Specifications
Table Of Contents
- HP ProLiant ML350 Generation 4 Server Maintenance and Service Guide
- Notice
- Contents
- Illustrated parts catalog
- Removal and replacement procedures
- Required Tools
- Safety considerations
- Preparation procedures
- Removing tower feet
- Removing the front bezel (tower model)
- Rack rails
- Removing the power supply blank
- Hot-plug power supply
- Non-hot-plug power supply
- Hot-Plug Power Supply Backplane
- Removing a hard drive blank
- Hot-Plug SCSI Hard Drive
- Non-hot-plug SCSI hard drive
- Redundant system fan
- Expansion Slot Cover
- Expansion board
- CD-ROM drive
- Tape drive
- Internal two-bay hot-plug SCSI drive cage
- Processor and Heatsink
- PPM
- Second serial port
- Duplex SCSI backplane
- Battery
- System Board
- Re-entering the server serial number and product ID
- Diagnostic tools
- Server component identification
- Specifications
- Acronyms and abbreviations
- Index
Specifications 46
Specifications
In this section
Server Specifications .............................................................................................................................. 46
Environmental specifications.................................................................................................................... 47
Rack server specifications........................................................................................................................ 47
Hot-plug power supply calculations .......................................................................................................... 48
DDR SDRAM DIMM specifications............................................................................................................ 48
1.44-MB diskette drive specifications........................................................................................................ 48
CD-ROM drive specifications ................................................................................................................... 49
Server Specifications
Specification Value
Dimensions
Height (with feet) 46.8 cm (18.43 in)
Depth (with bezel) 64 cm (25.2in)
Width 22 cm (8.66 in)
Weight (no drives installed) 27.22 kg (60 lb)
Models with a redundant
power supply
Input requirements
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 47 Hz to 63 Hz
Rated input current 10 A (110 V) to 5 A (220 V)
Rated input power 893 W
BTUs per hour 3049
Power supply output
Rated steady-state power 725 W
Maximum peak power 725 W
Models with a Non-
redundant power supply
Input requirements
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 47 Hz to 63 Hz
Rated input current 7.8 A (110 V) to 3.9 A (220 V)
Rated input power 710 W
BTUs per hour 2425
Power supply output