HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

Figure 59: Specify Network Path dialog box
Table 51: Specify Network Path dialog box text strings
Title of dialog box Text in dialog box User options and descriptions
Specify Network Path Type the network path or the queue
name of your printer. If you do not know
its name, click Browse to view the
available network printers.
Network path or queue name:
Browse ...[button]
If you type a network path or queue
name, Next takes you to the Cable Type
Selection dialog box.
NOTE: If you reached this dialog box
from the Connected to Selection dialog
box, Next takes you to the Installation
Type dialog box.
Click Browse to bring up a list of devices
available on the network.
Back returns you to the Network Setup
dialog box.
Cancel takes you to the Exit Setup
dialog box.
Figure 60: Set Network Communication Mode dialog box
Table 52: Set Network Communication Mode dialog box text strings
Title of dialog box Text in dialog box User options and descriptions
Set Network Communication
Mode
Select a communication mode for
this printer
Windows TCP/IP (recommended)
other modes listed]
TCP/IP Settings
Use default port name [check box]
Select a communication mode and
type the appropriate address
information.
After you have specified a
communications mode, Next takes
you to the printer Model dialog
box.
Software Technical Reference Installing Windows printing system components 145