Command Reference Guide

Information Menu 47
OSPF information
Command: /info/l3/ospf
[OSPF Information Menu]
general - Show general information
aindex - Show area(s) information
if - Show interface(s) information
virtual - Show details of virtual links
nbr - Show neighbor(s) information
dbase - Database Menu
sumaddr - Show summary address list
nsumadd - Show NSSA summary address list
routes - Show OSPF routes
dump - Show OSPF information
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Menu options.
Table 32 OSPF information
Command Usage
general
Displays general OSPF information.
aindex <0-2>
Displays area information for a particular area index. If no
parameter is supplied, it displays area information for all the
areas.
if <1-256>
Displays interface information for a particular interface. If no
parameter is supplied, it displays information for all the
interfaces.
virtual
Displays information about all the configured virtual links.
nbr <nbr router-id (A.B.C.D)>
Displays the status of a neighbor with a particular router ID. If
no router ID is supplied, it displays the information about all
the current neighbors.
dbase
Displays OSPF database menu.
sumaddr <0-2>
Displays the list of summary ranges belonging to non-NSSA
areas.
nsumadd <0-2>
Displays the list of summary ranges belonging to NSSA areas.
routes
Displays OSPF routing table.
dump
Displays all OSPF information.