Specifications

Removal and Replacement Procedures
To remove the front I/O system fan module:
1. Disconnect the I/O fan cable from the system board (2). Refer to Figure 2-13.
1
2
Figure 2-15: Removing the system I/O fan module
2. Loosen the thumbscrew securing the I/O fan module to the chassis (1).
3. Carefully lift the I/O fan module out and away from the chassis (2).
To replace the I/O fan module, reverse steps 1 through 3.
2-18 HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide