User's Manual
Table Of Contents
- Preface
- Package Contents
- Getting Started
- Using the Touch Screen
- Recording Photos, Videos and Voices
- Taking Photos
- Using Voices Recording
- Recording Videos
- Using the Stabilizer Feature
- Setting the Zoom Control
- Using Flash Features
- Setting the Focus Mode
- Setting the Drive Mode
- Setting the AF Area/Face tracking/Touch Shot
- Using the Record Menu
- Setting the Scene Mode
- Setting Photo Size
- Setting Quality
- Setting EV Compensation
- Setting White Balance
- Setting Metering
- Setting AEB
- Setting AF area
- Setting AF Lamp
- Setting Sharpness
- Setting Saturation
- Setting Contrast
- Setting Flash
- Setting Drive Mode
- Setting Focus Mode
- Setting Color Mode
- Setting the Digital Zoom
- Setting the Date Stamp
- Setting Auto Review
- Pre-Record
- Playback
- Using the Setup Menu
- Making Connections
- Appendix
- Troubleshooting
- Getting Help
4
5
Getting Started
Attach the Camera Strap
To reduce the risk of dropping the camera, it is strongly
recommended to attach and use the provided camera strap.
Charging the Battery
The battery that comes along with your package is not fully charged. You need to charge the battery before using
the camera.
Insert the battery into the battery charger as shown.1.
Connect the power cord to the battery charger.2.
Plug the power cord to the main outlet.3.
The battery charging time is 2 hours.
Inserting the Battery
Follow these instructions to insert the rechargeable battery into the battery/memory card compartment.
Please read “Battery Information” on page 2 before inserting/removing battery.
If the battery are already installed, make sure to power off 1.
the camera before removing and inserting recharged or new
battery.
Open the battery/memory card compartment at the bottom 2.
of the camera.