QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Overview HP ProLiant BL685c G6 Server Blade 7. Up to four (4) AMD Opteron™ 8000 series processors 8. Smart Array P400i storage controller (available as an option in factory integrated models) Optional Smart Array P400i battery 9. Two (2) small form factor (SFF) hot-plug hard drive bays Internal USB connector 10. System power button and LED Optional Trusted Platform Module (TPM) 11.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Overview At A Glance This document covers the HP ProLiant BL685c G6 server blade only. For more information on HP BladeSystem c-Class Enclosures and HP BladeSystem c-Class Interconnects, please see the following QuickSpecs: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Overview iSCSI Ethernet mezzanine option for optimized iSCSI connectivity Ethernet server adapter mezzanine options for additional network ports 4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on Mellanox technology) Internal Media Support: Support One (1) internal USB 2.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Overview Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Processor Six-Core Processors AMD Opteron™ processor Model 8435 (2.6 GHz, 6 MB L3 Cache, 75W ACP) AMD Opteron processor Model 8431 (2.4 GHz, 6 MB L3 Cache, 75W ACP) Quad-Core Processors AMD Opteron processor Model 8389 (2.9 GHz, 6 MB L3 Cache, 75W ACP) AMD Opteron processor Model 8387 (2.8 GHz, 6 MB L3 Cache, 75W ACP) Low Power AMD Opteron processor Model 8381 HE (2.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Integrated Manageability ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor) Storage Controller HP Smart Array P400i 512MB memory module supports RAID 0,1 Controller Available upgrades: Battery-backed write cache option NOTE: The HP Smart Array P400i controller is required for all blades that support hot plug hard disk drives.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature: Optimal performance utilizing PCI Express 4/2/1Gb/s auto negotiating speeds (4Gb HBAs) 8/4/2Gb/s auto negotiation speeds (8Gb HBAs) Dual-ports for redundant path connections Up to two FC HBAs per server blade providing redundant FC HBA support Optimized for HP StorageWorks and supported by third party SAN vendors Support for Microsoft® Windows® and Linux o
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features free 30 day evaluation license for 8 servers (default option for every enclosure order), a full purchased license for 8 blade servers or a full purchased license for 16 blade servers). For additional information on HP c-Class Infrastructure please visit: HP BladeSystem c-Class Enclosures QuickSpecs: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Manager (SIM) and virtualization for broad decision-making support. A variety metrics are available for monitoring, assessment, thresholds, alerts, and action - and allow user-customization.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Server Management Stand Alone Software Products HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms. For additional information, please see: http://www.hp.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features HP Insight Vulnerability and Patch Manager module iLO Advanced for BladeSystem Core Infrastructure Management HP ProLiant Essentials Foundation Pack HP Insight Vulnerability and Patch Manager module (offered exclusively through the Insight Control suites) - identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and o
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Insight Management Agents (SNMP) For additional information about the Management Providers please visit http://www.hp.com/go/HPwbem The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Supported Virtual Machines SG/LX in HP Integrity Virtual Machines guests SG/LX in VMware ESX guests SG/LX in Red Hat and SUSE Xen hosts (DOM0) Application Integration Toolkits HP Serivceguard for Linux Oracle Database Toolkit HP Serviceguard Extension for SAP on Linux (SGeSAP/LX) Free Application Integration Toolkits: Apache MySQL NFS PostgreSQL Samba Tomcat Sendmail Disaster Tolerant Solutions HP Serviceguard for Linux Extende
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features Availability Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection Two (2) embedded dual-port 10Gb Ethernet adapters for redundant LAN connections Two (2) hot-plug SAS/SATA hard drive bays and integrated RAID (Smart Array P400i) controller (Batterybacked write cache is optional.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Standard Features HP Enterprise Configurator The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Models Six-Core Models HP ProLiant BL685c G6 8435 6C, 8G (2P) 539815-B21 HP ProLiant BL685c G6 8431 6C, 8G (2P) 539818-B21 Processor(s) Cache Memory Memory Network Adapter Storage Controller Hard Drives Internal Storage Optical Drive Form Factor (2) AMD Opteron™ processor Model 8435 (2.6 GHz) (2) AMD Opteron processor Model 8431 (2.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Configuration Information - Factory Integrated Models NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the banks furthest away from each processor. NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz with eight (8) DIMMs per processor.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Core Options Ethernet Mezzanine Options Gigabit Ethernet Mezzanines HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem HP NC360m Dual Port 1GbE BL-c Adapter HP NC364m Quad Port 1GbE BL-c Adapter HP NC382m Dual Port 1GbE Multifunction BL-c Adapter QLogic QMH4062 1GbE iSCSI Adapter for HP BladeSystem c-Class NOTE: The Gigabit Ethernet adapters trans
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Core Options Processors AMD Opteron™ processor Model 8435 (2.6 GHz, 6 MB L3 Cache, 75W ACP) Processor Option Kit AMD Opteron processor Model 8431 (2.4 GHz, 6 MB L3 Cache, 75W ACP) Processor Option Kit AMD Opteron processor Model 8389 (2.9 GHz, 6 MB L3 Cache, 75W ACP) Processor Option Kit AMD Opteron processor Model 8387 (2.8 GHz, 6 MB L3 Cache, 75W ACP) Processor Option Kit Low Power AMD Opteron processor Model 8381 HE (2.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Core Options NOTE: SAS drives have a 3 year warranty. NOTE: Please see the for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) SATA SFF Hot Plug Entry (ETY) Drives HP 250GB 3G SATA 5.4K SFF ETY HDD HP 120GB 1.5G SATA 5.4K SFF ETY HDD NOTE: SATA drives have a 1 year warranty.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Additional Options HP Insight Control suite (ICE) NOTE: Electronic licensing options are available for select Insight Software products. Please see the appropriate Insight Software QuickSpecs for additional information. HP Insight Control suite HP Insight Control suite, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: Contains 1 license for each of RDP, PMP, VMM, VPM, IPM and iLO Advanced.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Additional Options entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. NOTE: This license formerly known as ProLiant Essentials Rapid Deployment Pack. NOTE: For additional license kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Additional Options Featuring: Sophisticated remote control and security features for HP BladeSystem servers and ProLiant BL servers in text console environments. NOTE: For additional license kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Additional Options Storage Controller HP Smart Array P700m/512 Controller HP Smart Array P700m/256 Controller HP Smart Array P700m/512 Battery Option Kit NOTE: The Smart Array battery option kit is required to enable battery-backed write cache (BBWC). NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at: http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Additional Options HP PCI Expansion Blade HP PCI Expansion Blade NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation. NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at: http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Additional Options USB Options HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver) Service and Support Offerings (HP Care Pack Services) NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Memory NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DIMM installation guidelines: guidelines 1. 2. 3. 4. 5. All DIMMs must be PC2-5300 Registered DDR2 DIMMs (667 MHz) or PC2-6400 Registered DDR2 DIMMs (800 MHz). Both DIMM slots in a memory bank must be populated. Banks must be populated in sequential alphabetic order, starting with bank A. Both DIMMs in a memory bank must be identical.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Memory 25M 8192 MB 26M 8192 MB 27N 8192 MB 28N 8192 MB 29O 8192 MB 30O 8192 MB 31P 8192 MB Following are memory options available from HP: 2 GB REG PC2-6400 DDR2 2 x 1 GB Kit 4 GB REG PC2-6400 DDR2 2 x 2 GB Kit 8 GB REG PC2-6400 DDR2 2 x 4 GB Kit 8 GB REG PC2-6400 DDR2 2 x 4 GB Low Power Kit 16 GB REG PC2-5300 DDR2 2 x 8 GB Dual Rank Kit 64 GB REG PC2-5300 DDR2 8 x 8 GB Dual Rank Kit 32P 8192 MB 497763-B21 497765-B21 497767-B21 504351-B
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Storage 1-2 2 x SFF SAS or SATA Hot Plug Hard Drives Hard Drives NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. NOTE: Simultaneous operation of hot plug hard drives and solid state drives is not supported.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Technical Specifications System Unit Dimensions (H x W x D) Weight (approximate) Power Specifications 14.42 x 2.19 x 20.058 (36.63 x 2.19 x 50.95 cm) Maximum 22.8 lbs (10.3 kg) (all hard drives and processors installed) Minimum 20.82 lbs (9.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Technical Specifications Enclosures QuickSpecs located at: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/ 12790_div.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/ 12810_div.html HP Smart Array P400i Controller Disk Drive and Enclosure 3G SAS (Serial Attached SCSI) Interface 1.
QuickSpecs HP ProLiant BL685c Generation 6 (G6) Server Blade Technical Specifications Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.
