HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

Configure tab features
Use the Configure tab to tell the driver about the hardware configuration of the printer. If bidirectional communication
is enabled in a supported environment, set up this tab by clicking the Update Now button. If your environment does
not support bidirectional communication, the Update Now button is unavailable, so you must manually configure the
options on this tab.
The Configure tab is available when the driver is opened from the Printers folder by clicking Properties. When you
open the driver from within a program, the Configure tab is not visible (with a few exceptions, such as when using
Excel 5.0 or Corel (R) Chart 4.0). When opened from the Printers folder, the Configure tab looks like the following
illustration.
Figure 27: Configure tab
The printer image in the lower-right portion of the Configure tab represents the current physical configuration of the
printer and corresponds to its configuration data, either obtained automatically through bidirectional communication or
configured manually. It should look the same as the image that appears in the same location on the Paper tab and the
Destination tab. For more information, see "Paper tab features."
Note
The printer image shown in the illustration might differ from your HP LaserJet 4200 or 4300 series
printer, depending on the model number and accessory devices that are installed.
Printer Model group box
In the Printer Model group box, the driver title remains HP LaserJet 4200 or HP LaserJet 4300 for all models.
Selection of another printer bundle makes the appropriate changes to other configuration options on the tab.
Software Technical Reference Driver features 77