HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

Whenever a constraint message appears with the OK or Cancel button, the interpretation of the button is as follows:
•
Clicking OK accepts the change that was just made, and the driver then resets the conflicting control to a setting
that is compatible with the new value.
•
Clicking Cancel rejects the change that was just made, returning the control to its previous value.
Bubble Help
Bubble Help features a graphical icon resembling a cartoon speech bubble with a small i in it, representing the
international symbol for information. The following illustration shows Bubble Help icons on a driver tab.
Figure 11: A property page with Bubble Help icons
The bubble typically appears next to a disabled control, although it can also accompany an enabled control if there is
an important note concerning its use. Moving the pointer over the bubble changes the arrow to a gloved hand, which
indicates that the area underneath the pointer is selectable. When the bubble is selected by using either the mouse or
the keyboard, a message box appears that contains a brief explanation about why the control is disabled and what can
be done to enable it. If the control is not disabled, the message is a tip or a precaution to be aware of when using that
particular feature.
The following table lists Bubble Help messages and the conditions that cause them to appear.
Table 5: Bubble help messages
Condition Effect Message
Finishing tab: Pages per Sheet is
greater than 1
Finishing tab: Booklet Printing
is not available if Print on Both
Sides check box is selected.
To use this feature, set Pages per
Sheet to 1.
46 Driver features Software Technical Reference