Specifications

Removal and Replacement Procedures
Extending the Server from the Rack
To extend the server from the rack:
1. Loosen the thumbscrews that secure the front bezel to the front of the rack (1).
2. Extend the server on the sliding rack rails until the spring-load rail lock engages (2).
Figure 2-1: Extending the server from the rack
WARNING: To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the server into or out of the rack. The sliding rails could
pinch your fingertips.
After performing the installation or maintenance procedure:
1. Press the tabs on the ends of both sliding server rails and slide the server back into the
rack.
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide 2-5
HP CONFIDENTIAL Codename: Plucky Duck Part Number: 281778-004 Last Saved On: 7/9/03 9:19 AM