User Manual

HP PDR Management Module Service Menu 51
Service Menu
This menu only appears when accessing the management module using a terminal emulation program.
Option number Submenu Description
1 Module Configuration Opens the HP PDR Management Module
Configuration Utility
2 PDR Pass-through Bypasses the management module and
allows direct communication with the PDR
3 Exit Exits the Service menu and resets the
management module
HP PDR Management Module Configuration Utility
Option number Submenu Description
1 PDR Monitor Displays PDR status information
2 Network Configuration Enables network configuration for the
management module
3 Modbus Configuration Configures ModBus protocol RTU and TCP
4 System Configuration Enables you to set the date, time, and
daylight saving time parameters
5 User Accounts Enables you select an entry to set up and
configure user accounts
s Save New Changes and
Restart
Saves changes and resets the management
module
r Restore Configuration to
Manufacturer Settings
Restores parameters to default settings
PDR Monitor submenu
Option number Submenu Description
1 PDR Alarms: 0 Alarms Displays active PDR alarms
2 PDR Meters Displays PDR input and output parameter
data
0 Previous Menu Returns to the previous menu
PDR Meters submenu
Output Type Output
Panel 1 Voltage 418, 417, 416 V (normal 252 V-456 V)
Panel 2 Voltage 418, 417, 416 V (normal 252 V-456 V)
Panel 1 Current 0, 0, 0 A (normal < 160 A)
Panel 2 Current 0, 0, 0 A (normal < 160 A)
Panel 1 Load 0, 0, 0 (normal < 100 %)