HP Photosmart C4100 All-in-One series Kurz anleitung
HP Photosmart C4100 All-in-One Series Kurzanleitung
© 2006 Hewlett-Packard Development Company, L.P. Adobe® und das Acrobat-Logo® sind Marken von Adobe Systems Incorporated. Windows®, Windows NT®, Windows Me®, Windows XP® und Windows 2000® sind in den USA eingetragene Marken der Microsoft Corporation. Intel® und Pentium® sind in den USA und anderen Ländern/Regionen Marken oder eingetragene Marken der Intel Corporation oder ihrer Tochtergesellschaften.
Inhalt 1 2 3 Kurzanleitung Übersicht über den HP All-in-One........................................................................2 Der HP All-in-One auf einen Blick...........................................................................3 Elemente des Bedienfelds.......................................................................................5 Verwenden der Software HP Photosmart...............................................................6 Weitere Informationen..............................
Übersicht über den HP All-in-One 1 Übersicht über den HP All-in-One Mit dem HP All-in-One können Sie schnell und einfach verschiedene Aufgaben durchführen, wie z. B. eine Kopie erstellen, Dokumente scannen oder die Fotos auf einer Speicherkarte drucken. Auf viele Funktionen des HP All-in-One können Sie direkt am Bedienfeld zugreifen, ohne den Computer einzuschalten.
Übersicht über den HP All-in-One Der HP All-in-One auf einen Blick Nummer Beschreibung 1 Bedienfeldanzeige (auch Anzeige genannt) 2 Bedienfeld 3 Fotopapierkassette 4 Speicherkartensteckplätze 5 Zufuhrfach 6 Papierfachverlängerung (auch Fachverlängerung genannt) 7 Papierquerführung 8 Druckpatronenklappe Kurzanleitung 3
Übersicht über den HP All-in-One Kapitel 1 (Fortsetzung) * 4 Nummer Beschreibung 9 Vorlagenglas 10 Abdeckungsunterseite Nummer Beschreibung 1 Hintere Zugangsklappe 2 Hinterer USB-Anschluss 3 Netzanschluss* Betreiben Sie das Gerät nur mit dem von HP gelieferten Netzteil.
Übersicht über den HP All-in-One Elemente des Bedienfelds Die folgende Abbildung und die dazugehörige Tabelle bieten eine Übersicht über das Bedienfeld des HP All-in-One. Nummer Name und Beschreibung 1 Farbdisplay (auch als Anzeige bezeichnet): Hier werden Menüs, Fotos und Meldungen angezeigt. Um die Anzeige auf dem Bedienfeld besser lesen zu können, heben Sie das Bedienfeld an, und bringen Sie es in eine schräge Position. 2 Navigationsfeld: Navigieren durch die Menüoptionen.
Übersicht über den HP All-in-One Kapitel 1 (Fortsetzung) Nummer Name und Beschreibung 4 Achtung-LED: Weist auf ein aufgetretenes Problem hin. Überprüfen Sie die Anzeige auf weitere Informationen. 5 Taste Zurück: Zurückkehren zum vorherigen Bildschirm. 6 Einrichten: Zugreifen auf die Menüs für Berichte und Wartung. 7 Vorschau: Anzeigen einer Vorschau eines Scan-, Kopier- oder Fotoauftrags. 8 Foto nachbearbeiten: Anpassen von Fotos zum Anzeigen oder Drucken.
Informationen zur Verwendung der Software HP Photosmart finden Sie in der HP Photosmart-Hilfe. Weitere Informationen Es gibt eine Vielzahl von Informationsquellen mit Anleitungen zum Einrichten und Verwenden des HP All-in-One. ● ● ● ● ● Einrichtungshandbuch Im Einrichtungshandbuch finden Sie Anleitungen zum Einrichten des HP All-in-One und zum Installieren der Software. Führen Sie die Schritte in der angegebenen Reihenfolge aus.
Übersicht über den HP All-in-One Kapitel 1 So greifen Sie unter Windows auf die HP Photosmart-Hilfe zu: 1. Klicken Sie in HP Solution Center auf die Registerkarte für den HP All-in-One. 2. Klicken Sie im Bereich Geräteunterstützung auf Onlinebenutzerhandbuch oder Fehlerbehebung. – Wenn Sie auf Onlinebenutzerhandbuch klicken, wird ein Popup-Menü angezeigt. Sie können die Begrüßungsseite für das gesamte Hilfesystem öffnen oder zur speziellen Hilfeseite für den HP All-in-One wechseln.
Übersicht über den HP All-in-One So legen Sie großformatiges Papier ein: 1. Schieben Sie die Papierquerführung ganz nach außen. Hinweis Wenn Sie Papier im Format Letter oder A4 einlegen, ziehen Sie die Fachverlängerung vollständig heraus. 2. 3.
Übersicht über den HP All-in-One Kapitel 1 Legen Sie nicht zu viel Papier ein. Vergewissern Sie sich, dass der Stapel in das Zufuhrfach passt und nicht höher als die obere Kante der Papierquerführung ist. Hinweis Wenn Sie das Papierformat Legal verwenden, lassen Sie die Fachverlängerung geschlossen. So legen Sie Fotopapier im Format 10 x 15 cm in die Fotopapierkassette ein: 1. Nehmen Sie sämtliches Papier aus dem Zufuhrfach. 2. Lösen Sie die Fotopapierkassette mit Hilfe der Führungen. 10 3.
Schieben Sie die Papierlängs- und die Papierquerführung an das eingelegte Papier heran. 6. Richten Sie die Fotopapierkassette an der rechten Seite des Zufuhrfachs aus, und schieben Sie sie dann bis zum Anschlag in den Drucker. 7. Ziehen Sie die Fachverlängerung heraus, damit die gedruckten Fotos nicht herunterfallen. Wenn Sie mit dem Drucken fertig sind, nehmen Sie die Fotopapierkassette heraus und bewahren sie im Stauraum auf der linken Seite des HP All-in-One auf. 8.
Übersicht über den HP All-in-One Kapitel 1 So erstellen Sie eine Kopie über das Bedienfeld: 1. Vergewissern Sie sich, dass sich Papier im Zufuhrfach befindet. 2. Legen Sie das Original mit der bedruckten Seite nach unten so auf das Vorlagenglas, dass es vorne rechts anliegt. 3. Drücken Sie Start Kopieren Schwarz oder Start Kopieren Farbe, um den Kopiervorgang zu starten. Scannen eines Bildes Sie können den Scanvorgang sowohl über den Computer als auch über den HP All-inOne starten.
– – 2. 3. 4. 5. 6. 7. 8. Kurzanleitung Oberer Steckplatz: xD-Picture Card Zweiter Steckplatz von oben: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (mit separatem Adapter), Memory Stick Pro – Dritter Steckplatz von oben: CompactFlash (I, II) – Unterer Steckplatz: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card Drücken Sie die Taste OK, um Drucken auszuwählen. Wenn Sie OK drücken, wird das zuletzt auf die Speicherkarte aufgenommene Foto auf der Bedienfeldanzeige angezeigt.
Übersicht über den HP All-in-One Kapitel 1 9. Markieren Sie mit der Taste die Option Auswahl beendet, und drücken Sie dann OK. Der Bildschirm Druckzusammenfassung wird angezeigt. 10. Wählen Sie mit der Taste oder eine der folgenden Optionen aus, und drücken Sie anschließend OK. Druckoptionen Manuelles Auswählen des Papiertyps und Festlegen, ob das Foto mit Datum und Uhrzeit gedruckt wird. Standardmäßig ist die Option Papiertyp auf Automatisch und die Option Datumsstempel auf Aus eingestellt.
7. 8. Wählen Sie aus dem Menü Ablage Ihres Softwareprogramms die Option Drucken aus. Das Dialogfeld Drucken wird angezeigt und der Bildschirm Kopien & Seiten geöffnet. Wählen Sie für jede Option im Einblendmenü die geeigneten Druckeinstellungen aus. Klicken Sie auf Drucken, um mit dem Drucken zu beginnen. Auswechseln der Druckpatronen Führen Sie diese Anweisungen aus, wenn der Tintenstand niedrig ist.
Übersicht über den HP All-in-One Kapitel 1 Der Patronenwagen wird ganz nach rechts im HP All-in-One gefahren. 3. 4. 5. 16 1 Druckpatronenklappe 2 Patronenwagen Warten Sie, bis der Patronenwagen zum Stillstand gekommen ist, und drücken Sie dann leicht auf eine Druckpatrone, damit sie freigegeben wird. Die dreifarbige Druckpatrone befindet sich im linken Schacht. Die schwarze Druckpatrone oder Fotopatrone befindet sich im rechten Schacht.
Nehmen Sie die neue Druckpatrone aus der Verpackung, und ziehen Sie die Schutzfolie vorsichtig mit Hilfe der pinkfarbenen Lasche ab. Achten Sie darauf, dabei nur das schwarze Plastikgehäuse der Patrone zu berühren. 1 Kupferfarbene Kontakte 2 Klebestreifen mit pinkfarbener Lasche (muss vor dem Einsetzen entfernt werden) 3 Tintendüsen unter Schutzstreifen Vorsicht Berühren Sie auf keinen Fall die kupferfarbenen Kontakte und die Tintendüsen.
Übersicht über den HP All-in-One Kapitel 1 Wenn Sie eine schwarze Druckpatrone oder eine Fotopatrone einsetzen, schieben Sie sie in die rechte Halterung. 8. Schließen Sie die Patronenklappe. Reinigen des HP All-in-One Unter Umständen müssen Sie das Vorlagenglas und die Abdeckungsunterseite reinigen, um einwandfreie Kopien und Scandokumente zu erhalten. Außerdem können Sie das Gehäuse des HP All-in-One abwischen.
Trocknen Sie das Glas mit einem trockenen, weichen und fusselfreien Tuch. Schließen Sie das Netzkabel wieder an, und schalten Sie den HP All-in-One ein. Reinigen der Abdeckungsunterseite An der weißen Unterseite der Abdeckung des HP All-in-One befinden sich möglicherweise geringe Verunreinigungen. So reinigen Sie die Unterseite der Abdeckung: 1. Schalten Sie den HP All-in-One aus, ziehen Sie das Netzkabel ab, und heben Sie die Abdeckung an. 2.
2 Fehlerbehebung und Support Dieses Kapitel enthält Informationen zum Beheben von Problemen mit dem HP All-in-One. Außerdem finden Sie hier spezifische Informationen zur Installation und Konfiguration sowie einige Hinweise zum Betrieb des Geräts. Weitere Informationen zur Fehlerbehebung finden Sie in der Online-Hilfe der Software.
So können Sie die Software unter Mac OS deinstallieren und erneut installieren: 1. 2. 3. 4. 5. 6. 7. Trennen Sie die Verbindung zwischen dem HP All-in-One und dem Macintosh. Doppelklicken Sie auf den Ordner Programme:Hewlett-Packard. Doppelklicken Sie auf das Symbol für das HP Deinstallationsprogramm. Führen Sie die auf dem Bildschirm angezeigten Anweisungen aus. Starten Sie den Computer nach dem Deinstallieren der Software neu.
Kapitel 2 Lösung Fehlerbehebung und Support ● ● ● ● Stellen Sie sicher, dass das Netzkabel fest mit dem HP All-in-One und dem Netzteil verbunden ist. Verbinden Sie das Netzkabel mit einer geerdeten Steckdose, einem Überspannungsschutz oder einer Steckerleiste. 1 Stromanschluss 2 Netzkabel und Netzteil 3 Geerdete Steckdose Wenn Sie eine Steckerleiste verwenden, stellen Sie sicher, dass sie eingeschaltet ist. Sie können den HP All-in-One auch direkt an eine geerdete Steckdose anschließen.
Der HP All-in-One druckt nicht Lösung Wenn der HP All-in-One über ein USB-Kabel an den Computer angeschlossen ist und die beiden Geräte nicht miteinander kommunizieren, gehen Sie wie folgt vor: ● ● ● ● ● ● ● ● ● ● Kurzanleitung Wenn Sie den HP All-in-One über einen USB-Hub anschließen, vergewissern Sie sich, dass der Hub eingeschaltet ist. Ist dies der Fall, versuchen Sie, das Gerät direkt an Ihren Computer anzuschließen. Überprüfen Sie die anderen angeschlossenen Drucker oder Scanner.
Kapitel 2 ● ● ● Schließen Sie das USB-Kabel an einen anderen USB-Anschluss des Computers an. Starten Sie den Computer nach Überprüfung der Anschlüsse neu. Schalten Sie den HP All-in-One aus und wieder ein. Starten Sie den Computer nach Überprüfung der Anschlüsse neu. Schalten Sie den HP All-in-One aus und wieder ein. Deinstallieren Sie ggf. die Software für den HP All-in-One, und installieren Sie sie erneut. Weitere Informationen finden Sie unter Deinstallieren und Neuinstallieren der Software.
So beseitigen Sie Papierstaus durch die vordere Klappe: 1. Ziehen Sie das Zufuhrfach ggf. nach unten, um es zu öffnen. Öffnen Sie dann die Zugangsklappe zum Patronenwagen. 2. Ziehen Sie das Papier vorsichtig aus den Walzen heraus. 3. Schließen Sie die Zugangsklappe zu den Druckpatronen. 4. Drücken Sie Start Kopieren Schwarz, um den aktuellen Auftrag fortzusetzen.
Kapitel 2 Beheben von Problemen mit Druckpatronen 1. Fehlerbehebung und Support 2. 3. 4. 5. 6. 7. Nehmen Sie die schwarze Druckpatrone aus dem rechten Schacht. Fassen Sie die Tintendüsen und Kupferkontakte nicht an. Überprüfen Sie die kupferfarbenen Kontakte und die Tintendüsen auf eventuelle Beschädigungen. Stellen Sie sicher, dass die Schutzfolie entfernt wurde. Falls sich die Schutzfolie noch auf den Tintendüsen befindet, entfernen Sie ihn vorsichtig durch Ziehen der pinkfarbenen Lasche.
4. 5. Wenn das Problem auch weiterhin auftritt und Sie mit einem HP Kundendienstmitarbeiter sprechen müssen, treffen Sie die folgenden Vorbereitungen: a. Halten Sie den Namen des HP All-in-One bereit, der auf der Anzeige gemeldet wird. b. Drucken Sie einen Selbsttestbericht (siehe unten). c. Erstellen Sie eine Farbkopie, um ein Beispiel für das Druckproblem verfügbar zu haben. d. Überlegen Sie, wie sich das Problem präzise beschreiben lässt. e.
3 Technische Daten Dieser Abschnitt enthält die technischen Daten und die internationalen Zulassungsinformationen für den HP All-in-One. Systemanforderungen Informationen zu den Systemvoraussetzungen für die Software finden Sie in der Readme-Datei. Papierspezifikationen Dieser Abschnitt enthält Informationen zur Papierfachkapazität und zu den Papierformaten.
Kopierspezifikationen ● ● ● ● ● Kopierauflösung bis zu 4800 x 1200 dpi (optimiert) bei einer Scanauflösung von 1200 x 1200 ppi Digitale Bildverarbeitung Bis zu 50 Kopien von einem Original (je nach Modell) Vergrößerung auf 400 %, An Seite anpassen Die Kopiergeschwindigkeit hängt von der Komplexität des Dokuments ab.
Kapitel 3 Zulassungsmodellnummer Technische Daten Dem Gerät wurde zu Identifizierungszwecken eine modellspezifische Zulassungsnummer zugewiesen. Die Zulassungsmodellnummer Ihres Produkts lautet SDGOB-0602. Diese Modellidentifikationsnummer darf nicht mit dem Produktnamen (z. B. HP Photosmart C4100 All-inOne Series) oder der Modellnummer (z. B. Q8100A) verwechselt werden.
Gewährleistung HP Produkt Dauer der beschränkten Gewährleistung Software 90 Tage Druckpatronen Bis die HP Tinte verbraucht oder das auf der Druckpatrone angegebene Enddatum für die Garantie erreicht ist, je nachdem, welcher Fall zuerst eintritt. Diese Garantie gilt nicht für nachgefüllte, nachgearbeitete, recycelte, zweckentfremdete oder in anderer Weise manipulierte HP Tintenprodukte.
Technische Daten Kapitel 3 32 HP Photosmart C4100 All-in-One Series
www.hp.