflösung 4800 x 4800 dpi, bis zu 19.
Kapitel 15 Umweltschutz Hewlett-Packard verfolgt eine Politik der umweltfreundlichen Herstellung qualitativ hochwertiger Produkte. Dieses Produkt wurde mit einer Reihe von Eigenschaften ausgestattet, die Umweltschäden im kleinstmöglichen Rahmen halten sollen. Weitere Informationen zu diesem Thema finden Sie auf der HP Website unter: www.hp.com/hpinfo/globalcitizenship/environment/index.html Ozonausstoß Dieses Produkt erzeugt keine nennenswerten Mengen von Ozon (O3).
Dieses HP Produkt enthält folgende Materialien, die am Ende des Nutzungszeitraums ggf. einer besonderen Entsorgung bedürfen: ● ● Quecksilber in den Neonlampen im Scanner (< 2 mg) und in der Dia- und Negativfilmlampe (< 2,5 mg) Blei im Lötmetall (Mit Wirkung zum 01.07.
Kapitel 15 operation. Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, might cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Declaration of Conformity (European Economic Area) The Declaration of Conformity in this document complies with ISO/IEC Guide 22 and EN 45014. It identifies the product, manufacturer’s name and address, and applicable specifications recognized in the European community.
Technische Daten Kapitel 15 152 HP Photosmart 3200 All-in-One Series
Index Symbole/Zahlen 10 x 15 cm Fotopapier Spezifikationen 143 10 x 15 cm-Fotopapier einlegen 61 4 x 6 Zoll Fotopapier einlegen 61 Spezifikationen 143 A A4-Papier Spezifikationen 143 Abbrechen Druckauftrag 95 kopieren 92 scannen 100 Symbolschaltfläche 8 Abmessungen und Gewicht 147 Admin-Kennwort 45 Allgemeine Informationen, Konfigurationsseite 44 Anhalten Druckauftrag 95 kopieren 92 scannen 100 Anschließen USB-Kabel 30, 119 anzeigen Diashow 70 Fotos und Videos 70 Aufheben der Auswahl Fotos 72 Videos 72 Aust
Druckoptionen 94 empfangene Bilder 84 Fotos von einer Speicherkarte 75 Optionen, Foto 79 Photo-Index 77 Scannen 100 Selbsttestbericht 109 Spezifikationen 145 vom Computer 93 von fernem Standort 85 Drucker ausrichten 113 Druckerfreigabe 33, 34 Drucker gefunden (Bildschirm), Windows 38 Druckkopf Einheit blockiert 123 reinigen 113 Druckrandspezifikationen 144 E Ein (Taste) 7 einlegen 4 x 6 Zoll Fotopapier 61 Dias 52 Dokumente 51 Etiketten 64 Fotos 51 Grußkarten 64 Hagaki-Karten 62 Negative 52 Postkarten 62 Tra
Index Speicherkarte einsetzen 67 Standardeinstellungen für Druck 79 weiterleiten 85 zuschneiden und drucken 76 Freigabe 39 Für Netzwerk einrichten 40 G Gateway, Standardeinstellung 46 Geräteadresse 47 Geräteaktualisierung Macintosh 132 Windows 131 Gerätename 47 Gewährleistung 133 Grußkarten einlegen 64 Spezifikationen 143 H Hagaki-Karten, einlegen 62 Hardware Fehlerbehebung bei der Einrichtung 118 Hardwareadresse 45 Hilfe andere Ressourcen 17 Menü 13 Taste 13 Verwenden der Onlinehilfe 18 Hostname 44 HP Inst
Scannen 79 PictBridge 68 Postkarten einlegen 62 Spezifikationen 143 R Randlose Fotos kopieren 91 von einer Speicherkarte drucken 75 Rechtliche Hinweise China 148 Declaration of Conformity (European Economic Area) 151 Declaration of Conformity (U.S.
Index Telefonnummern, Customer Support 135 Tintenfüllstände prüfen 108 Symbole 9 Tintenpatronen austauschen 110 bestellen 103 Fehler beheben 121, 130 Kontakte reinigen 114 Tintenfüllstände überprüfen 108 Transparentfolien einlegen 64 Spezifikationen 143 U Übergroße Bücher, einlegen 56 Uhrzeit 28 Umgebung Programm zur umweltfreundlichen Produktherstellung 147 Umgebungsbedingungen 147 URL 44 USB Anschlussgeschwindigkeit 30 Fehlerbehebung bei der Installation 119 V Verbinden Ethernet 35 verkabeltes Netzwerk 35
158 HP Photosmart 3200 All-in-One Series
© 2005 Hewlett-Packard Development Company, L.P. Electronic Edition www.hp.