User Manual

HP PDR Management Module Service Menu 52
Output Type Output
Panel 2 Load 0, 0, 0 (normal < 100 %)
Network Configuration submenu
Option number Submenu Description
1 Network Settings Enables you to enter or change network
properties for the management module
2 Remote Console Enables you to enter or change parameters
for telnet access
3 Web Access Enables you to enter or change parameters
for web interface access
4 File Transfer (FTP) Enables or disables the FTP service
5 SNMP Enables you to configure SNMP managers
and SNMP traps
6 Emails Enables you to configure a mail server and
email event notifications
7 Session Settings Enables you to configure timeouts and retries
for remote sessions
0 Previous Menu Returns to the previous menu
Network Settings submenu
Option number Submenu Description
1 Static IP Address Enables you to set the management module
IP address
2 Static Subnet Mask Enables you to set the management module
subnet mask
3 Static Default Gateway Enables you to set the management module
default gateway
4 Toggle Boot Mode Enables you to toggle the boot mode
between BootP and Static IP
5 Ping Utility Pings the management module
0 Previous Menu Returns to the previous menu
Remote Console submenu
Option number Submenu Description
1 Protocol Selection Enables you to select telnet
2 Telnet Configuration Enables you to configure the port for telnet
0 Previous Menu Returns to the previous menu