Getting Started HP Notebook
© Copyright 2011 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Welcome Finding information ............................................................................................................................... 2 2 Getting to know your computer Top ....................................................................................................................................................... 4 TouchPad ............................................................................................................................
Using an optional external numeric keypad ...................................................... 30 Using pointing devices ....................................................................................................................... 31 Setting pointing device preferences ................................................................................... 31 Using the pointing stick ......................................................................................................
Performing a recovery ....................................................................................................... 56 Using the Windows recovery tools .................................................................... 56 Using f11 recovery tools .................................................................................... 57 Using a Windows Vista operating system DVD (purchased separately) .......... 58 8 Customer support Contacting customer support ......................................
viii
1 Welcome ● Finding information After you set up and register the computer, it is important to take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page 21. ● Update your antivirus software—Protect your computer from damage caused by viruses. The software is preinstalled on the computer and includes a limited subscription for free updates.
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about Quick Setup poster ● How to set up the computer ● Help to identify computer components Getting Started guide ● Computer features To access this guide: ● How to connect to a wireless network Select Start > Help and Support > User Guides.
Resources For information about – or – Go to http://www.hp.com/ergo. Worldwide Telephone Numbers booklet HP support telephone numbers This booklet is provided with your computer. HP Web site ● Support information To access this Web site, go to http://www.hp.com/ support. ● Ordering parts and finding additional help ● Accessories available for the device Limited Warranty* Warranty information To access the warranty: Select Start > Help and Support > User Guides > View Warranty Information.
2 Getting to know your computer ● Top ● Front ● Right ● Left ● Display ● Rear ● Bottom Top TouchPad 4 Chapter 2 Getting to know your computer
Component Description (1) Pointing stick (select models only) Moves the pointer and selects or activates items on the screen. (2) Left pointing stick button Can be used with the pointing stick and functions like the left button on an external mouse. (3) TouchPad on/off button Turns the TouchPad on and off. (4) TouchPad Moves the pointer and selects or activates items on the screen. NOTE: Vertical scrolling is supported on the right edge of the TouchPad.
Component (1) Description TouchPad on/off light ● Amber: The TouchPad is off. ● Off: The TouchPad is on. (2) Caps lock light On: Caps lock is on. (3) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. ● On: The computer is on.
Buttons and fingerprint reader NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) TouchPad on/off button Turns the TouchPad on and off. (2) Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
Component Description If the computer has stopped responding and Windows® shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings: ● Windows 7—Select Start > Control Panel > System and Security > Power Options. ● Windows Vista—Select Start > Control Panel > System and Maintenance > Power Options ● Or refer to the HP Notebook Reference Guide.
Keys NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) Function keys Execute frequently used system functions when pressed in combination with the fn key.
Component 10 Description (3) fn key Executes frequently used system functions when pressed in combination with a function key, the num lk key, or the esc key. (4) Start key Displays the Start menu. (5) Menu key Displays the active program’s shortcut menu (same as rightclick menu). (6) Integrated numeric keypad When the keypad has been enabled, the keys can be used like an external numeric keypad.
Front NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) Display release latch Opens the computer. (2) Wireless light ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off. ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation.
Component Description (5) ● Blinking turquoise: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. (6) Hard drive light Speakers (2) Produce SRS Premium sound (select models only). NOTE: To use the SRS Premium sound software, select Start > All Programs > SRS Premium Sound.
Right NOTE: Refer to the illustration that most closely matches your computer. Component (1) Description Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. NOTE: When a device is connected to the headphone jack, the computer speakers are disabled. (2) Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.
Left NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) USB port Connects an optional USB device. (2) USB powered/charging port Connects an optional USB device. (3) ExpressCard slot (select models only) Supports optional ExpressCards. (4) Media Card Reader Supports the following digital card formats: ● Secure Digital (SD) Card ● MultiMediaCard (MMC) (5) 1394 port Connects an optional IEEE 1394 or 1394a device, such as a camcorder.
Component Description (1) USB ports (2) Connects an optional USB device. (2) Media Card Reader Supports the following digital card formats: ● Secure Digital (SD) Card ● MultiMediaCard (MMC) (3) 1394 port Connects an optional IEEE 1394 or 1394a device, such as a camcorder. (4) Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating.
Display NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) Turns off the display or initiates Sleep if the display is closed while the power is on. Internal display switch NOTE: The display switch is not visible from the outside of the computer. (2) WLAN antennas (3)* Send and receive wireless signals to communicate with wireless local area networks (WLAN).
Component Description (9) Used to activate the keyboard light. Keyboard light button *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region. These notices are located in Help and Support.
Rear NOTE: Refer to the illustration that most closely matches your computer. Component 18 Description (1) RJ-11 (modem) jack Connects a modem cable. (2) Serial port Connects an optional device such as a serial modem, mouse, or printer. (3) Power connector Connects an AC adapter. (4) DisplayPort Connects an optional digital display device, such as a high-performance monitor or projector.
Bottom NOTE: Refer to the illustration that most closely matches your computer.
Component Description (1) Battery release latch Releases the battery from the battery bay. (2) Docking connector Connects an optional docking device. (3) Bottom cover release latch Releases or locks the bottom cover. (4) SIM slot Contains a wireless subscriber identity module (SIM). The SIM slot is located inside the battery bay. (5) Battery bay Holds the battery. (6) Vents (3) Enable airflow to cool internal components.
3 Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection. Refer to Connecting to an existing WLAN on page 23 or Setting up a new WLAN network on page 23.
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service. NOTE: Your ISP will give you a user ID and password to access the Internet. Record this information and store it in a safe place.
Connecting to an existing WLAN 1. Turn on the computer. 2. Be sure that the WLAN device is on. 3. Click the network icon in the notification area, at the far right of the taskbar. 4. Select a network to connect to. 5. Click Connect. 6. If required, enter the security key.
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network: ● Windows 7—Select Start > Control Panel > Network and Internet > Network and Sharing Center > Set up a new connection or network > Set up a network. Then follow the on-screen instructions.
4 HP QuickWeb Getting started The HP QuickWeb environment provides a fun and engaging way to perform many of your favorite activities. Your computer is ready to go within seconds of turning it on, allowing you to rapidly access the Internet, widgets, and communication programs. Simply press the QuickWeb button on your computer, and then start browsing the Internet, communicating with Skype, and exploring other HP QuickWeb programs.
Starting HP QuickWeb ● To start HP QuickWeb, press the QuickWeb button when the computer is off or in Hibernation. The following table explains the different behaviors of the QuickWeb button. Button Bahavior QuickWeb button ● When the computer is off or in Hibernation, opens HP QuickWeb. ● When the computer is in Microsoft Windows, opens the default Web browser. ● When the computer is in HP QuickWeb, opens the default Web browser.
5 Keyboard and pointing devices ● Using the keyboard ● Using pointing devices 27
Using the keyboard Identifying the hotkeys NOTE: Refer to the illustration that most closely matches your computer. A hotkey is a combination of the fn key (1) and either the esc key (2) or one of the function keys (3). To use a hotkey: ▲ Briefly press the fn key, and then briefly press the second key of the hotkey combination. Hotkey combination Description fn+esc Displays system information. fn+f3 Initiates Sleep, which saves your information in system.
Hotkey combination Description CAUTION: To reduce the risk of information loss, save your work before initiating Sleep. NOTE: If a critical battery level occurs while the computer is in the Sleep state, the computer initiates Hibernation and the information stored in memory is saved to the hard drive. The function of the fn+f3 hotkey can be changed. For example, you can set the fn+f3 hotkey to initiate Hibernation instead of Sleep.
(1) Component Description num lk key Alternates between the navigational and numeric functions on the integrated numeric keypad. NOTE: The keypad function that is active when the computer is turned off remains on when the computer is turned back on. (2) Integrated numeric keypad Can be used like an external numeric keypad. (3) Num lock light ● On: The keypad function is numeric. ● Off: The keypad function is navigational.
When num lock on an external keypad is turned on, the num lock light on the computer is turned on. When num lock on an external keypad is turned off, the num lock light on the computer is turned off. To turn num lock on or off on an external keypad as you work: ▲ Press the num lk key on the external keypad, not on the computer.
Turning the TouchPad off and on To turn the TouchPad off and on, quickly double-tap the TouchPad on/off light. NOTE: The TouchPad on/off light is off when the TouchPad is on. Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go.
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. NOTE: TouchPad gestures are not supported in all programs. To view the demonstration of a gesture: 1. Right-click the Synaptics icon click TouchPad Properties. 2.
Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right motion. NOTE: Scrolling speed is controlled by finger speed. NOTE: Two-finger scrolling is enabled at the factory. Pinching/Zooming Pinching allows you to zoom in or out on images or text. ● Zoom in by placing two fingers together on the TouchPad, and then moving them apart.
Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock. To reverse the rotation, move your right forefinger from 3 o’clock to 12 o’clock. NOTE: Rotating must be done within the TouchPad zone. NOTE: Rotating is disabled at the factory.
6 Maintenance ● Inserting or removing the battery ● Removing or replacing the bottom cover ● Replacing or upgrading the hard drive ● Replacing a drive in the upgrade bay ● Adding or replacing memory modules ● Updating programs and drivers ● Using SoftPaq Download Manager ● Cleaning your computer Inserting or removing the battery NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide. To insert the battery: 1.
To remove the battery: CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. 1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery release latch (1) to release the battery. 3. Remove the battery from the computer (2).
Removing or replacing the bottom cover CAUTION: To prevent information loss or an unresponsive system: Save your work and shut down the computer before adding or replacing a memory module or hard drive. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.
3. Slide the bottom cover towards the battery bay until the bottom cover snaps into place. 4. With the battery bay toward you, slide the bottom cover release latch to the left (3), and if you choose to, insert and tighten the optional screw (4) to hold the bottom cover in place. Slide the release latch to the right to lock the bottom cover (5). NOTE: 5. If you want to use the optional screw, it is stored inside the bottom cover. Insert the battery (see Inserting or removing the battery on page 36).
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. Removing the hard drive To remove the hard drive: 40 1.
Installing a hard drive To install the hard drive: 1. Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the hard drive bay (2). 2. Pull the plastic tab (3) towards the center of the computer to engage the hard drive with the connector. 3. Tighten the hard drive screws (4). 4. Replace the bottom cover (see Replacing the bottom cover on page 38). 5. Insert the battery (see Inserting or removing the battery on page 36). 6.
To remove a hard drive from the upgrade bay: 1. Save your work. 2. Shut down the computer and close the display. 3. Disconnect all external hardware devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the upgrade bay toward you. 6. Remove the battery (see Inserting or removing the battery on page 36). 7. Remove the bottom cover (see Removing the bottom cover on page 38). 8.
To install a hard drive in the upgrade bay: 1. Insert the hard drive (1) into the upgrade bay, and then tighten the upgrade bay screw (2). 2. Replace the hard drive screws. 3. Replace the bottom cover (see Replacing the bottom cover on page 38). 4. Insert the battery (see Inserting or removing the battery on page 36). 5. Turn the computer right-side up, and then reconnect AC power and external devices to the computer. 6. Turn on the computer.
To remove an optical drive from the upgrade bay: 1. Save your work. 2. Shut down the computer and close the display. 3. Disconnect all external hardware devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the upgrade bay toward you. 6. Remove the battery (see Inserting or removing the battery on page 36). 7. Remove the bottom cover (see Removing the bottom cover on page 38). 8.
2. Tighten the upgrade bay screw (2). 3. Replace the bottom cover (see Replacing the bottom cover on page 38). 4. Insert the battery (see Inserting or removing the battery on page 36). 5. Turn the computer right-side up, and then reconnect AC power and external devices to the computer. 6. Turn on the computer. Adding or replacing memory modules The computer has one memory module compartment.
To add or replace a memory module: 1. Save your work and shut down the computer. 2. Disconnect AC power and external devices connected to the computer. 3. Remove the battery (see Inserting or removing the battery on page 36). 4. Remove the bottom cover (see Removing the bottom cover on page 38). 5. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. b.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module. 7. Replace the bottom cover (see Replacing the bottom cover on page 38). 8. Insert the battery (see Inserting or removing the battery on page 36). 9. Connect AC power and external devices to the computer. 10. Turn on the computer.
Using SoftPaq Download Manager HP SoftPaq Download Manager (SDM) is a tool that provides quick access to SoftPaq information for HP business computers without requiring the SoftPaq number. Using this tool, you can easily search for SoftPaqs and then download and unpack them. SoftPaq Download Manager works by reading and downloading, from the HP FTP site, a published database file containing computer model and SoftPaq information.
Cleaning your computer ● Cleaning products ● Cleaning procedures Cleaning products Use the following products to safely clean and disinfect your notebook or tablet PC: ● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example: germicidal disposable wipes. These wipes come in a variety of brand names.
Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that the display is dry before closing the display. Cleaning the sides and cover To clean and disinfect the sides and cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable germicidal disposable wipe. NOTE: debris.
7 Backup and recovery Windows 7 ● Backing up your information ● Performing a system recovery To protect your information, use Windows Backup and Restore to back up individual files and folders, back up your entire hard drive (select models only), create system repair discs (select models only) by using the installed optical drive (select models only) or an optional external optical drive, or create system restore points.
current backup. The system repair discs (select models only) are used to start up (boot) the computer and repair the operating system in case of system instability or failure. Your initial and subsequent backups allow you to restore your data and settings if a failure occurs. You can back up your information to an optional external hard drive, a network drive, or discs. Note the following when backing up: ● Store personal files in the Documents library, and back it up regularly.
Using the Windows recovery tools To recover information you previously backed up: 1. Select Start > All Programs > Maintenance > Backup and Restore. 2. Follow the on-screen instructions to recover your system settings, your computer (select models only), or your files. To recover your information using Startup Repair, follow these steps: CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard drive.
3. If the HP Recovery partition is listed, restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. 4. Press f11 while the “Press for recovery” message is displayed on the screen. 5. Follow the on-screen instructions. Using a Windows 7 operating system DVD (purchased separately) To order a Windows 7 operating system DVD, go to http://www.hp.
Windows Vista To protect your information, use the Backup and Restore Center to back up individual files and folders, back up your entire hard drive (select models only), or create system restore points. In case of system failure, you can use the backup files to restore the contents of your computer.
NOTE: Be sure that the computer is connected to AC power before you start the backup process. NOTE: The backup process may take over an hour, depending on file size and the speed of the computer. 1. Select Start > All Programs > Maintenance > Backup and Restore Center. 2. Follow the on-screen instructions to back up your entire computer (select models only) or your files.
Using f11 recovery tools CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled. Personal files must be restored from a backup.
Using a Windows Vista operating system DVD (purchased separately) To order a Windows Vista operating system DVD, go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. You can also order the DVD by calling technical support. For contact information, refer to the Worldwide Telephone Numbers booklet included with the computer. CAUTION: Using a Windows Vista operating system DVD completely erases hard drive contents and reformats the hard drive.
8 Customer support ● Contacting customer support ● Labels 59
Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can: ● Chat online with an HP technician.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component (1) Product name (2) Serial number (s/n) (3) Part number/Product number (p/n) (4) Warranty period (5) Model description Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer.
9 62 Specifications ● Input power ● Operating environment Chapter 9 Specifications
Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Operating environment Factor Metric U.S.
Index Symbols/Numerics 1394 port, identifying 14, 15 A accessory battery connector, identifying 20 ambient light sensor, identifying 16 ambient light, hotkey 29 audio-in (microphone) jack 13 audio-out (headphone) jack 13 B Backup and Restore 52 Backup and Restore Center 55 battery bay 20, 61 battery light 11 battery release latch 20 battery, replacing 36 Bluetooth compartment, identifying 20 Bluetooth label 61 bottom cover release latch, identifying 20 bottom cover, removing or replacing 38 buttons calcula
keypad, integrated numeric 10 keypads, identifying identifying 29 keys esc 9 fn 10 function 9 menu 10 num lk 10 start 10 L labels Bluetooth 61 HP Mobile Broadband Module 61 Microsoft Certificate of Authenticity 61 regulatory 61 serial number 61 SIM 61 wireless certification 61 WLAN 61 latch, battery release 20 light sensor, identifying 16 lights battery 11 calculator 6 caps lock 6 hard drive 12 HP QuickWeb 6 mute 6 num lock 6 power 6, 11 TouchPad on/off 6 webcam 16, 17 wireless 6, 11 M Media Card Reader, id
V vents, identifying 14, 15, 20 volume keys, identifying 29 volume mute button, identifying 8 W webcam 16, 17 webcam light, identifying 16, 17 webcam, identifying 16, 17 Windows 7 operating system DVD 54 Windows Backup and Restore 51 Windows Vista operating system DVD 58 wireless antennas, identifying 16, 17 wireless button, identifying 8 wireless certification label 61 wireless lights 6, 11 wireless network (WLAN), equipment needed 23 wireless network, connecting 22 wireless router, configuring 24 wirele
