HP Pavilion md5020n/md5820n/md5880n/md6580n High-Definition Microdisplay TV User’s Guide Downloaded from www.Manualslib.
© Copyright 2005 Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Safety Markings The following safety markings may be present on the back of the TV or behind the front access door. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbol Purpose This symbol on the TV is intended to alert the user to the presence of uninsulated “dangerous voltage” within the TV's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people.
18. Keep a clearance of at least 10 cm (4 inches) between the vents on the back of the TV and nearby walls or enclosures. Allow free air circulation to prevent excessive heat buildup that could shut down or damage the TV. Keep flammable objects or objects susceptible to heat damage at least 0.5 m (2 ft) away from the vents. 19. Do not allow liquid, food, or small objects to get inside the TV. If material gets inside, contact HP for assistance. 20.
Contents Safety Markings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 Setting Up the TV What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Adjusting the TV Adjusting the Picture and Sound . . . . . . . . . . Choosing the Best Picture Mode . . . . . . . Adjusting the Size of the Picture . . . . . . . Adjusting the Picture for Best Color . . . . . Adjusting Other Picture Settings . . . . . . . Adjusting Sound Settings . . . . . . . . . . . . Customizing Your Channels and Sources. . . . Adding or Deleting a Channel . . . . . . . . Setting Up Favorite Channels . . . . . . . . . Labeling the Sources . . . . . . . . . . . . . . .
1 Setting Up the TV What’s in the Box Before setting up your TV, be sure your shipping box includes the following items. If the shipping box does not contain all of the following items, contact HP. • • • • • TV Power cord Remote control with two AAA batteries Quick setup guide User’s guide NOTE: The TV does not include audio/video cables because most external equipment comes with the required cables. Cables are also available from HP and at most electronics stores.
Features and Connectors TV at a Glance 8 Item Function 1 Speakers Stereo sound, plus subwoofer for low-frequency effects. 2 Access door Convenient access to connection panel and lamp module. To open, press in above HP logo and release. 3 Lamp cover Cover for replaceable lamp module. 4 Status lights Shows power status, plus lamp and temperature problems, even when the access door is closed. 5 Front cable tunnel Path for cables coming out the front of the TV.
Connector Panel Item Function 1 CableCARD option Provides space for adding support for premium cable functions. 2 Cable input connector Connects RF coax cable from a cable service. 3 Antenna input connector Connects RF coax cable from an antenna. 4 Service connectors For HP service use only. 5 HDMI input connectors Connects up to two HDMI or DVI-D sources. HDMI 2 has an optional audio input. 6 Computer VGA input connectors Connects a computer to show its screen and play its audio.
Setting Up the TV—The Basics Planning Your Layout Consider the following suggestions when planning your room layout: • • • • • • • For the most comfortable viewing, place your seating around the center of the TV. The best viewing distance is roughly 3 to 8 m (9 to 25 ft), but personal preferences vary widely. For prolonged viewing of standard-definition TV channels, the upper end of this range might be more comfortable. Design the room so you can control the ambient light.
Installing Batteries in the Remote Control 1. 2. 3. On the back of the remote control, press the latch on the battery cover and lift off the cover 1. Insert two AAA batteries 2. Observe the + marks on the batteries. Insert the tab on the battery cover into the case, and then snap the cover into place. Planning for Other Equipment Planning Your System Setup The way you connect the individual components of your entertainment system depends on the devices you have.
Connecting and Routing Cables This TV provides convenient access to video and audio cable connections at the front of the TV. And it provides simple paths for running the cables out the front or back. CAUTION: Do not pull the door open by its corners. This can damage the latch. Push in above the HP logo instead. • To plug in a cable, open the access door by pushing and releasing the door. Push above the HP logo. • • For permanent connections, run the cables through the tunnel toward the back of the TV 1.
Choosing Your Video Connections Many video devices have more than one type of output port. When you connect a device to the TV, choose the connection that provides the best picture quality. The following table shows different types of connectors with the highest picture quality listed at the top of the table. Highest quality HDMI connection. Highest-quality, high-definition digital picture and digital surround sound in one connection. DVI-D connection.
Cables for HDMI, DVI-D, Component, S-Video, and Composite Connections The following diagrams show how to connect video devices with different types of video outputs. Use the highest quality connection available on the device. HDMI connection • HDMI cable NOTE: You can connect to the HDMI 1 and HDMI 2 inputs on the TV. The HDMI cable carries both the video and audio signals. 14 Setting Up the TV Downloaded from www.Manualslib.
DVI-D connection • DVI-toHDMI cable (or HDMI cable with DVI-to-HDMI adapter) • Stereo RCA cable (two RCA) NOTE: If you are using the TV speakers, connect a DVI device only to the HDMI 2 input on the TV. If you are connecting audio directly to a sound system, you can connect DVI devices to the HDMI 1 and HDMI 2 inputs. Component-video (YPbPr) connection • Component-video cable (three RCA) • Stereo RCA cable (two RCA) NOTE: You can connect to the Component 1 and Component 2 inputs on the TV.
S-video connection • S-video cable • Stereo RCA cable (two RCA) NOTE: You can connect to the Video 1, Video 2, and Video 3 inputs on the TV. Only one S-video or composite-video connection is supported for each of these three inputs. Composite-video connection • Composite-video/audio cable (three RCA) or separate video and audio cables. NOTE: You can connect to the Video 1, Video 2, and Video 3 inputs on the TV. Only one S-video or composite-video connection is supported for each of these three inputs.
Making Your Connections If you have a TV antenna or cable service, use one of the basic connections listed in the following tables. If you have other equipment, find the following examples that match your equipment. Basic antenna and cable connections To connect this equipment... See... Antenna page 18 Standard cable (no set-top cable box) page 19 Cable with set-top cable box page 20 Other connections To connect this equipment... See...
Antenna If your antenna cable has a standard coaxial connector, connect the cable to the TV as shown in the following illustration. TIP: If your antenna has flat, twin-lead cable or other type of cable, connect the antenna cable to a coaxial adapter; then connect the adapter to the TV antenna input. 18 To do this... Do this... Watch channels received by the antenna Press Source and select Antenna. Scan for available channels See “Finding Your Channels” on page 32.
Standard Cable If your cable service does not require a set-top cable box (STB), connect the cable to the TV as shown in the following illustration. This setup enables you to watch unscrambled channels. NOTE: Use this same connection if you install a CableCARD in your TV. See “Installing a CableCARD” on page 30. To do this... Do this... Watch cable channels Press Source and select Cable. Scan for available channels See “Finding Your Channels” on page 32.
Cable with Set-Top Cable Box If your cable service requires a set-top cable box (STB) to view scrambled channels, connect the components to the TV as shown in the following illustration. This setup enables you to watch scrambled and unscrambled channels. NOTE: • • • • 20 If your cable box has different connectors from those shown, use the highest quality video connection available. Observe the color-coding on connectors.
Satellite Receiver If you have a satellite receiver (SAT) without a VCR or personal digital video recorder (DVR), you can connect it as shown in the following illustration. NOTE: If your device has different connectors from those shown, use the highest quality video connection available. Observe the color-coding on connectors. To do this... Do this... Watch satellite channels Press Source and select Component 1.
Cable and VCR/DVR If you have standard cable service or have a CableCARD installed and you have a VCR or personal DVR, you can connect them as shown in the following illustration. You can also use this connection if you have a DVR with built-in cable box capabilities. NOTE: • • 22 If your device has different connectors from those shown, use the highest quality video connection available. Observe the color coding on connectors.
Cable Box and VCR/DVR If you have a set-top cable box (STB), and you have a VCR or personal DVR, you can connect them as shown in the following illustration. NOTE: • • • • If your devices have different connectors from those shown, use the highest quality video connections available. Observe the color coding on connectors. For digital cable, your set-top cable box might require a special two-direction splitter. Contact your cable provider for information.
Satellite Receiver and VCR/DVR If you have a satellite receiver and you have a VCR or personal DVR, you can connect them as shown in the following illustration. NOTE: If your devices have different connectors from those shown, use the highest quality video connections available. Observe the color coding on connectors. 24 To do this... Do this... Watch satellite channels Press Source and select Component 1. Watch VCR or DVR channels Press Source and select Video 1.
DVD Player or Video Gaming Device If you have a DVD player, video gaming device, or other device that has a standard video output, you can connect it as shown in the following illustration. NOTE: • • • If your devices have different connectors from those shown, use the highest quality video connections available. Observe the color coding on connectors. For a device connected temporarily, such as a camcorder or gaming device, run the cable through the tunnel under the front of the TV. To do this...
Audio: Stereo Sound System If you have a stereo sound system, you can play the TV sound through the sound system. You can connect the stereo system as shown in the following illustration. NOTE: • • • • 26 Observe the color coding on connectors. You can disable the TV speakers and listen to only the stereo speakers. The volume buttons on the TV remote control normally adjust the volume of the TV stereo output. This means you do not have to adjust the volume on the stereo system.
Audio: Surround Sound or AV Receiver If you have a 5.1 surround sound system or audio-video receiver, you can make the audio connection to your TV as shown in the following illustration. You also can connect other equipment to the sound system. NOTE: • • • • • Observe the color-coding on connectors. The digital audio output on the TV sends Dolby Digital surround sound only when you are viewing a source connected to an antenna, cable, or HDMI input and only if the program contains surround sound.
Computer If your computer has a standard VGA video port, you can connect it to your TV as shown in the following illustration. If the computer has DVI-D or S-video output, you can connect it to the TV as shown in “Cables for HDMI, DVI-D, Component, S-Video, and Composite Connections” on page 14. NOTE: • • 28 If the computer display does not appear on the TV, you might have to press a combination of keys on the computer to turn on the computer’s VGA output.
Using a CableCARD By installing a CableCARD in your TV, you can enjoy features normally provided by a set-top cable box without connecting a cable box or operating another piece of equipment. For example, a CableCARD can decode scrambled cable channels in your TV. NOTE: The availability, setup, and pricing of CableCARD service is determined by your local cable provider, not by HP. Contact your cable provider for information about this service in your area.
4. 5. Insert the CableCARD module 1 into the opening and firmly press it into place until the front plate is flush with the panel. Tighten the two screws 2. Installing a CableCARD You must obtain the CableCARD from your local cable provider. After installing the card, follow any setup instructions provided with the card. 1. Hold the CableCARD with the front label facing up, and then insert it into the CableCARD slot. 2. 3. Gently push the card into the slot until it stops.
Turning the TV On and Off Plugging In the Power Cord 1. 2. Connect one end of the power cord to the back of the TV. Connect the other end to a grounded electrical circuit. Turning On the TV • • Press the power button on the side of the TV. or On the remote control, press Device until TV is selected, and then press the power button. The TV might take a minute or so to warm up and display a bright picture. The blue power light blinks during warm up.
Turning Off the TV • • Press the power button on the TV. or On the remote control, press Device until TV is selected, and then press the power button. The internal fans continue to run for a short time during the cool-down period. Even though the TV is off, it uses a small amount of power internally. CAUTION: Do not disconnect power until the TV has cooled and the fan stops running—up to three minutes after turning it off. Otherwise, you might shorten the life of the lamp.
Setting the Time and Date TIP: In many areas, the TV can automatically set the time and date using information on certain channels. This keeps the clock accurate, even following a power outage. However, the TV can take an hour or more to discover the required information. 1. 2. 3. Press Info to display detailed source information. If the time and date are displayed and are correct, stop here. Press Settings and go to Setup > Time > Clock.
Setting Up the TV Downloaded from www.Manualslib.
2 Using the Remote Control Overview of the Buttons Use the remote control to control all aspects of the TV operation. In addition, you can program the remote control to operate other equipment in your entertainment system. Remote control Item power button Function Turns the TV or other device on and off. STB DVD TV AUDIO Shows which device is being controlled by the remote DVR AUX control (set-top cable box, DVD player, TV, audio system, digital video recorder, auxiliary).
Controlling the TV NOTE: Before using the remote control, install two AAA batteries. See “Installing Batteries in the Remote Control” on page 11. Use the TV remote control to direct the complete operation of the TV. See the illustration on page 35. To do this... Do this... Control the TV Press Device until TV is selected. Turn the TV on and off Press Change the channel Press Ch+ or Ch– or see “Changing the Channel” on page 43.
DVD Player Includes DVD/VCRs.
Audio Device Includes receivers, tuners, amplifiers, home theaters, cassette recorders, digital audio tape recorders, and phonographs.
VCR Includes TV/VCRs and DVD/VCRs.
Controlling Other Devices After you program the remote control for another device, you can control that device using these basic functions. 1. 2. Press Device to select the indicator for the device you want to operate. You cannot select an indicator that is not programmed. Press buttons on the remote control to operate the device. See the following tables. NOTE: The following lists show basic functions. Some devices might support other functions not listed below.
Audio system, audio/video receiver To do this... Press... Adjust volume Vol+ and Vol–* * Temporarily turn sound off and on Change source Source * While any indicator is selected. Personal digital video recorder To do this... Press... Play Pause Stop Record Rec Fast forward Fast backward Jump forward Jump backward Display channel list one or more times Guide Display list of recordings Menu HP projector To do this... Press...
Using the Remote Control Downloaded from www.Manualslib.
3 Watching the TV Watching a Show The following topics show several ways to control your TV or video show. If you want to adjust the picture or the TV, see “Adjusting the Picture and Sound” on page 49. Changing the Channel There are several ways to change channels on the TV. To do this... Press... Browse to a channel Ch+ and Ch– Go to a channel For standard channels, 0 through 9 and then Enter. You can enter channels as 1,2, or 3 digits. Examples: 12, 012.
Viewing Closed Captions The TV enables you to view captions for certain shows and movies received on the TV antenna input and cable input. NOTE: If you have a set-top cable box or satellite receiver not connected to the TV’s antenna input or cable input, you cannot use the TV to control captions for this source. You must use whatever options are provided by the cable or satellite equipment.
Watching Two Pictures S Press the green/PIP button on the remote control one or more times to cycle through these options: • Overlapping pictures (PIP) • Side-by-side pictures (POP) • No second picture When two pictures are shown, you can control their configuration. The “active picture” is the one with sound and that sometimes has a border. To do this... Find the active picture Press...
Applying Parental Controls The TV enables you to control certain types of shows, movies, and channels displayed on the TV, such as programs received on the antenna input and cable input. NOTE: If you have a set-top cable box or satellite receiver not connected to the TV’s antenna input or cable input, you cannot use the TV controls to block programs for this source. You must use whatever controls are provided by the cable or satellite equipment. TIP: Access to parental controls is protected by a password.
Rating Description USA TV age ratings TV-Y All children TV-Y7 Directed to children age 7 and above TV-G General audience TV-PG Parental guidance suggested TV-14 Parents strongly cautioned TV-MA Mature audiences only USA TV content ratings FV Fantasy or cartoon violence V Violence L Coarse or crude indecent language S Sexual situations D Suggestive or sexual dialog USA movie ratings G General audience (all ages) PG Parental guidance suggested (some material may not be suitable for
Blocking Certain Channels You can also block any channels you do not want to show, regardless of their content ratings. 1. 2. 3. 4. 5. Press Settings, go to Lock, and press OK. If no password is set, when prompted, press a sequence of four 0 through 9 buttons for the new password. When prompted, press the same buttons again. If a password is set, when prompted, press the buttons for your password. Go to Lock > Channel. In the list of channels, hidden channels are highlighted in gray.
4 Adjusting the TV Adjusting the Picture and Sound Choosing the Best Picture Mode You can quickly choose a different picture mode to make adjustments to the picture. Picture modes can control properties, such as color and brightness. They let you easily choose the best settings for ambient lighting and the type of video content. S Press Picture one or more times to select the picture mode that gives the best picture. • • • • Normal mode—for watching most programs in average lighting conditions.
TIP: If you can set the video output from a source device to have 16:9 aspect (wide-screen picture), you should select that setting. Refer to the instructions for the video device. This provides maximum compatibility between the device and the TV. Adjusting the Picture for Best Color You can fine tune the picture settings on your TV to get the best color and image quality. You can perform these steps for each input port that you use. Do them in the order shown.
Customizing Your Channels and Sources Adding or Deleting a Channel You can manually add or delete channels in the list of channels for the antenna or cable input, which enables you to add a new channel that becomes available or hide a channel you want to omit when browsing channels. 1. 2. 3. 4. Optional: tune to the channel you want to add or delete. Press Settings and go to Setup > Channel setup > Add/Remove cable or Add/Remove antenna, depending on the source (cable or antenna).
Using the On-Screen Menu Changing Settings Using the Menu You can change TV settings using the on-screen menu. These steps show the general operation, but you can always look for the prompts near the bottom of the menu screen. 1. 2. 3. 4. 5. 6. 7. On the remote control, press Device to select TV. Press Settings to display the on-screen menu. Press up and down to highlight the desired menu and then press OK to go into that menu.
Picture Menu Some picture adjustments are used only for certain input sources. Unavailable adjustments are shown in gray in the on-screen menu. Setting Description Picture mode Adjusts color and picture settings to one of several combinations designed for different types of viewing situations. You can change the picture mode at any time to get the best picture from different sources in different environments. You can also customize each picture mode for each source.
Sound Menu Setting Description Sound mode Adjusts sound settings to one of several combinations designed for different listening situations. You can customize each sound mode. Quiet mode turns off the subwoofer. Volume Adjusts the loudness of the sound. Treble Adjusts the loudness of higher pitches. Bass Adjusts the loudness of lower pitches. Balance Adjusts the relative loudness of left and right channels. SRS TruSurround XT Simulates rich surround sound experience on two speakers.
Lock Menu Setting Description Lock mode Sets whether programs are blocked according to settings in this menu. If you override the lock setting to watch a program, the mode temporarily appears as Suspend. Rating Selects the level of audience and blocks programs with ratings above this level. Applies to programs on the antenna and cable inputs. Customize rating Adjusts individual rating permissions. If you change any ratings, the Rating level automatically changes to Custom.
Setup Menu Setting Description Language Selects the language used by the on-screen menu. Channel setup Configures channels for the antenna or cable input. Cable system Sets the frequency standard used by the TV’s cable input. If your cable provider uses the HRC or IRC standard, select that option. Auto search cable Scans all cable channels for valid channels and updates the cable channel guide. Add/Remove cable Selects cable channels to show or hide in the cable channel guide.
5 Fixing Problems Maintaining the TV The TV is designed to require very little maintenance. For best performance, keep the TV clean and replace the lamp module when you see a warning message. Cleaning the TV You can keep the TV clean using the following recommendations. • • • Use the TV in an area that is free from excessive dust and dirt. You cannot clean any of the internal surfaces. Wipe the screen and case with a soft, dry cloth. Do not use water, polish, solvent, or other substances.
1. 2. 3. 4. Turn off the TV and allow it to cool for at least 30 minutes. Unplug the power cord. Open the front access door by pressing in above the HP logo, then releasing. Loosen the two screws 1 on the lamp cover and remove the cover 2. 5. Loosen the three screws 1 on the lamp module; then pull out the module using its handle 2. Fixing Problems Downloaded from www.Manualslib.
6. 7. 8. Insert the new lamp module into the opening, firmly press it into place, and tighten the three screws 1. Insert the tabs on the lamp cover 2 into the openings in the case. Position the cover and tighten the two screws 3. Plug in the power cord and turn on the TV. If the lamp does not turn on after the warm-up period, reinstall the lamp module. Maintaining the TV Downloaded from www.Manualslib.
Troubleshooting If you have a problem with your TV, find the following category that most closely matches the nature of the problem; then look in that section of this chapter: • • • • • • • “Warning Light Problems” on page 60 “Startup Problems” on page 60 “Picture Problems” on page 61 “Channel Problems” on page 62 “Sound Problems” on page 63 “General Problems” on page 64 “Remote Control Problems” on page 64 TIP: If these suggestions do not solve your problem, go to www.hp.
Picture Problems If you see a picture but it is not the one you expect to see • Press Source two times and select the source you want to view. • Label your sources so you can more easily identify them. See “Labeling the Sources” on page 51. • If you cannot find a source connected to a composite-video input on Video 1, 2, or 3, make sure the adjacent S-video input has no cable attached. If a blank picture displays • Press Source two times and select the source you want to watch.
If a scrolling or cut-off image is displayed for a computer connection • Press Settings, go to Picture > Advanced picture > Auto-sync, press OK, and select Yes. • Press Settings, go to Picture > Advanced picture, and adjust V Position and H Position. • Turn everything off. Then power on the TV first and power on the notebook or desktop computer second.
Sound Problems If no sound is coming out of the TV • Be sure you have an audio cable securely connected between the TV and the source device. Check that the audio and video cables connect to the same group of connectors on the TV, such as Component 1. • On the side of the TV, press the volume+ button one or more times to be sure sound is not muted and the volume is not too low. • Press Settings, go to Sound > Advanced sound > Internal speakers, and be sure the speakers are turned on.
General Problems If the TV stops responding to all controls • Try the buttons on the side of the TV. If the TV does not respond, turn off the TV, then unplug the power cord, and wait at least 15 seconds before reconnecting power. • If the buttons on the TV work, but the remote control buttons do not work, see “Remote Control Problems” on page 64. If the lamp shuts off during a show • A minor power surge might cause the lamp to shut off. This is normal. Wait about three minutes; then power on the TV.
Testing the Operation You can use an internal diagnostic test to verify the proper operation of the TV. 1. 2. 3. Turn off the TV. Press the following sequence of six buttons on the remote control: Settings, 999, OK, power. If the TV turns on, the TV is operating properly. If the red warning lights on the front of the TV turn on or start blinking, see “Warning Light Problems” on page 60. Testing the Operation Downloaded from www.Manualslib.
Fixing Problems Downloaded from www.Manualslib.
6 Support and Warranty Support Contacting HP Technical Support HP provides expert advice on using your HP TV and solving problems with your TV. Support options and availability vary by product, country/region, and language. The HP support process works most effectively if you seek assistance in the following order: Step 1: HP TV Documentation Review the owner’s manual and setup guide included with the TV. From our experience, a large percentage of customer issues are addressed in the owner’s manual.
Obtaining Repair Service If your HP TV must be repaired, call HP telephone support. A trained HP service technician will diagnose the problem and coordinate the repair process. HP support will direct you to the best solution, whether it is an authorized service provider or an HP facility. Repair covered by the limited warranty is provided at no additional cost during the limited warranty period. After the warranty period, you will be quoted a repair cost.
Limitations of Liability 1. To the extent allowed by local law, the remedies provided in this Warranty Statement are the customer’s sole and exclusive remedies. 2.
Support and Warranty Downloaded from www.Manualslib.
7 Reference Information This chapter lists the specifications, safety information, and regulatory information for the HP TV. Specifications Because HP continually improves its products, the following specifications are subject to change. For the latest specifications, visit the HP website at www.hpshopping.com. Screen 50, 58, or 65 inches (127, 147, or 165 cm) diagonal size 16:9 widescreen Size 50 inch: 53.0×34.0×17.2 in (134.6×86.4×43.8 cm) 58 inch: 60.0×38.0×19.2 in (152.4×96.5×48.9 cm) 65 inch: 66.
Lamp 150 W 6000-hour average lamp life (to half of original brightness) HP replacement lamp module: L2114A Remote control Universal remote control 6 programmable devices Compatibility: HP TV, HP Digital Entertainment, DVD player, cable box, satellite receiver, audio system, digital video recorder, VCR, HP projector Security V-chip for antenna and cable inputs Parental lock prevents viewing of unapproved content and channels Power 120 V nominal at 50 to 60 Hz 380 watts maximum Environment Operating:
Regulatory Information This section presents information that shows how your TV complies with regulations in certain regions. Any modifications to your TV not expressly approved by HP could void the authority to operate the TV in these regions. U.S.A. This TV has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Reference Information Downloaded from www.Manualslib.
Index A accessories 9 adjusting color 50 picture 49 picture mode 41 settings 50 size 49 slanted picture 41 volume 43 antenna connecting 18 connector 9 audio.
settings, adjusting 50 set-top cable box connecting 20 controlling 40 setup menu 56 side-by-side picture (POP) 45 sound connecting 26 connector 9 controlling 43 menu 54 troubleshooting 63 source menu 54 specifications 71 stand 9 support 67 suspending parental controls 48 S-video connecting 16 connector 9 system setup 11 T technical support 67 temperature warning light 60 testing 65 time and date 33 troubleshooting channels 62 general 64 picture 61 remote control 64 sound 63 startup 60 warning lights 60 tur
Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
© 2005 Hewlett-Packard Development Company, L.P. Printed in Taiwan www.hp.com 5991-0351 Downloaded from www.Manualslib.
