Specifications
Table Of Contents
- HP ProLiant ML350 Generation 4 Server Maintenance and Service Guide
- Notice
- Contents
- Illustrated parts catalog
- Removal and replacement procedures
- Required Tools
- Safety considerations
- Preparation procedures
- Removing tower feet
- Removing the front bezel (tower model)
- Rack rails
- Removing the power supply blank
- Hot-plug power supply
- Non-hot-plug power supply
- Hot-Plug Power Supply Backplane
- Removing a hard drive blank
- Hot-Plug SCSI Hard Drive
- Non-hot-plug SCSI hard drive
- Redundant system fan
- Expansion Slot Cover
- Expansion board
- CD-ROM drive
- Tape drive
- Internal two-bay hot-plug SCSI drive cage
- Processor and Heatsink
- PPM
- Second serial port
- Duplex SCSI backplane
- Battery
- System Board
- Re-entering the server serial number and product ID
- Diagnostic tools
- Server component identification
- Specifications
- Acronyms and abbreviations
- Index
Server component identification 40
System Board Components
NOTE: PPM 1 is embedded onto the system board.
Item Description Item Description
1 Power supply connectors 15 64-bit 133-MHz PCI-X slot, bus 6
2 CPU 1 heatsink header 16 64-bit 100-MHz PCI-X slot, bus 9
3 Processor socket 1 17 64-bit 100-MHz PCI-X slot, bus 9
4 Processor socket 2 18 NMI jumper
5 Diskette drive connector 19 PCI Express x8 slot (full length card)
6
Primary IDE connector (ATAPI
devices)
20 PCI Express x4 slot (half length card)
7 CPU 2 heatsink header 21 System battery
8 Power button/LED connector 22 Redundant system fan header
9 Primary SCSI connector* 23 Rear fan connector
10 Secondary SCSI connector* 24 Serial port header
11 PPM 2 socket 25 DIMM slot 4
12 RILOE II connector (30-pin) 26 DIMM slot 3
13 System maintenance switch 27 DIMM slot 2
14 64-bit 66-MHz PCI-X slot, bus 2 28 DIMM slot 1
*For SCSI models only