HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

Figure 24: Destination tab
Destination Features
The Destination Features group box provides controls for Job Storage. This group box is only visible if the Printer
Hard Disk and Job Storage Enabled check boxes are selected in the More . . . Configuration Options dialog box
that is available on the Configure tab.
Hardware configuration and availability of Job Storage options
The Job Storage options available to you depends on whether your printer has an optional hard disk installed. Some
Job Storage options require a printer hard disk (an optional HP EIO disk drive).
The Quick Copy and Stored Job options require the installation of a printer hard disk. To use all four of the Job
Storage options, the printer must have the optional hard disk installed, the Printer Hard Disk selected in the More
dialog box of the Configure tab, and the print driver configured to use hard-disk storage.
Configuring the printer driver for a printer hard disk
If the print driver on your computer is not yet configured to use the hard disk, follow these steps:
Note
These steps must be completed for each driver.
1
Double-click the My Computer icon. This opens the My Computer window.
2
Open the Printers window.
70 Driver features Software Technical Reference