User's Manual

The following information is listed for each session:
• User—The login name used to log in to the session.
• IP—The IP address of the computer used to log in to the session.
• Login Time—The date and time that the session started.
• Access Time—The date and time that the Moonshot 1500 CM module was last accessed by
the listed session.
• Expires—The date and time that the session will expire.
• Source—The method used to initiate the session (for example, web interface or SSH).
• Permissions (Current Session only)—The enabled privileges for the current session user account.
For information about user privileges, see “Managing iLO CM firmware user accounts” (page
41).
Disconnecting iLO CM firmware sessions
The iLO CM Firmware deletes idle sessions if the session timeout setting is configured. The
default value is 30 minutes.
For information about setting the session timeout value, see the HP Moonshot iLO Chassis
Management CLI User Guide.
To disconnect an iLO CM firmware session:
1. From the main menu, select Active Sessions.
The Active Sessions page opens.
2. In the All Sessions section, select the check box next to the session you want to disconnect.
The current session is displayed in bold text.
3. Click Disconnect Session.
If you selected the current session, the following message appears:
You have selected your current Web UI session. Disconnecting this
session will force a logout of this browser window. Are you sure
you want to disconnect your current session?
Viewing overview information 37