Setup Guide

ManualsBrandsHP ManualsAll in One PrinterHP PSC 1410v All-in-One Printer

HP Photosmart 2600/2700 series all-in-one

User Guide

HP Photosmart 2600/2700 series all-in-one

User Guide

control panel overlay

(sticker, may be pre-

attached)

Start Here

Important: Do not connect the USB cable

until Step 15 or software may not install

properly.

Remove all tape and components

Locate components

Windows CD

Macintosh CD

User Guide

print cartridges

power cord and

adapter

USB cable

HP PSC 1400 All-in-One series Setup Guide

The contents of your box may differ.

Follow the steps in order. If you have problems during setup, see Troubleshooting on page 7.

a Remove all tape.

b Lower the paper tray, and then the access

door. Remove the shipping material and

components.

* Purchased separately.

Summary of content (8 pages)

PAGE 1
Start Here Important: Do not connect the USB cable until Step 15 or software may not install properly. 1 Follow the steps in order. If you have problems during setup, see Troubleshooting on page 7. 2 Remove all tape and components a Remove all tape. b Lower the paper tray, and then the access door. Remove the shipping material and components.
PAGE 2
4 Attach the control panel overlay (if not attached) a Bend the bottom of the control panel overlay. b Remove the bottom tab and the backing from the overlay. c Lift the lid. Attach the overlay to the device. d Press down on the overlay to ensure it is firmly attached. CAUTION: The control panel overlay must be attached for the HP All-in-One to work! 5 Connect the power cord and adapter Important: Do not connect the USB cable until instructed later in this guide.
PAGE 3
6 Press the On/Resume button On/ Resume 7 After you press the On/Resume button, the green light blinks, and then becomes solid. This may take up to a minute. Load plain white paper 2 1 3 4 CAUTION: To avoid paper jams, do not force paper too far into the tray. 8 Open access door Lower the access door until it stops. Make sure the print carriage moves to the center. The device must be On before you can insert the print cartridges.
PAGE 4
10 Insert the tri-color print cartridge a Hold the tri-color print cartridge with the blue HP logo on top. b Place the tri-color print cartridge in front of the left slot. c Push the cartridge firmly into the slot until it snaps into place. 11 Insert the black print cartridge a Hold the black print cartridge with the blue HP logo on top. b Place the black print cartridge in front of the right slot. c Push the cartridge firmly into the slot until it snaps into place. d Close the access door.
PAGE 5
12 Align the print cartridges After you insert the cartridges, a print cartridge alignment page prints. (This may take a few minutes.) a Lift the lid. Place the top of alignment page face down in the left front corner of the glass. Close the lid. b Press the Scan button. After the On/Resume light stops blinking, alignment is complete. Recycle or discard the alignment page. 13 Turn on your computer a Turn on your computer, login if necessary, and then wait for the desktop to appear.
PAGE 6
15 Connect the USB cable Windows Users: Macintosh Users: You may have to wait several minutes before you see the onscreen prompt to connect the USB cable. Connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer. Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer. If you do not see these screens, see Troubleshooting on page 7.
PAGE 7
16 Finish software installation Windows Users: Macintosh Users: Follow the onscreen instructions. Complete the Sign up now screen. Congratulations on completing the setup! a Insert the HP All-in-One Macintosh CD. b Double-click the HP All-in-One Installer icon. c Make sure you complete all screens, including the Setup Assistant. Congratulations on completing the setup! Troubleshooting Problem: (Windows only) You did not see the screen telling you when to connect the USB cable.
PAGE 8
Control Panel Overview *Q7286-90216* *Q7286-90216* Q7286-90216 1 on/resume 2 check paper 3 check print cartridges 4 cancel 5 number of copies 1 On/Resume button: Powers on. Use after correcting a paper jam or print cartridge problem. 2 Check Paper light: Indicates paper is not loaded correctly or there is a jam. 3 Check Print Cartridges light: Indicates a print cartridge needs to be cleaned or replaced; or the access door is open. 4 Cancel button: Stops a job.