Specifications

Removal and Replacement Procedures
Air Baffle
To remove the air baffle:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Open the bezel door. Refer to “Bezel Door (Tower Model Only)” earlier in this chapter.
3. Remove the access panel. Refer to “Access Panel” earlier in this chapter.
4. Loosen the thumbscrew (1) and remove the PCI card retainer.
5. Loosen the thumbscrew that secures the air baffle to the server chassis (2).
6. Lift the air baffle out of the server (3).
2
1
3
Figure 2-12: Removing the air baffle
To replace the air baffle, reverse steps 2 through 6.
HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide 2-15