QuickSpecs HP ProLiant BL460c Server Blade Overview HP ProLiant BL460c Server Blade 5. Eight (8) PC2-5300, Fully Buffered DIMMs (DDR2-667) Memory Slots 2. Up to two Quad-Core or Dual-Core Intel® Xeon® 5000 6. HP Smart Array E200i Controller (optional battery-backed sequence processors write cache) (standard BTO models) 3. Small form factor (SFF) hot-plug drive bays (standard 7. Two Mezzanine slots BTO models) 4. Local I/O connector 8. Internal USB Connector (standard BTO models) 1.
QuickSpecs HP ProLiant BL460c Server Blade Overview HP ProLiant BL460c server blade includes: Processor: Up to two Quad-Core Intel® Xeon® 5400 sequence processors Up to two Quad-Core Intel® Xeon® 5300 sequence processors Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.
QuickSpecs HP ProLiant BL460c Server Blade Overview HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter HP NC512m Dual Port 10GbE Multifunction BL-c Adapter 4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on Mellanox technology Internal USB Support: One (1) internal USB 2.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/erc/downloads/4AA0-6087enw.pdf. Processor Quad-Core Processor Option Kits Quad-Core Intel® Xeon® Processor X5460 (3.160 GHz, 1333 FSB, 120W)* Quad-Core Intel® Xeon® Processor X5450 (3.00 GHz, 1333 FSB, 120W)* Quad-Core Intel® Xeon® Processor E5450 (3.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Cache Memory 2 x 6 MB shared L2 cache (5400 Sequence) 1 x 6 MB L2 cache (5200 Sequence) 2 x 4 MB Level 2 cache memory (5300 Sequence 1 x 4 MB Level 2 cache memory (5100 Sequence) Chipset Intel® 5000P Chipset Memory Type Standard Maximum Network Controller PC2-5300 Fully Buffered DIMMs at 667 MHz 1 GB (2 x 512 MB) 2 GB (2 x 1 GB) 64 GB (8 x 8 GB) NOTE: Memory must be installed in pairs.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Multifunction Networking The embedded multifunction NC373i combines standard Gigabit Ethernet networking, TCP/IP offload engine (TOE) for Microsoft Windows and Linux iSCSI boot capability into a single adapter. TOE moves the processing of data in the TCP protocol stack from the server CPU to the network card, freeing CPU cycles for other activities. With TOE, network communications are improved, and server efficiency is increased.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Fibre Channel Support Two optional Fibre Channel HBAs are supported by the HP ProLiant BL460c. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits and must be ordered separately.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Insight Control Insight Control Environment for BladeSystem delivers foundation management for HP Management Suites for BladeSystem lifecycles, including hardware resource deployment, health monitoring, software BladeSystem version control, performance monitoring, vulnerability, scanning and patch management and power management.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Integrated Lights-Out Advanced Pack Upgrades the iLO 2 processor with comprehensive remote control including Virtual KVM remote graphical console, enhanced console sharing and replay, virtual media (floppy, CD/DVD, USB key), virtual folders, and enterprise security (directory services and two-factor authentication).
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Core Infrastructure Management Virtual Machine Management Pack Virtual Machine Management Pack – provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console. NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features HP Serviceguard for Linux (SGLX) HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features OS Support Microsoft Windows 2000 Server Microsoft Windows 2000 Advanced Server Microsoft Windows Server 2003, Standard Edition Microsoft Windows Server 2003 R2, Standard Edition Microsoft Windows Server 2003, Standard x64 Edition Microsoft Windows Server 2003 R2, Standard x64 Edition Microsoft Windows Server 2003, Web Edition Microsoft Windows Server 2003 R2, Web Edition Microsoft Windows Server 2003, Enterprise Edition Microsoft Windows Serve
QuickSpecs HP ProLiant BL460c Server Blade Standard Features Availability Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection Two (2) embedded Gigabit Ethernet adapters for redundant LAN connections Two (2) hotplug SAS/SATA hard drive bays and integrated RAID (HP Smart Array E200i) controller on every BTO model server blade (Battery-backed write cache is optional.
QuickSpecs HP ProLiant BL460c Server Blade Standard Features HP Enterprise Configurator The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
QuickSpecs HP ProLiant BL460c Server Blade Models Quad-Core Models HP ProLiant BL460c E5450 2G (1P) 459483-B21 Processor(s) One of the following depending on model (1) Quad-Core Intel® Xeon® Processor E5450 (3.00 GHz, 1333 FSB, 80W) (1) Quad-Core Intel® Xeon® Processor E5440 (2.83 GHz, 1333 FSB, 80W) (1) Quad-Core Intel® Xeon® Processor E5430 (2.66 GHz, 1333 FSB, 80W) (1) Quad-Core Intel® Xeon® Processor E5420 (2.50 GHz, 1333 FSB, 80W) (1) Quad-Core Intel® Xeon® Processor L5420 (2.
QuickSpecs HP ProLiant BL460c Server Blade Models L5320 2G (1P) 443751-B21 Form Factor HP ProLiant BL460c E5310 1G (1P) 435456-B21 Up to 8 half-height blades supported in HP BladeSystem c3000 Enclosure Up to 16 half-height blades supported in HP BladeSystem c7000 Enclosure Dual-Core Models HP ProLiant BL460c X5260 2G, (1P) 461603-B21 Processor(s) One of the following depending on model HP ProLiant BL460c L5240 2G, (1P) 461604-B21 HP ProLiant BL460c E5205 1G, (1P) 461605-B21 HP ProLiant BL460c X5160
QuickSpecs HP ProLiant BL460c Server Blade Smart Buy The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only. For a full listing of ProLiant Smart Buys available for all server families, visit http://www.hp.
QuickSpecs HP ProLiant BL460c Server Blade Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant BL460c Server Blade Configuration Information - Factory Integrated Models Memory Quad-Core Intel® Xeon® processor L5335 (2.00 GHz, 1333 FSB, 50 W) Option Kit, FIO Base Quad-Core Intel® Xeon® Processor E5320 (1.86GHz, 1066 FSB, 80 W) Option Kit, FIO Base Quad-Core Intel® Xeon® Processor L5320 (1.86 GHz, 1066 FSB, 80 W) Option Kit, FIO Base Quad-Core Intel® Xeon® Processor E5310 (1.
QuickSpecs HP ProLiant BL460c Server Blade Configuration Information - Factory Integrated Models Step 3: Choose Additional Factory Integratable Options VMware ESX Server 3i VMware ESX Server 3i 2P integrated hypervisor integrated hypervisor VMware ESX Server 3i VI3 Enterprise 2P integrated hypervisor NOTE: For additional information and option kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12307_na/12307_na.
QuickSpecs HP ProLiant BL460c Server Blade Options Ethernet Mezzanine Options HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem NOTE: The NC325m Server Adapter must be installed in Mezzanine Slot 2 of a half-height server blade to provide connectivity on all 4 ports. If installed in Mezzanine Slot 1 of a half-height server blade, the NC325m Server Adapter will provide connectivity on 2 of the 4 ports.
QuickSpecs HP ProLiant BL460c Server Blade Options HP PCI Expansion Blade HP PCI Expansion Blade NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe connect board which requires installation. NOTE: Please see the HP PCI Expansion Blade QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.
QuickSpecs HP ProLiant BL460c Server Blade Options may be downloaded at no cost from: http://www.hp.com/go/ice-linux (click on Download button). NOTE: For additional HP Insight Control Linux Edition License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.
QuickSpecs HP ProLiant BL460c Server Blade Options virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
QuickSpecs HP ProLiant BL460c Server Blade Options Processors Quad-Core Process Option Kits Quad-Core Intel® Xeon® Processor X5460 (3.16 GHz, 1333 FSB, 120 W) Quad-Core Intel® Xeon® processor X5450 (3.00GHz 1333 FSB, 120 W) Quad-Core Intel® Xeon® processor E5450 (3.00GHz 1333 FSB, 80 W) Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 1333 FSB, 80 W) Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 1333 FSB, 80 W) Quad-Core Intel® Xeon® processor E5420 (2.
QuickSpecs HP ProLiant BL460c Server Blade Options Memory 1 GB FBD PC2-5300 2 x 512 MB Kit 2 GB FBD PC2-5300 2 x 1 GB Low Power Kit 2 GB FBD PC2-5300 2 x 1 GB Kit 4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 4 GB FBD PC2-5300 2 x 2 GB Kit 8 GB FBD PC2-5300 2 x 4 GB Kit 8GB FBD PC2-5300 2 x 4 GB Low Power Kit 16 GB FBD PC2-5300 2x8 GB Kit NOTE: Memory Option Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://h18004.www1.hp.
QuickSpecs HP ProLiant BL460c Server Blade Options High Availability Cluster Options HP Serviceguard Linux x86 Server License & Media including One Year 24x7 Software Support & Updates HP Serviceguard Linux Oracle Single Instance Database Toolkit x86 Cluster License & Media including One Year 24x7 Software Support & Update HP Serviceguard Linux Extension for SAP (SGeSAP/LX) x86 Server License & Media including One Year 24x7 Software Support & Updates HP Serviceguard Linux Extended Distance Cluster (XDC)
QuickSpecs HP ProLiant BL460c Server Blade Memory NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DIMM installation guidelines: 1. 2. 3. 4. All DIMMs must be PC2-5300 Fully Buffered DIMMs at 667 MHz. Both DIMM slots in a memory bank must be populated. Banks must be populated in sequential alphabetic order, starting with bank A. Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1, bank A. 5.
QuickSpecs HP ProLiant BL460c Server Blade Storage 1-2 2 x SFF SAS or SATA Hot Plug Hard Drives Hard Drives SAS Hard Drive 72 GB 15,000 rpm SAS 36 GB 15,000 rpm SAS 146 GB 10,000 rpm SAS 72 GB 10,000 rpm SAS Quantity Supported Position Supported 2 1-2 Controller HP Smart Array E200i Controller Serial-ATA (SATA) Hard Drive Quantity Position Supported Supported Controller 120 GB 5,400 rpm SATA 2 1-2 HP Smart Array E200i Controller 60 GB 5,400 rpm SATA NOTE: This option is not supported or available
QuickSpecs HP ProLiant BL460c Server Blade Storage External Storage Quantity Position Supported Supported Host Controller or Adapter XP Disk Array Systems Please see the External Please see the XP Disk Array Systems Quick Specs for the XP Disk Array latest list of supported HBAs Systems QuickSpecs below to determine configuration requirements HP StorageWorks XP10000 Disk Array: http://h18006.www1.hp.com/products/storageworks/xp10000/index.
QuickSpecs HP ProLiant BL460c Server Blade Technical Specifications System Unit Dimensions (H x W x D) 7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm) (with bezel) Weight Maximum 14.20 lb (6.44 kg) (approximate) (all hard drives and processors installed) Minimum 10.75 lb (4.
QuickSpecs HP ProLiant BL460c Server Blade Technical Specifications HP Smart Array E200i Controller Disk Drive and Enclosure Interface 3G SAS (Serial Attached SCSI) 1.5G SATA (Serial Advanced Technology Attachment) Cache Memory Speed DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth. Server Interface x4 2.5G PCIe provides 2GB/s maximum bandwidth. SAS Speed x2 3G SAS provides 600MB/s maximum bandwidth.
QuickSpecs HP ProLiant BL460c Server Blade Technical Specifications Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.
