HP Photosmart 5510 series
1 HP Photosmart 5510 series - Hilfe....................................................................................................................................3 2 Erste Schritte mit dem HP Photosmart Druckerkomponenten...........................................................................................................................................................5 Elemente des Bedienfelds......................................................................................................
Inhalt 2
HP Photosmart 5510 series - Hilfe Weitere Informationen zum HP Photosmart finden Sie unter: • • • • • • • • Erste Schritte mit dem HP Photosmart auf Seite 5 Vorgehensweise auf Seite 7 Drucken auf Seite 9 Kopieren und scannen auf Seite 15 Verwenden von Patronen auf Seite 19 Anschlussmöglich-keiten auf Seite 25 Technische Daten auf Seite 39 Lösen von Problemen auf Seite 31 HP Photosmart 5510 series - Hilfe 1 HP Photosmart 5510 series - Hilfe 3
Kapitel 1 HP Photosmart 5510 series - Hilfe 4 HP Photosmart 5510 series - Hilfe
2 Erste Schritte mit dem HP Photosmart • • Druckerkomponenten Elemente des Bedienfelds Druckerkomponenten Ansichten der Vorder- und Oberseite des HP Photosmart Erste Schritte mit dem HP Photosmart • • 1 Farbdisplay (auch als Anzeige oder Display bezeichnet) 2 Bedienfeld 3 Foto-LED 4 Speicherkartensteckplatz 5 Klappe des Speicherkartenfachs 6 Papierquerführung 7 Papierfach 8 Verlängerung des Papierfachs (auch als Fachverlängerung bezeichnet) 9 Netztaste 10 ePrint-Taste 11 Taste „W
Kapitel 2 20 Hinterer USB-Anschluss 21 Netzanschluss. Verwenden Sie den Drucker ausschließlich mit dem von HP gelieferten Netzkabel. Elemente des Bedienfelds Tippen Sie auf die Pfeiltasten, um zwischen den beiden Startanzeigen zu wechseln. Elemente des Bedienfelds Erste Schritte mit dem HP Photosmart 6 1 Start: Ruft wieder die Startanzeige auf, d. h. die Anzeige, die beim ersten Einschalten des Druckers angezeigt wird. 2 Hilfe: Zeigt auf der Startanzeige alle Hilfethemen an.
Vorgehensweise Dieser Abschnitt enthält Links zu häufig auszuführenden Aufgaben wie Verwalten von Apps, Scannen und Erstellen von Kopien.
Kapitel 3 Vorgehensweise 8 Vorgehensweise
4 Drucken Drucken der Fotos von einer Speicherkarte auf Seite 9 Drucken von beliebigem Standort auf Seite 11 Verwalten von Apps auf Seite 12 Verwandte Themen • Einlegen von Medien auf Seite 10 Tipps für erfolgreiches Drucken auf Seite 13 Drucken der Fotos von einer Speicherkarte 4. 5. 6. 7. 8. Tippen Sie in der Startanzeige auf Foto, um das Menü Foto anzuzeigen. Tippen Sie im Menü Foto auf Anzeigen & Drucken, um Fotos anzuzeigen. Tippen Sie auf ein Foto, das gedruckt werden soll.
Kapitel 4 Einlegen von Medien ▲ Führen Sie einen der folgenden Schritte durch: Einlegen von kleinformatigem Papier a. Ziehen Sie das Papierfach heraus, schieben Sie die Papierquerführungen nach außen, und nehmen Sie dann ggf. zuvor eingelegte andere Medien heraus. b. Legen Sie Papier ein. ❑ Legen Sie einen Stapel Fotopapier mit der schmalen Kante nach vorne und der zu bedruckenden Seite nach unten in das Papierfach ein. ❑ Schieben Sie das Fotopapier bis zum Anschlag nach vorne.
b. Legen Sie Papier ein. ❑ Legen Sie einen Papierstapel mit der schmalen Kante nach vorne und der zu bedruckenden Seite nach unten in das Papierfach ein. ❑ Schieben Sie das Papier bis zum Anschlag nach vorne. ❑ Schieben Sie die Papierquerführungen nach innen bis an die Papierkanten heran. Drucken von beliebigem Standort Der kostenlose ePrint-Dienst von HP bietet eine einfache Methode zum Drucken per E-Mail zu jedem Zeitpunkt und von jedem Standort aus.
Kapitel 4 Verwandte Themen • Ihr Drucker wird geschützt auf Seite 12 Erste Schritte mit ePrint auf Seite 12 Verwenden der HP ePrintCenter Website auf Seite 12 Ihr Drucker wird geschützt Zum Schutz gegen E-Mails durch Unbefugte wird Ihrem Drucker von HP eine E-Mail-Adresse nach dem Zufallsprinzip zugewiesen. Diese Adresse wird niemals veröffentlicht. ePrint stellt außerdem einen Spam-Filter gemäß Industriestandard zur Verfügung.
Tippen Sie in der Anzeige Apps auf Mehr, um eine Verbindung zum Internet herzustellen und weitere Apps hinzuzufügen. Zur Verwendung von Apps müssen die Webdienste aktiviert sein. So verwalten Sie Apps: 1. Hinzufügen von Apps a. Tippen Sie in der Startanzeige auf Apps und dann auf das Symbol Mehr. b. Tippen Sie auf das Symbol für eine hinzuzufügende App. c. Tippen Sie zur Bestätigung auf Hinzufügen. 2. Entfernen von Apps a. Tippen Sie in der Startanzeige auf Apps und dann auf das Symbol Mehr. b.
Kapitel 4 • • Vorgehensweise zum Drucken von einem beliebigen Standort aus, indem Sie eine E-Mail mit Anhang an den Drucker senden. Klicken Sie hier, um online auf weitere Informationen zuzugreifen. Wenn Autom.-Aus aktiviert ist, müssen Sie Autom.-Aus deaktivieren, um ePrint verwenden zu können. Weitere Informationen finden Sie unter Autom.-Aus auf Seite 46.
Kopieren und scannen • • • Kopieren und scannen 5 Kopieren von Dokumenten mit Text oder einer Kombination aus Text und Grafiken Scannen an den Computer oder auf eine Speicherkarte Tipps für erfolgreiches Kopieren und Scannen Kopieren von Dokumenten mit Text oder einer Kombination aus Text und Grafiken ▲ Führen Sie einen der folgenden Schritte durch: Erstellen einer Schwarzweißkopie a. Legen Sie Papier ein. ❑ Legen Sie großformatiges Papier in das Papierfach ein.
Kapitel 5 Kopieren und scannen ❑ Schließen Sie die Abdeckung. c. Legen Sie die Kopienanzahl und die Einstellungen fest. ❑ Tippen Sie in der Startanzeige auf Kopieren und dann auf Schwarz. ❑ Tippen Sie auf Einst., um das Papierformat, den Papiertyp, die Qualität und weitere Einstellungen festzulegen. ❑ Tippen Sie auf die Pfeiltasten, um die Kopienanzahl zu ändern. d. Starten Sie den Kopiervorgang. ❑ Berühren Sie die Option Start. Erstellen einer Farbkopie a. Legen Sie Papier ein.
Kopieren und scannen ❑ Schließen Sie die Abdeckung. c. Wählen Sie Kopieren aus. ❑ Tippen Sie in der Startanzeige auf Kopieren und dann auf Farbe. ❑ Tippen Sie auf Einst., um das Papierformat, den Papiertyp, die Qualität und weitere Einstellungen festzulegen. ❑ Tippen Sie auf die Pfeiltasten, um die Kopienanzahl zu ändern. d. Starten Sie den Kopiervorgang. ❑ Tippen Sie auf Start.
Kapitel 5 Kopieren und scannen c. Schließen Sie die Abdeckung. 2. Setzen Sie zum Scannen auf eine Speicherkarte eine Speicherkarte in den Speicherkartensteckplatz ein. Wenn an einen Computer gescannt werden soll, vergewissern Sie sich, dass der Drucker über ein WirelessNetzwerk oder ein USB-Kabel mit dem Computer verbunden ist. 3. Starten Sie den Scanvorgang. a. Tippen Sie in der Startanzeige auf Scannen. b. Wählen Sie das Ziel aus, indem Sie auf Computer oder Speicherkarte tippen.
Verwenden von Patronen • • • • • • • • Überprüfen der geschätzten Tintenfüllstände Automatisches Reinigen des Druckkopfs Entfernen verschmierter Tinte Auswechseln der Patronen Ausrichten des Druckers Bestellen von Tintenzubehör Gewährleistungsinformationen für Patronen Tipps zum Verwenden von Patronen Verwenden von Patronen 6 Überprüfen der geschätzten Tintenfüllstände Tippen Sie auf der Startanzeige auf den Pfeil nach rechts und dann auf das Symbol Tinte, um die geschätzten Tintenfüllstände anzuzeigen.
Kapitel 6 Dieses wird während der Reinigung automatisch durch den Drucker geführt. Es ist normal, dass während dieser Zeit mechanische Geräusche zu hören sind. So beseitigen Sie verschmierte Tinte über das Druckerdisplay: 1. Tippen Sie in der Startanzeige auf die Pfeiltaste nach rechts. Tippen Sie auf das Symbol Einrichtung und dann auf Extras. 2. Tippen Sie im Menü Extras auf den Pfeil nach unten, um in den Optionen zu blättern. Tippen Sie dann auf Verschm. entf..
Verwenden von Patronen b. Drehen Sie die orangefarbene Kappe, um diese zu entfernen. Sie müssen ggf. kräftig drehen, um die Kappe zu entfernen. c. Richten Sie die farbigen Symbole aneinander aus. Schieben Sie dann die Patrone bis zum Einrasten in die Halterung. d. Schließen Sie die Zugangsklappe zu den Patronen.
Kapitel 6 Verwenden von Patronen Verwandte Themen • Bestellen von Tintenzubehör auf Seite 22 Tipps zum Verwenden von Patronen auf Seite 23 Ausrichten des Druckers Nachdem neue Patronen eingesetzt wurden, richten Sie den Drucker aus, um eine optimale Druckqualität sicherzustellen. Sie können den Drucker entweder über das Druckerdisplay oder die Druckersoftware ausrichten. So richten Sie den Drucker über das Druckerdisplay aus: 1. Tippen Sie in der Startanzeige auf die Pfeiltaste nach rechts.
Tintenfüllstandswarnungen enthalten auch Angaben und Links zum Online-Bezug der Patronen. Informationen zu Patronen und die Möglichkeit zur Online-Bestellung finden Sie außerdem unter www.hp.com/buy/supplies. Hinweis Die Online-Bestellung von Patronen wird nicht in allen Ländern/Regionen unterstützt. Falls dies in Ihrem Land/Ihrer Region nicht möglich ist, erhalten Sie bei Ihrem HP Händler vor Ort Informationen zum Bestellen von Patronen.
Kapitel 6 Verwenden von Patronen 24 Verwenden von Patronen
7 Anschlussmöglich-keiten • • • • • • Hinzufügen des HP Photosmart zu einem Netzwerk Wechseln von einer USB-Verbindung zu einem Wireless-Netzwerk Verbinden eines neuen Druckers Ändern der Netzwerkeinstellungen Tipps zum Einrichten und Verwenden eines Netzwerkdruckers Tools für erweiterte Druckerverwaltung (für Netzwerkdrucker) Hinzufügen des HP Photosmart zu einem Netzwerk • • WiFi Protected Setup (WPS) auf Seite 25 Wireless mit einem Router (Infrastrukturnetzwerk) auf Seite 26 WiFi Protected Setup (WP
Kapitel 7 Hinweis Vom Produkt wird ein Timer gestartet, der ungefähr zwei Minuten läuft. In dieser Zeit muss die entsprechende Taste am Netzwerkgerät gedrückt werden. ❑ Tippen Sie auf OK. c. Installieren Sie die Software. Verwenden der PIN-Methode a. Wählen Sie die Einrichtungsmethode aus. Vergewissern Sie sich, das die PIN-Methode von Ihrem WPSfähigen Wireless-Router unterstützt wird. ❑ Tippen Sie in der Startanzeige auf die Pfeiltaste nach rechts und dann auf das Symbol Wireless.
Wechseln von einer USB-Verbindung zu einem WirelessNetzwerk Wenn der Drucker bei der anfänglichen Einrichtung und der Installation der Software über ein USB-Kabel direkt mit dem Computer verbunden war, können Sie problemlos zu einer Wireless-Netzwerkverbindung wechseln. Sie benötigen ein Wireless 802.11b/g/n Netzwerk mit einem Wireless-Router oder Zugriffspunkt (Access Point). Hinweis 802.11n unterstützt nur 2,4 GHz. So wechseln Sie von einer USB-Verbindung zu einem Wireless-Netzwerk: 1. Windows: a.
Kapitel 7 So führen Sie den Wireless-Einrichtungsassistenten aus, um die Netzwerkeinstellungen zu ändern: 1. Tippen Sie auf dem Druckerdisplay in der Startanzeige auf die Pfeiltaste nach rechts und dann auf das Symbol Wireless. 2. Tippen Sie im Menü „Wireless“ auf Wireless-Einrichtungsassistent. 3. Befolgen Sie die angezeigten Anweisungen, um die Netzwerkeinstellungen zu ändern.
Informationen zu Cookies Der eingebettete Webserver (EWS, Embedded Web Server) speichert sehr kleine Textdateien (Cookies) auf der Festplatte, wenn Sie damit arbeiten. Diese Datei dient dazu, Ihren Computer zu erkennen, wenn Sie den EWS das nächste Mal aufrufen. Wenn Sie beispielsweise die EWS-Sprache konfigurieren, wird diese Einstellung in einem Cookie abgelegt, sodass die Seiten beim nächsten Zugreifen auf den EWS in der betreffenden Sprache angezeigt werden.
Kapitel 7 Anschlussmöglich-keiten 30 Anschlussmöglich-keiten
8 Lösen von Problemen • • • • • • • Weitere Hilfe Registrieren Ihres Druckers Beseitigen eines Papierstaus Lösen von Druckproblemen Lösen von Problemen beim Kopieren und Scannen Lösen von Netzwerkproblemen Telefonischer Support durch HP Weitere Hilfe Weitere Informationen und Hilfe zu Ihrem HP Photosmart erhalten Sie, indem Sie ein Stichwort in das Feld Suchen links oben im Help Viewer eingeben. Es werden Titel für verwandte Themen -- sowohl lokale als auch Onlinethemen -- aufgelistet.
Kapitel 8 3. Entfernen Sie das eingeklemmte Papier. 4. Schließen Sie die Papierpfadabdeckung. Lösen von Problemen 5. Schließen Sie die Zugangsklappe zu den Patronen. 6. Starten Sie den Druckvorgang erneut. Besteht das Problem danach weiterhin, klicken Sie hier, um online auf weitere Informationen zur Fehlerbehebung zuzugreifen. Freigeben des Patronenwagens Entfernen Sie alle Objekte wie Papier, die den Patronenwagen blockieren.
Klicken Sie hier, um online auf weitere Informationen zuzugreifen. Lösen von Druckproblemen Vergewissern Sie sich, dass der Drucker eingeschaltet und Papier im Papierfach eingelegt ist. Ist weiterhin kein Druck möglich, stellt HP ein Dienstprogramm HP Print Diagnostic (nur Windows) zur Verfügung, mit denen sich viele allgemeine Ursachen für die Meldung “Drucken nicht möglich” beheben lassen. Klicken Sie im Menü Start auf dem Computer auf Alle Programme und dann auf HP.
Kapitel 8 Klicken Sie auf die Links weiter unten, um weitere Informationen zum Lösen von Netzwerkproblemen zu erhalten. • • • • Weitere Informationen zum Wireless-Druck. Klicken Sie hier, um online auf weitere Informationen zuzugreifen. Vorgehensweise zum Auffinden der Sicherheitseinstellungen für das Netzwerk. Klicken Sie hier, um online auf weitere Informationen zuzugreifen. Informationen zum Dienstprogramm HP Network Diagnostic (nur Windows) und weitere Tipps zur Fehlerbehebung.
Zubehör-Upgrade für Patronen Wenn das Zubehör-Upgrade nicht erfolgreich ist, versuchen Sie Maßnahmen zu ergreifen, damit der Drucker die Zubehör-Upgrade-Patrone erkennt. So bringen Sie den Drucker dazu, dass er die Zubehör-Upgrade-Patrone erkennt: 1. Nehmen Sie die Zubehör-Upgrade-Patrone heraus. 2. Setzen Sie die Originalpatrone in den Patronenwagen ein. 3. Schließen Sie die Zugangsklappe zu den Patronen, und warten Sie, bis der Druckwagen sich nicht mehr bewegt. 4.
Kapitel 8 Druckerfehler Wenn der Drucker bereits aus- und wieder eingeschaltet wurde und das Problem weiterhin besteht, nehmen Sie Kontakt zum HP Support auf. Klicken Sie hier, um online auf weitere Informationen zuzugreifen. Probleme mit den Tintenpatronen So lösen Sie Probleme mit den Tintenpatronen: 1. Nehmen Sie die Patronen heraus, und setzen Sie diese wieder ein. Vergewissern Sie sich, dass die Patronen sich in den richtigen Halterungen befinden. 2.
Bei den elektrischen Kontakten handelt es sich um vier Rechtecke aus kupfer- oder goldfarbenem Metall an der Unterseite der Tintenpatrone. 1 Tintenfenster 2 Elektrische Kontakte e. Wischen Sie die Kontakte ausschließlich mit einem trockenen Reinigungsstäbchen oder einem fusselfreien Tuch ab. Vorsicht Achten Sie darauf, dass Sie ausschließlich die Kontakte berühren. Verschmieren Sie keine Tinte oder anderen Abrieb auf andere Stellen der Patrone.
Kapitel 8 Warnung Sie müssen die orangefarbenen Kappen an den herkömmlichen Patronen anbringen, wenn Sie diese herausnehmen. Ansonsten trocknen die Patronen schnell aus. Ein wenig Tinte wird dennoch verdunsten, aber weniger als bei Patronen, die nicht mit den Kappen verschlossen sind. Sie können, falls erforderlich, die orangefarbenen Kappen von den SETUP-Patronen verwenden. Wenn die Fehlermeldung weiterhin angezeigt wird, nehmen Sie Kontakt zum HP Support auf.
9 Technische Daten Die technischen Daten und die internationalen Zulassungsinformationen für den HP Photosmart finden Sie in diesem Abschnitt. Weitere Spezifikationen und technische Daten finden Sie in der gedruckten Dokumentation des HP Photosmart.
Kapitel 9 So deaktivieren Sie die Funktion zum Sammeln der Nutzungsdaten: 1. Tippen Sie in der Startanzeige auf die Pfeiltaste nach rechts und dann auf das Symbol Einrichtung. 2. Tippen Sie auf Voreinstellungen. 3. Tippen Sie auf Infos zum Patronen-Chip und dann auf OK. Hinweis 1 Stellen Sie die werkseitigen Standardeinstellungen wieder her, um die Funktion zum Sammeln der Nutzungsdaten wieder zu aktivieren.
Druckauflösung Informationen zur Druckauflösung Ihres Druckers enthält die Druckersoftware. Programm zur umweltfreundlichen Produktherstellung Hewlett-Packard hat sich der umweltfreundlichen Herstellung qualitativ hochwertiger Produkte verpflichtet. Das Gerät ist so konzipiert, dass es recycelt werden kann. Die Anzahl der verwendeten Materialien wurde auf ein Minimum reduziert, ohne die Funktionalität und Zuverlässigkeit einzuschränken. Verbundstoffe wurden so entwickelt, dass sie einfach zu trennen sind.
Kapitel 9 Datenblätter zur Materialsicherheit Sicherheitsdatenblätter finden Sie auf der HP Webseite unter: www.hp.com/go/msds Recycling-Programm HP bietet in vielen Ländern/Regionen eine wachsende Anzahl von Rückgabe- und Recycling-Programmen an und kooperiert mit einigen der weltweit größten Recycling-Zentren für Elektronik. Durch den Wiederverkauf seiner gängigsten Produkte trägt HP zur Bewahrung natürlicher Ressourcen bei. Informationen zum Recycling von HP Produkten finden Sie auf der Website: www.
Technische Daten Disposal of waste equipment by users in private households in the European Union Programm zur umweltfreundlichen Produktherstellung 43
Kapitel 9 Chemische Substanzen HP hat sich verpflichtet, seine Kunden über die Verwendung chemischer Substanzen in HP Produkten in dem Umfang zu informieren, wie es rechtliche Bestimmungen wie REACH (Verordnung EG Nr. 1907/2006 des Europäischen Parlaments und des Rates) vorsehen. Informationen zu den in diesem Produkt verwendeten Chemikalien finden Sie unter: www.hp.com/go/reach.
Technische Daten EU battery directive Einstellen des Energiesparmodus Wenn Sie den HP Photosmart ausschalten, wechselt er standardmäßig zum Energiesparmodus. Dadurch erhöht sich zwar die Energieeffizienz des Produkts, aber es kann länger als erwartet dauern, bis das Produkt wieder eingeschaltet wird. Außerdem kann der HP Photosmart im Energiesparmodus manche automatisierte Wartungsmaßnahmen nicht durchführen.
Kapitel 9 So stellen Sie die Zeit für den Energiesparmodus ein oder schalten den Energiesparmodus aus: 1. Tippen Sie in der Startanzeige auf die Pfeiltaste nach rechts und dann auf das Symbol Einrichtung. 2. Tippen Sie auf Voreinstellungen. 3. Tippen Sie auf den Pfeil nach unten, um durch die Optionen zu blättern, und tippen Sie dann auf Energiesparmodus. 4. Tippen Sie auf Nach 5 Min. oder Aus. Autom.-Aus „Autom.-Aus“ wird standardmäßig automatisch aktiviert, wenn Sie den Drucker einschalten.
FCC statement VCCI (Class B) compliance statement for users in Japan Technische Daten Notice to users in Japan about the power cord Notice to users in Korea Zulassungsinformationen 47
Kapitel 9 Europäische Union – Rechtlicher Hinweis Produkte mit CE-Kennzeichnung erfüllen die folgenden EU-Richtlinien: • • • Niederspannungsrichtlinie 2006/95/EG Richtlinie 2004/108/EG über die elektromagnetische Verträglichkeit Ökodesign-Richtlinie 2009/125/EG, sofern anwendbar Die CE-Konformität dieses Produkts ist dann gegeben, wenn das Produkt mit dem richtigen, das CE-Zeichen tragenden Netzteil von HP betrieben wird.
Hewlett-Packard GmbH, Abt.
Kapitel 9 Notice to users in Taiwan Technische Daten 50 Technische Daten
Index B Zulassungsmodell-nummer 46 Index Bedienfeld Elemente 6 Tasten 6 D Dauer des telefonischen Supports Dauer des Supports 34 Drucken Spezifikationen 40 G Gewährleistung 34 K Kopie Spezifikationen 40 N Nach Ablauf des Support-Zeitraums Netzwerk Netzwerkkarte 25, 26 Netzwerkkarte 25, 26 34 R Rechtliche Hinweise Wireless-Produkte 49 Recycling Druckpatronen 42 S Scannen Scanspezifikationen 40 Support Gewährleistung 34 Systemanforderungen 40 T Tasten, Bedienfeld 6 Technische Daten Druckspezifikati
Index 52