Front View: 1. Eight sockets for PC2-5300 Fully Buffered DIMMs (DDR2-667) 2. Hot-plug fans, full redundancy 3. Systems Insight Display 4. Quick release lever for rapid server access 5. Support for eight Small Form Factor hot plug hard drives bays 6. Front LEDs (show server status) and Unit Identification button/LED (for easy in rack server identification) 7. 8. 9. 10. 11. Rear View: 1. Torx service tool 2. 3. 4. 5. 6. Two front USB ports (2 rear USB ports, 1 internal USB 7.
At A Glance The HP ProLiant DL380, the world's best selling server, delivers on its history of design excellence with enterprise-class uptime and manageability, proven 2-way Intel® Xeon® performance, and 2U density for a variety of rack deployments and applications.
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/5983-0605EN.pdf. NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section. Processor Quad-Core Intel® Xeon® Processor X5460 (3.
Memory Type PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving available (interleaving requires identical DIMMs) 1 GB (2 x 512 MB) Standard (Entry Models) Standard 2 GB (2 x 1 GB) (Base Models) Standard 4 GB (4 x 1 GB) (Performance Models) Maximum 32 GB (8 x 4 GB) NOTE: Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at 667 MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will run at 533 MHz.
Storage Controller One of the following depending on Model Performance Models: Base Models: Entry Models: Storage Maximum Internal Storage HP Smart Array P400/512MB BBWC Controller (RAID 0/1/1+0/5/6) HP Smart Array P400/256MB Controller (RAID 0/1/1+0/5) Available upgrades: 512MB battery-backed write cache (BBWC) or standalone battery for RAID 0/1/1+0/5/6 HP Smart Array E200/64MB Controller (RAID 0/1/1+0) Available upgrades: 128MB battery-backed write cache (BBWC) for RAID 0/1/1+0/5 Diskette Drive Opti
Interfaces Graphics Serial Pointing Device (Mouse) Graphics Keyboard VGA Network RJ-45 iLO 2 remote management port USB 2.0 Ports 1 1 1 1 2 (1 front, 1 back) 2 1 5 total: 2 front, 2 back, 1 internal NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html.
Server Management HP Systems Insight Stand Alone Software Manager Product - ProLiant Essentials ProLiant Essentials Rapid Deployment Pack ProLiant Essentials Server Migration Pack Universal Edition HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
Core Infrastructure Management SmartStart Insight Management Agents SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at: http://www.hp.com/servers/smartstart. SmartStart version supported (minimum): SmartStart 7.
System Fans Fully redundant hot plug fans ship standard (N+1). OS Support Microsoft Windows Server 2000 Microsoft Windows Server 2003 Microsoft Windows Small Business Server 2003, R2 Microsoft Windows Server 2008 Novell NetWare Red Hat Enterprise Linux SUSE Linux Enterprise Server SCO UnixWare, OpenServer VMware Virtualization Software Solaris 10 32/64-bit NOTE: For more complete and up-to-date information on how to buy server operating systems from HP please visit the OS product site at: http://h18004.
Telco Rack Support DL380 G5 Telco Rack Kit: Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions: http://www.racksolutions.com/hp/. Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL380 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section. HP DL380 G5 Processor(s) (2) Quad-Core Intel® Xeon® X5460 Processors (3.16 GHz, 120 Watt, Performance Models Two of the following 1333 FSB) depending on Model (2) Quad-Core Intel® Xeon® X5450 Processors (3.00 GHz, 120 Watt, Quad-Core Models 1333 FSB) HP DL380G5 X5460 4G (2) Quad-Core Intel® Xeon® E5345 Processors (2.
HP DL380 G5 Entry Models Form Factor Availability Rack (2U), Height 3.38-inch/8.59cm; Depth: 26 inches (66 cm) Hot Plug Fully Redundant Fans Standard Processor(s) One of the following depending on Model Network Controller Storage Controller Hard Drive Internal Storage Optical Drive (1) Quad-Core Intel® Xeon® E5405 Processor (2.0 GHz, 80 Watt, 1333 FSB) (1) Quad-Core Intel® Xeon® E5310 Processor (1.60 GHz, 80 Watt, 1066 FSB) (1) Dual-Core Intel® Xeon® 5120 Processor (1.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.
Base Memory Quad-Core Intel® Xeon® Processor X5355 (2.66 GHz , 120 Watts, 1333 FSB) DL380 G5 FIO Kit Quad-Core Intel® Xeon® Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 FIO Kit Quad-Core Intel® Xeon® Processor E5335 (2.00 GHz, 80 Watts, 1333 FSB) DL380 G5 FIO Kit Quad-Core Intel® Xeon® Processor E5320 (1.86 GHz, 80 Watts, 1066 FSB) DL380 G5 FIO Kit Quad-Core Intel® Xeon® Processor L5320 (1.86 GHz, 50 Watts, 1066 FSB) DL380 G5 FIO Kit Quad-Core Intel® Xeon® Processor E5310 (1.
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information. HP ProLiant DL380 G5 Mixed Riser Cage Option Kit (PCI-E/PCI-X) 410570-B21 Unique Options HP Insight Control Management Suites NOTE: Electronic licensing options are available for Insight Control suites software products. Please see the appropriate Insight Control QuickSpecs for additional information.
Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
ProLiant Software Maintenance Subscription ProLiant Software Maintenance Single Release NOTE: Please see the SmartStart QuickSpecs for additional information regarding the subscription purchase: http://h18000.www1.hp.com/products/quickspecs/division/11073.html (Worldwide) 356573-B21 Processors Quad-Core Inte®l Xeon® Processor X5460 (3.16 GHz, 120 Watts, 1333 FSB) Quad-Core Intel® Xeon® Processor X5450 (3.0 GHz, 120 Watts, 1333 FSB) Quad-Core Intel® Xeon® Processor E5450 (3.
Hard Drives Storage Controllers Hot Plug SFF SAS 2.
http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html (Smart Array P400 Controller) http://h18000.www1.hp.com/products/quickspecs/12247_div/12247_div.html (Smart Array P600 Controller) http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html (Smart Array P800 Controller) SAS HBA HP SC44Ge Host Bus Adapter HP 8 Internal Port SAS HBA with RAID NOTE: Please see the following QuickSpecs for additional information: http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.
HPC Specific Options HP IB 4X DDR PCI-e Dual Port HCA HP IB 4X DDR PCI-e single PORT HCA HP IB 4X SDR PCI-e single PORT HCA HP IB 4X DDR Conn-X PCI-e Dual Port HCA 409376-B21 431039-B21 431038-B21 448397-B21 Redundant Options Redundant Power Supply 350/370/380 G5 AU Kit Redundant Power Supply 350/370/380 G5 EU Kit Redundant Power Supply 350/370/380 G5 JP Kit Redundant Power Supply 350/370/380 G5 Worldwide Kit Redundant Power Supply 350/370/380 G5 UK Kit Redundant Power Supply 350/370/380 G5 US Kit Redun
(Worldwide) http://h18006.www1.hp.com/products/quickspecs/12128_div/12128_div.html (Worldwide) For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect.
Tape Autoloaders Tape Libraries HP StorageWorks DAT Autoloader HP StorageWorks DAT 72x10 tape autoloader HP StorageWorks 1/8 Tape Autoloader HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader HP StorageWorks 1/8 LTO-3 Ultrium 920 G2 Tape Autoloader HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader HP StorageWorks 1/8 LTO-2 Ultrium 448 G2 Tape Autoloader HP StorageWorks 1/8 LTO-1 Ultrium 232 G2 Tape Autoloader HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit NOTE: Required to install the 1/
NOTE: Please reference the MSL2024, MSL4048, MSL8096 and MSL6000 Tape Library QuickSpecs at: http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs. Cluster Options ProLiant Cluster Starter Kit NOTE: For additional information regarding the ProLiant Cluster Starter Kit please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11935_div/11935_div.
HP StorageWorks Modular Smart Array 30 HP StorageWorks Modular Smart Array 30 SB NOTE: Rack-mountable 14 drive enclosure with single bus, redundant power supplies HP StorageWorks Modular Smart Array 30 DB NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant power supplies NOTE: Please see the Modular Smart Array 30 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.
Uninterruptible Power HP R1.5 VA 1U UPS INTL Systems - Rack HP R1.5 VA 1U UPS JPN HP R1.5 VA 1U UPS NA HP R/T2200 2-U ERM AF418A AF421A AF419A AF412A HP Monitored Power HP Monitored Power Distribution Unit: Full Rack Version Distribution Unit (PDU) 17.3 kVA Monitored PDU Model S2324 8.6 kVA Monitored PDU Model S1324 16.6 kVA Monitored PDU Model S2140 8.3 kVA Monitored PDU Model S1140 22 kVA Monitored PDU Model S2316 11 kVA Monitored PDU Model S1316 14.7 kVA Monitored PDU Model S2132 7.
HP Rack 10000 Series HP S10614 (14U) Rack Cabinet - Shock Pallet (Graphite Metallic) NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels). NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment installed. Not all Compaq equipment is qualified to be shipped in the Rack 10000 series. NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.
HP KVM Switch Options 2x1x16 IP Console Switch with Virtual Media 4x1x16 IP Console Switch with Virtual Media 2x16 Server Console Switch with Virtual Media PS/2 Virtual Media Interface Adapter, 1 pack NOTE: Requires PS/2 and one USB port on server.
Onsite HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic NOTE: For more information, customer/resellers can contact: http://www.hp.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 2 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (2 x 1 GB) Upgrading Memory and Memory Interleaving When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B, DIMMs 5C and 6C, and DIMMs 7D and 8D must match and must be installed as a pair. When DIMMs 1A and 2A are populated the system is automatically configured for 2:1 interleaving.
Online spare memory configuration Online spare FBDIMM configuration requirements (in addition to general configuration requirements): When only bank A is being used, it must be fully populated with dual-rank FBDIMMs. If banks A and C are being used, they must be fully populated. If installed, bank A and bank C must contain FBDIMMs with identical part numbers. If installed, bank B and bank D must also contain FBDIMMs with identical part numbers.
1-8 Eight SFF SAS hot plug hard drive bays Drive Support Quantity Supported Position Supported Removable Media 1.44-MB Diskette Drive Only 1 available Slimline bay removable media bay Slimline CD-RW/DVDOnly 1 available Slimline bay ROM Combo Option Kit removable NOTE: Included in media bay performance models.
External Storage Modular Smart Array 20 Family Modular Smart Array 30 Family Modular Smart Array 50 Enclosure Modular Smart Array 60 Enclosure Modular Smart Array 70 Enclosure Modular Smart Array 500 G2 Modular Smart Array 1000 Modular Smart Array 1500 cs Quantity Supported 1 per SCSI VHDCI connector Up to 4 Up to 2 Up to 4 2 per connector (supports 1+1 cascading) Up to 8 Up to 4 Up to 8 Up to 4 Up to 2 Up to 4 1 per SCSI Position Supported External Please see the QuickSpecs to determine configuration
LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-2 Ultrium 460 LTO-3 Ultrium 960 LTO-3 Ultrium 920 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 DLT VS160 SDLT 600 1U Rack-Mount Kit 3U Rack-Mount Kit HP StorageWorks USB Tape Drives, External DAT 40 USB DAT 72 USB DAT 160 USB 1U Rack-Mount Kit External USB 2.
MSL6000 HP StorageWorks D2D Backup Systems D2D110 D2D120 D2D130 External Embedded Network Controller DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008 N/A Page 35
Power Supply Specification - AC Part number Spare Kit Operational Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms) 100 Max Rated Output Wattage Rating 800 Nominal Input Current (A rms) 10.0 Max Rated Input Wattage Rating 980 (Watts) Max. Rated VA (Volt-Amp) 1000 Efficiency (%) 81.5 Power Factor 0.98 Leakage Current (mA) 0.44 Max. Inrush Current (A peak) 30 Max.
System Unit Dimensions (H x W x D) 3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm) (with bezel) Weight (approximate) Maximum 60 lb (27.22 kg) (all hard drives, power supply, and processor installed) Minimum 47.18 lb (20.41 kg) (one hard drive, power supply, and processor installed) Input Requirements Rated Line Voltage 100 - 132 VAC, (per power supply) 200 - 240 VAC Rated Input Current 10A (at 100 VAC) 9A (at 120 VAC) 6.
Smart Array P400 Controller Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle LWAd 6.1 B LpAm 44 dBA Operating LWAd 6.1 B LpAm 44 dBA Disk Drive and Enclosure Interface 3G SAS (Serial Attached SCSI) 1.
Two Embedded NC373i Network Interface Multifunction Server Compatibility Adapters 10Base-T/100Base-TX/1000Base-TX IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.
