Operation Manual

7. Press the power button to begin the reset.

A recovery system screen shows the reset process.

8. When the screen displays the message Data wipe complete, press the volume down (-) button

to highlight reboot system now, and then press the power button to select.

the tablet restarts.

Starting up using the recovery menu

If your tablet is unable to boot into the operating system, you can perform a system recovery by

directly accessing the Recovery menu.

1. Turn off your tablet, and then plug in the AC adapter.

2. With the tablet turned off, press and hold the volume up (+) button and the power button at the

same time.

3. When the system recovery menu appears, use the volume (+) up and volume (-) down buttons

to highlight wipe data/factory reset, and then press the power button to confirm the selection.

4. Use the volume (+) up and volume (-) down buttons to highlight Yes — delete all user data, and

then press the power button to confirm the selection.

5. Use the volume (+) up and volume (-) down buttons to highlight reboot system now, and then

press the power button to confirm the selection.

Updating the tablet using an over-the-air (OTA) update

1. Turn off your tablet and, if a battery powered device, plug in the AC adapter.

2. Turn on your tablet, and then connect to the Internet.

Swipe down twice from the top edge, and then touch the Settings icon .

4. Touch About tablet , touch System updates, and then touch CHECK FOR UPDATE.

5. Follow the on-screen instructions to finish the process. The tablet may restart as updates are

applied.

Starting up using the recovery menu 37